E-Textiles

SKU: SF-DEV-13814 | Brand: SparkFun

This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable el...

SKU: LB-EAGLED-BUZZ | Brand: Little Bird

EagLED is Little Bird Electronics' wearable development kit. It's a complete Arduino compatible microcontroller that has LEDs, Light Sensor, Push Button and Buzzer built into a snippable board. USB Support The Ea...

SKU: LB-LR0220 | Brand: Little Bird

Light up your E-Textile projects with this set of 5 E-Textile Compatible LED modules. With a working voltage of 3V - 5V and a current of 40mA, these LEDs are perfect for adding a touch of brightness to your wearable e...

SKU: LB-ETEXTILELED-R | Brand: Little Bird

This is a simple single unit RED E-Textile LEDEach unit can be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!These are a thicker PCB tha...

SKU: LB-ETEXTILELED-Y | Brand: Little Bird

This is a simple single unit YELLOW E-Textile LEDEach unit can be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!These are a thicker PCB ...

SKU: LB-ETEXTILELED-G | Brand: Little Bird

This is a simple single unit GREEN E-Textile LEDEach unit can be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!These are a thicker PCB t...

SKU: LB-ETEXTILELED-W | Brand: Little Bird

A sewable white LED module designed for e-textile projects. This single-unit LED can be stitched directly into fabric using conductive thread, making it easy to add illumination to wearable electronics and textile-bas...

SKU: AF-3960 | Brand: Adafruit

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft!  This Conductive Nylon tape goes great with our other interesting materials, such as copper tape, ITO gl...

SKU: SF-DEV-09350 | Brand: SparkFun

This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. The swtiches on each board are rated for 4 volts at 300mA, but will work at 5 volts with a re...

SKU: SF-DEV-08822 | Brand: SparkFun

A 20 mm coin cell battery holder designed for CR2032 batteries. The holder features a pop-in, pop-out mechanism for easy battery changes, and the mounting feet include small holes for sewing onto fabric — making it su...

SKU: SF-DEV-14010 | Brand: SparkFun

A pack of five pink LilyPad LEDs designed for wearable electronics and e-textile projects. The LEDs come attached to one another on a snap-apart strip, ready to be sewn into clothing, accessories, or fabric-based circ...

SKU: AF-659 | Brand: Adafruit

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tut...

SKU: AF-603 | Brand: Adafruit

This 316L stainless steel conductive yarn sits between a thick thread and a thin yarn in weight. Its high conductivity and soft, flexible texture make it particularly well-suited for making touchscreen-compatible glov...

SKU: SF-DEV-08776 | Brand: SparkFun

We designed this board to give the user a low profile button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).LilyPad is a wearable e-textile technology develo...

SKU: AF-3501 | Brand: Adafruit

The Adafruit GEMMA M0 is a tiny, coin-sized microcontroller board designed for wearable electronics and small projects. Despite its quarter-sized footprint, it packs serious power with an ATSAMD21E18 32-bit Cortex M0+...

SKU: LB-ETEXTILELED-O | Brand: Little Bird

This is a simple single unit ORANGE E-Textile LEDEach unit can be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!These are a thicker PCB ...

SKU: LB-LR0335-PI | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant pink when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar...

SKU: LB-ETEXTILEADXL335 | Brand: Little Bird

  This is a three axis accelerometer designed for E-Textiles. Based on the ADXL335 MEMS accelerometer from Analog Devices, this Accelerometer can detect joint movement as well as inclination and vibration. The ...

SKU: AF-1222 | Brand: Adafruit

The Adafruit GEMMA V2 is a tiny, coin-sized wearable microcontroller board powered by an ATtiny85 processor. At just 28 mm in diameter, it's small enough to fit into any sewable or wearable project, and affordable eno...

SKU: AF-1168 | Brand: Adafruit

A silver-coloured woven conductive fabric made from copper and nickel-plated nylon. Highly conductive with a resistance of less than 1 Ω per 30 cm in any direction across the textile. Use it to create soft switches, p...