Distance & Ranging Sensors

SKU: DF-FIT0658 | Brand: DFRobot

This compact 5V inductive proximity switch detects metal objects at distances up to 4mm without physical contact. It features an NPN normally-open output, a fast response time under 1ms, and a 1,000Hz switching freque...

SKU: AF-982 | Brand: Adafruit

The LV-EZ4 from MaxBotix is a compact ultrasonic rangefinder that detects objects from 0 to 254 inches (6.45 metres), with calibrated range output from 6 to 254 inches at 1-inch resolution. Objects closer than 6 inche...

SKU: AF-466 | Brand: Adafruit

The VCNL4010 sensor is a nice way to add a small-distance proximity sensor to your microcontroller project. For longer distances (in the range of cm, you can use a SHARP IR distance sensor, but those are only good ...

SKU: DF-FIT0319 | Brand: DFRobot

This is a photoelectric switch that is composed of emitter and receptor.The emitter consists of a laser diode,and the laser has the characteristics of high precision, good orientation etc.The receptor consists of a p...

SKU: AF-164 | Brand: Adafruit

The Sharp GP2Y0A21YK0F is an infrared distance sensor that measures distances from 10 cm to 80 cm by bouncing IR light off objects. It outputs an analogue voltage proportional to distance — approximately 3 V at 10 cm ...

SKU: SF-SEN-12785 | Brand: SparkFun

This is the SparkFun “Time-of-Flight” Range Finder, a sensor board for the VL6180 distance sensor. Unlike most distance sensors that rely on reflected light intensity or reflected angles to determine range, the VL6180...

SKU: PL-2465 | Brand: Pololu

This small digital distance sensor detects objects between 0.5 cm and 15 cm (0.2″ and 6″) away. With its quick response time, small size, low current draw, and short minimum sensing distance, this sensor is ...

SKU: PL-1135 | Brand: Pololu

This small digital distance sensor detects objects between 2 cm and 10 cm (0.8″ and 4″) away. With its quick response time, small size, and low current draw, this sensor is a good choice for non-contact obje...

SKU: DF-FIT0757 | Brand: DFRobot

These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response t...

SKU: DF-FIT0758 | Brand: DFRobot

These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response t...

SKU: M5-U072 | Brand: Little Bird

The ToF HAT is a high-precision laser-ranging sensor designed for the M5StickC development platform. Built around the VL53L0X Time-of-Flight module and a 940 nm VCSEL emitter, it delivers fast, accurate distance measu...