Device Accessories

Classic arcade buttons in a variety of colours. Ever feel the need to relive the glory days of button mashing in your local arcade? Or possibly you...

ITO is a clear, conductive liquid/film and here we have it as a coating on a 1mm glass sheet. This is a very interesting and fun material, also use...

This handy little adapter lets you use our tiny Raspberry Pi Zero cameras with full-sized Raspberry Pis. Just slot the cable from your camera in...

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in U...

FREE BAG!Limit 1 per person while stocks last!Looking to save the world one plastic bag at a time?  Grab a Little Bird carry bag! These great l...

Type A Male to Micro B Male Length: 1.5m High current 3 amp cable specifically for powering the Raspberry pi boards and any other device or project...

A button is a button, and an LED is a LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large en...

Handy little steel ruler.  20cm long with plastic sleeve to keep it in.

micro:bit LEGO enclosure is a protective case for micro:bit. It is specially designed by DFRobot, made by ABS material. It reserves A-B buttons ...

This low-cost Prop Shield is meant for making light and sound effects on small handheld props and wearable costumes. Audio Amplifier - Clear quali...

The SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry ...

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Di...

This is your standard USB A-Plug to Micro-USB cable. It's 2 meters long so you'll have plenty of cord to work with for those longer extensions. ...

This is a DFRobot exclusive! This is a high quality jumper cable. Hand made with 22AWG multistrand wire and sturdy male pins. Each jumper cable...

This immersible pump can be used to water your plants, make a fountain or waterfall, even change your fish tank wter.It works quietly with the ...

This is a handy AVR programming cable that incorporates both the 10-pin and 6-pin ISP programming interfaces.Cable is about 12" long.

This mounting kit provides you different types of standoffs with screws and nuts which are most commonly used in our projects here at DFRobot. We ...

This kit includes PHR-2, PHR-3 and PHR-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units)....

This is your tried and true white solderless breadboard. It has 2 power buses, 10 columns, and 30 rows - a total of 400 tie in points. All pins ...

These two Short Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers ar...

This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which m...

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement ...

This high quality, low profile, pure copper heatsink is a perfect solution for cooling off small surface-mount components such as stepper motor...