Device Accessories

If you want to connect multiple EL wires/strips/panels up to one inverter, these splitters are quite useful. There is one male connector (goes to ...

These zinc-plated socket head machine screws are 3/16” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64...

These 10" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts ha...

These blue precision disk wheels have an outer diameter of 3”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are idea...

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allow...

Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to ...

These zinc-plated socket head machine screws are 5/8” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64"...

This rubber ring is used to afix ultrasonic sensor. It fits URM37 V4.0 Ultrasonic Sensor For Arduino / Raspberry Pi and URM04 Ultrasonic Sens...

This is an 80W 3-in-1 (3 output ranges) Switching DC Power Supply. Gives a regulated 0-36VDC @ 2.2A, 80W max output. Takes a 100-240VAC, 50/60Hz in...

These 1.25" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, whe...

These 4" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating ...

These servo shaft attachments are great when connected to your 3F Futaba servo spline and used in conjunction with a ServoBlock Kit. These alumi...

These clear nylon screws and nuts can be used to fix your circuit board, sensors and mechanical mountings. Used in applications where moderate s...

This is an inexpensive 3-foot-long HDMI to Mini HDMI cable that you can use to hook up your Raspberry Pi Zero W to a suitable monitor or TV. Heck, ...

These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option...

This is a red colored 40 Pin 2.54 mm(0.1") Single Row Pin Header Strip from DFRobot.These 0.1" header strips are commonly used as low-cost Arduino...

This is a high quality plastic servo horn. It fits DF series servos. Made specifically for DF series servos. SPECIFICATIONS Outsi...

This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth,...

This adapter board is designed to make it easier to use ARM dev boards that use slimmer 2x5 (0.05"/1.27mm pitch) SWD cables for programming.  It...

The Digilent BNC Adapter Board is a simple add-on board intended to be used with the Digilent Analog Discovery 2, which allows you to use standard ...

This is a simple, but very powerful stepper motor with a 4-wire cable attached. This is a Bipolar Motor. Features: Step Angle (degrees) :1.8 2...

Have you ever been to a maker faire? You cann't imagine people there are crazy about stickers and stamps.They collected as many different stick...

These hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your 3F Futaba servo spline. These aluminum servo hu...

These 10" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts ha...