Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302
We have ✅ 6 available of the AF-2130 in our Sydney warehouse.
The Adafruit Mono 2.5W Class D Audio Amplifier delivers powerful sound from a tiny package. Based on the PAM8302 chip, it drives 4–8 ohm speakers at up to 2.5 W with over 90% efficiency — making it ideal for portable and battery-powered audio projects. A significant upgrade over basic LM386-based amplifiers.
The amplifier runs from 2.0–5.5 V DC and includes built-in thermal and over-current protection. An on-board trim pot lets you adjust volume down from the default 24 dB gain. The differential inputs pass through 1.0 µF coupling capacitors, and the bridge-tied output connects directly to the speaker — no connection to ground required.
Key Features
- 2.5 W Output – Into 4 Ω at 10% THD; 1.5 W into 8 Ω (at 5.5 V supply)
- Class D Efficiency – Over 90% efficient at 8 Ω, half-watt load
- Wide Supply Range – 2.0–5.5 V DC, perfect for battery power
- Volume Trim Pot – Adjustable from the fixed 24 dB gain
- Differential Inputs – AC-coupled via 1.0 µF capacitors; tie A− to ground for single-ended sources
- Bridge-Tied Output – Drives speakers directly; not designed to feed another amplifier
- Built-In Protection – Thermal shutdown and short-circuit/over-current protection
- Low Power Draw – 4 mA quiescent, 1 µA in shutdown mode
- Filterless Design – Ferrite bead + capacitors on output; 50 dB PSRR at 1 kHz
Ideal For
- Portable and battery-powered audio projects
- Adding sound output to microcontroller projects
- Alarm and notification systems
- Interactive exhibits and installations
Package Contents
- 1× Adafruit PAM8302 Mono Class D Amplifier Breakout (assembled and tested)
- 1× Header strip
- 1× 3.5 mm screw terminal block (colour may vary)
The Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302 appears in the following collections:
