Arduino

Romeo family is an All-in-One Arduino based control board especially designed for robotics applications from DFRobot. It benefits from the Ardu...

This connector is a double-row, 40-pin (2×20), straight female header strip designed to match 0.1" male headers.

Connect this to that with an IDC cable! This cable has 6 pins (2x3) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long with two sockets...

PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an a...

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that...

This is a box of ten 25ft spools of solid-core wire. The wire is easy to solder to, and when bent it keeps its shape pretty well. We like to have a...

The SparkFun Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. When an external switch or logic signal ...

The DFRduino Nano USB Microcontroller V3.1 (ATMega 328) is a breadboard ready version of the Arduino mini with integrated USB. The arduino Nano...

Features:  This book is a wealth of information, ideal for hobbyist or anybody interested in winding their own transformers. After the introducti...

The SparkFun MIDI Shield board gives your Arduino-based device access to the antiquated, but still widely used and well supported MIDI communica...

INTRODUCTION  Do you need a servo for a tiny little project? Or are you seeking for an affordable solution? This mini metal servo is quite impressi...

INTRODUCTION This product measures soil moisture levels by capacitive sensing, rather than resistive sensing like other types of moisture sensor. I...

INTRODUCTION  The arduino turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in w...

Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well...

INTRODUCTION This is an Arduino Can Bus shield. It is compatible with the Arduino standard interface and can be stacked on an Arduino UNO, Leon...

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find t...

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of...

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can ...

This is an Arduino compatible piezo film vibration sensor. It is made up of flexible piezo film and converter board. The sensor is able to detect ...

This Gravity Analog 20A current sensor is based on the Hall current sensing principle. It can be used for AC or DC current measurement, has a wide...

This is a blue colored 40 Pin 2.54 mm (0.1") single row pin header strip from DFRobot. These 0.1" header strips are commonly used as low-cost A...

The Adafruit Gemma M0 is a super small microcontroller board, with just enough built-in to create many simple projects. It may look small and cu...

This audio adaptor lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with Teensy 4.0 (Rev D). It...