Temperature and Humidity Sensor Module DHT11
We have ✅ 172 available of the LB-LR0029 in our Sydney warehouse.
DHT11 Temperature and Humidity sensor is as powerful as it used to be but easier to use. This DHT11 Arduino temperature and humidity sensor has a full range temperature compensation, low power consumption, long term stability and calibrated digital signal. A high-performance 8-bit microcontroller is integrated in the sensor with calibration-coefficient saved in OTP memory to provide accurate temperature readings.
GND: In electronics, we define a point in a circuit to be a kind of zero volts or 0V reference point, on which to base all other voltage measurements. This point is called ground or GND.
DATA: The DHT11 measures the air and outputs a digital signal on this pin.
3.3V : 'VCC' stands for Voltage Common Collector, we'll connect the VCC pin to 3.3V on the micro:bit
Voltage is the difference in electric potential between two points. As it is difficult to talk about voltage without a reference point, we need another point to compare it to.
It can be programmed in MakeCode editor and the Arduino IDE. Skip to step 7 to program it with the Arduino IDE.
The Temperature and Humidity Sensor Module DHT11 appears in the following collections:
