Products

Attach various pieces of 20mm slotted aluminum extrusion together with this 3-hole plate.Measures 60mm long, 18mm wide, 4mm thick. 5.3m drill holes...

"Courage is found in unlikely places."— J.R.R. Tolkien, The Fellowship of the Ring You might be small. You might be shy. You might even be retirin...

The SCD30 from Sensirion is a high quality Nondispersive Infrared (NDIR) based CO₂ sensor capable of detecting 400 to 10000ppm with an accuracy of ...

The SCD30 from Sensirion is a high quality NDIR based CO₂ sensor capable of detecting 400 to 10000ppm with an accuracy of ±(30ppm+3%). In order ...

The SCD41 from Sensirion is a high quality Photoacoustic based CO₂ sensor capable of detecting 0 to 40000ppm with high accuracy over 400-5000ppm ±(...

Do you need to be able to sense CO2 concentrations of up to 100%? If so, the STC31 is the sensor for you! The Sensirion STC31 thermal conductivity ...

This USB-to-serial adapter lets you easily connect a TTL serial device to a PC by acting as a virtual serial port. The board is a Micro-USB carrier...

These are the highest quality & capacity batteries, the same as shipped with the iCufflinks, iNecklace, Datalogging and GPS Shields, GPS HAT, e...

This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargea...

This is a handy little non-rechargeable CR2016 Lithium Coin Cell Battery!Sitting at 20mm diameter and is 1.6mm thick it's small but packs a punch w...

CR2032 Button Cell Battery - Great for use with the Lilypad Switch Battery HolderAdditional Information Button battery safety information Warning: ...

A perfect match for our sew-able coin cell holder. This non-rechargeable coin cell is CR2032 sized: 20mm diameter, 3.2mm thick. It has a nominal vo...

This is a super beefy non-rechargeable CR2450 Lithium Coin Cell Battery!Coming in at a 24.5mm diameter and 5mm thickness this battery kicks major b...

Already run the Crack the Code unit of work and want another set to teach with? We have put together a replenishment kit for your Crack the Code u...

There is a new version of this kit for 2018 / 2019! This kit contains everything you need for the "Crack the Code" segment in the NSW technology...

Looking to add a few more students sets to your class?  This is the basic Arduino kit that is broken down to a single student set. From this kit...

Already run the Crack the Code unit of work and want to replenish your component box? At Little Bird Electronics we have put together a replenis...

Already run the Crack the Code Unit of Work and want to replenish your component box and student sets? At Little Bird Electronics we have put to...

This kit contains everything you need for the "Crack the Code" segment in the NSW technology curriculum and a few spares of the easy to lose compo...

Perfect for both classroom undertakings and those new to Arduino! Designed to seamlessly plug into any standard Arduino or compatible board, thi...

* NOTE * This is the Crack the Code - Take Home kit WITHOUT the Little Bird Uno R3 board. We suggest 1 kit per student as a take home kit. From ...

Unlock the mysteries of coding and electronics with the Crack the Code V2.0 Kit, specifically designed for the NSW Department of Education's se...

Dive into the world of coding and electronics with the Crack the Code V2.0 Kit! This kit is designed to provide a hands-on learning experience, per...

Here's our little badge of honour for all those crafty and creative souls out there who can turn any disaster into an opportunity: Spills, tears, t...