All Products

SKU: EF-EF11085

A clear battery holder designed for the BBC micro:bit, holding two AAA batteries. Features a built-in on/off switch and a PH2.0 connector that plugs directly into the micro:bit's battery port. The transparent casing lets you see the batteries inside. Specifications Battery Type – 2× AAA (not i...

SKU: LB-LS3429

A pack of 10 silicone-insulated alligator-to-alligator test leads, each 1 metre long. The 4 mm wire gauge and full-size alligator clips make these suitable for general electronics testing, prototyping, and bench work. Supplied in 5 colours (2 of each) for easy circuit identification. Specificati...

SKU: AF-166 · MPN: 166

The Interlink 402 is a round force-sensitive resistor (FSR) with a 12.7 mm (0.5″) sensing area. It changes resistance based on applied pressure — the harder you press, the lower the resistance — making it a simple, low-cost way to detect physical pressure, squeezing, and weight in your projects. ...

SKU: SF-BOB-13906

The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/demultiplexer. The 74HC4051 allows you to turn four I/O pins into eight multifunctional, individually selectable signals, which can be used to do everything from driving eig...

SKU: EF-EF04016

Octopus Non-invasive AC current sensor (TA17-03) Brick is Electronic building blocks, a transformer, an ammeter, a current sensor module, compatible with all kinds of Arduino electronic building blocks / sensor shield. 3P electronic building blocks interface, input 5V - GND, S pin for output a...

SKU: SF-PRT-14494

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1M ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with ver...

SKU: DF-ROB0025

INTRODUCTION The DFRobot 4WD Arduino-Compatible Platform w/Encoders is widely used on the world's self-developed control panel platform. This drive method has a strong obstacle and climbing ability with high strength aluminum alloy body. It features thick acrylic m...

SKU: AF-5587 · MPN: 5587

If you're like me and have trouble keeping your calatheas and pepperomias happy and not overwatering them to root rot ruin, why not take a gander at the Plant Monitor from Ada-friend Monk Makes. Its a super easy and friendly way to get started with sensing & gardening projects with no soldering r...

SKU: EF-EF04034

The Octopus Digital Push Button Brick is a simple momentary button module from ElecFreaks' Octopus series. It connects to Arduino, micro:bit, and other microcontroller boards via a 3-pin buckled connector — no breadboard or soldering required. This blue version features a large button cap for ea...

SKU: AF-3169 · MPN: 3169

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able...

SKU: DF-SEN0305

HuskyLens is an easy-to-use AI vision sensor. It can learn to detect objects, faces, lines, colors and tags just by clicking.Through the UART / I2C port, HuskyLens can connect to Arduino, Raspberry Pi, LattePanda, or micro:bit, and make your very creative projects without playing with complex alg...

SKU: KI-5612

Take your robotics project to the next level with the (i2C) Kitronik 16 Servo Driver Board for the BBC micro:bit.Capable of controlling 16 servos which are powered directly from the board's power supply. The board can be powered either through the terminal blocks or the on-board header for radio ...

SKU: AF-3691 · MPN: 3691

You've done such a great job making your own electronic control panel that the last thing you need are those wires to get pulled out and frizzy. These fancy Panel-Mount Banana Jacks look good and work well. They will snugly hold onto any 4mm banana plug or cable, and have a c...

SKU: ED-BBR-NEB-1 · MPN: BBR-NEB-1

Resource kit only — no floor robots included.Four habitat mats and a set of pushers, aimed at the youngest end of the primary school. Children drive the robot to the animal that lives in the burrow, push a log to clear a path, or work out which creatures belong on the farm and which belong in the...

SKU: ED-80210040 · MPN: 80210040

A BBC micro:bit is required and is not supplied with this kit. The Hummingbird Bit controller runs on a micro:bit, so add one to your order — we stock them separately. The Hummingbird Bit Premium Kit is a box of lights, sensors and motors that students bolt onto whatever they can find: cardboard,...

SKU: SF-PRT-14491

A pack of 20 through-hole 10 kΩ resistors with thick leads designed for a snug fit in solderless breadboards. These are standard ¼ W, ±5% tolerance PTH resistors — ideal for pull-ups, pull-downs, current limiting, and general prototyping. Specifications Resistance – 10 kΩ Tolerance – ±5% Pow...

SKU: AF-5619

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reusable and do not require any crimping!These are 1 to 1 wire blocks: there is one separate input a...

SKU: AF-3810 · MPN: 3810

But what do you do when you want to add LEGO-compatible bricks and parts to your robotics project? This is the axle you need! Just push the axle housing end onto the shaft of your DC Gearbox "TT" motor, and it's ready to adapt to the standard LEGO-compatible cross axle parts, including ge...

SKU: LB-IR-REMOTE

Introducing the perfect addition to your robotics classroom - the IR Remote Control for use with Maqueen and Owl Robots! This user-friendly remote is powered by 2 AA batteries and features numbers 0-9 and direction buttons, making it compatible with all of our IR robots and modules.Effortlessly c...

SKU: AF-1780 · MPN: 1780

This audio adapter lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with a Teensy 3.2, 3.5 or 3.6. It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input.The audio chip connects to Te...