All Products
AI Overview
For a STEMMA QT setup you’ll typically want a 4-pin JST-SH (1.0mm pitch) to JST-SH cable (Qwiic/STEMMA QT compatible). Pick a length that fits your build:
Standard STEMMA QT / Qwiic JST-SH to JST-SH cables
- STEMMA QT / Qwiic JST SH 4-Pin Cable (50mm) ($2.15)
- JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long (100mm) ($2.15)
- STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long (200mm) ($2.80)
- STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long (300mm) ($2.85)
- STEMMA QT / Qwiic JST SH 4-Pin Cable - 400mm long (400mm) ($3.25)
To plug a STEMMA QT device into 0.1" headers/breadboard
- STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets - 150mm Long (JST-SH to female sockets, 150mm) ($2.25)
- JST SH 4-Pin to Premium Male Headers Cable - Qwiic Compatible - 150mm Long (JST-SH to male headers, 150mm) ($2.25)
- Adafruit Qwiic / Stemma QT Breakout Board (breaks out JST-SH to 0.1" pins) ($4.00)
Adapters (if you’re bridging ecosystems)
- 4-pin JST PH to JST SH Cable - STEMMA / Grove to QT / Qwiic - 200mm long (STEMMA/Grove JST-PH ↔ QT/Qwiic JST-SH, 200mm) ($2.15)
- Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long (Grove ↔ JST-SH, 100mm) ($4.15)
- Qwiic Cable - Grove Adapter (150mm) (Qwiic ↔ Grove, 150mm) ($4.95)
Showing 61-80 of 90 products · 10 unavailable products hidden
Adafruit VL53L4CX Time of Flight Distance Sensor - ~1 to 6000mm
·
The Adafruit VL53L4CX is the longest-range Time-of-Flight (ToF) distance sensor in ST's VL5 series, measuring from approximately 1 mm up to 6000 mm (6 metres). It uses an invisible laser to precisely time how long light takes to bounce back, delivering accurate distance readings without the linea...
Adafruit TCA8418 Keypad Matrix and GPIO Expander Breakout
·
The Adafruit TCA8418 Keypad Matrix and GPIO Expander Breakout is a versatile I2C GPIO expander and keypad matrix driver. With 18 I/O pins (10 columns and 8 rows), it can manage up to 80 switches in a matrix configuration or serve as individual GPIO inputs and outputs. Whether you need more butto...
Adafruit Sensirion SHT45 Precision Temperature & Humidity Sensor
The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. This version does not include a PTFE membrane, making it suitable for clean indoor environments where dust and water prote...
Adafruit S-35710 Low-Power Wake Up Timer Breakout
·
The Adafruit S-35710 Wake Up Timer Breakout is an ultra-low-power watchdog timer that can be programmed to trigger an alarm from 1 second up to 194 days, using a 24-bit second counter. Drawing only 0.2 µA, it's an interesting alternative to a real-time clock for projects that need a separate, ind...
Adafruit USB Type C Power Delivery Dummy - I2C or Switchable
·
The Adafruit USB Type C Power Delivery Dummy (I2C or Switchable) lets you tap into USB-C Power Delivery to get 5V, 9V, 12V, 15V, 18V, or 20V from any compatible USB-C charger or wall adapter — no soldering required. Built around the HUSB238 PDL003A E-Marker variant, it can request up to 5A for a ...
4-pin JST PH to JST SH Cable - STEMMA / Grove to QT / Qwiic - 200mm long
·
A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the two connector ecosystems. Both connectors have a latching feel for secure conn...
TMAG5273 A1 3D Hall Effect Magnetometer Breakout
·
This breakout makes it easy to add 3D Hall-effect magnetic sensing to a microcontroller project. The TMAG5273 integrates independent X, Y and Z Hall-effect sensors with a 12-bit ADC, giving you magnetic measurements over I2C plus a built-in temperature sensor for basic temperature readings.It is ...
MLX90632 FIR Remote Thermal Temperature Sensor
·
This compact breakout uses Melexis' MLX90632 FIR sensor to read the temperature of a target without making contact. It's handy for checking surfaces that are hot, cold, moving, delicate or awkward to reach with a probe, and it can also report its own local on-chip temperature.The fitted MLX90632S...
AD5693R 16-Bit DAC Breakout Board with I2C
·
This compact breakout gives you a high-resolution analogue voltage output from a simple I2C interface, based on the AD5693R 16-bit DAC. It includes a temperature-compensated 2.5V internal reference, making it a handy choice when you want finer output control than a typical 12-bit DAC can provide....
Adafruit BME280 I2C or SPI Temperature Humidity Pressure Sensor
·
Measure indoor environmental conditions with Bosch’s BME280 sensor on an easy-to-use Adafruit breakout. It combines temperature, barometric pressure and humidity sensing in a compact board that suits weather stations, room monitoring, data logging and altitude-aware projects.The sensor can commun...
Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long
A 100 mm adapter cable that bridges the gap between Grove and STEMMA QT / Qwiic ecosystems. One end features a Grove connector, the other a JST SH (STEMMA QT / Qwiic compatible) connector — making it easy to mix and match sensors, breakouts, and host boards across different connector standards. ...
JST-PH 2-pin Jumper Cable - 100mm long
·
We use 2 pin JST PH connectors for all our battery packs, and if you want to put a board in series, like our LC709203F Stemma QT battery gauge, this cable will be very handy! Both ends have a JST PH 2mm pitch 2-pin plug. Between the two, 100mm of color coded wire - red for power, black for gro...
STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long
·
This 300 mm (11.8") 4-wire cable is fitted with JST-SH female 4-pin connectors on both ends. The 1 mm pitch JST-SH connectors are more compact than the chunkier 2 mm pitch JST-PH, while still providing a secure latching connection that is easy to insert and remove. Compatible with both STEMMA QT...
Adafruit FeatherWing 128x64 OLED Add-on
·
Add a crisp monochrome display and simple user controls to your Feather project with this fully assembled FeatherWing. It combines a 128x64 white OLED screen with three user buttons labelled A, B and C, plus a reset button, so you can build compact menus, status displays, and handheld interfaces ...
STEMMA QT / Qwiic JST SH 4-Pin Cable
·
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic or STEMMA ...
STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets - 150mm Long
·
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.Th...
STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long
·
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.This cable can be used with Qwiic or S...
STEMMA QT / Qwiic JST SH 4-Pin Cable - 400mm long
·
This 4-wire cable is a little over 400mm / 15.7" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic bo...
Adafruit NAU7802 24-Bit ADC - STEMMA QT / Qwiic
·
The Adafruit NAU7802 is a high-resolution 24-bit differential ADC breakout designed specifically for reading strain gauges, load cells, and other Wheatstone bridge sensors. With built-in gain amplification and calibration circuitry, it converts the tiny voltage changes from bridge sensors into pr...
Adafruit MPU-6050 6-DoF Accel and Gyro Sensor - STEMMA QT Qwiic
·
The Adafruit MPU-6050 breakout combines a 3-axis accelerometer and 3-axis gyroscope in a single compact sensor, providing 6 degrees of freedom (6-DoF) motion sensing over I2C. A proven and popular IMU, the MPU-6050 is ideal for detecting orientation, movement, and rotation in robotics, wearables,...