All Products

SKU: AF-5327 · MPN: 5327

This compact female socket header uses a fine 0.05" (1.27mm) pitch in a 2×5, 10-pin layout, making it a handy connector for small PCBs, sensors and prototyping work.It was originally designed for use with the PMSA003I PM2.5 air quality sensor and its breakout board, but it is also useful anywhere...

SKU: SF-COM-22002 · MPN: COM-22002

This is a Panasonic FK series SMT aluminium electrolytic capacitor with a 220µF capacitance, ±20% tolerance and 6.3V rated voltage. It is a polarised surface-mount part intended for compact PCB designs.The FK series is designed for low impedance in a miniature package, with endurance rated up to ...

SKU: SF-DEV-15590 · MPN: DEV-15590

Bring everyday builds to life quickly with this small, robust Arduino board in the classic Nano footprint. It is designed for fast prototyping and compact projects, from experiments and wearables through to cosplay, robotics, drones and 3D printing.The board is based on the ATMega4809 AVR process...

SKU: SF-DEV-28370 · MPN: DEV-28370

This lockable Teensy 4.1 variant combines the high-performance Teensy 4.1 platform with production-focused code security, while omitting the Ethernet PHY for projects that do not need wired networking. It is built around the NXP MIMXRT1062DVJ6B ARM Cortex-M7 processor running at 600 MHz, with 8 M...

SKU: RP-PICO-HEADERS

The Raspberry Pi Pico is a compact, low-cost microcontroller development board built on the RP2040 — Raspberry Pi's own custom ARM silicon. This version comes with headers pre-soldered and a Micro-USB cable included, ready to use straight away. Powered by a dual-core ARM Cortex-M0+ processor run...

SKU: AF-3718 · MPN: 3718

Are you still looking for that perfect PCB holder? The hefty yet portable Heavy Stainless Steel PCB Holder will rock out when you rework out. These were initially marketed for people doing cell phone repair and rework and we've found this to be an excellent vise for SMT work in particular...

SKU: AF-4505 · MPN: 4505

The PMSA003I is a compact particulate matter sensor that measures PM1.0, PM2.5, and PM10.0 concentrations using laser scattering. Unlike most PM sensors that use UART, this version features an I2C interface, making it straightforward to use with Arduino, Raspberry Pi, and other microcontrollers w...

SKU: AF-4899 · MPN: 4899

The Adafruit SPI Flash SD Card breakout features an XTSD 512 MB chip — an SD card in an SMT package that you can wire up like standard SPI flash but use with existing SD card libraries. It comes pre-formatted as a 512 MB FAT volume and works straight away with the built-in SD library in Arduino o...

SKU: AF-5253 · MPN: 5253

A weighted metal rework station designed for SMT soldering and electronics repair. The 600 g metal plate keeps your workspace stable, while four magnetic PCB holders secure boards of any shape between 0.2–2 mm thick. Two adjustable alligator clip arms attach at the end of the plate for holding wi...

SKU: WS-31278 · MPN: 31278

Four versions — check the Wireless option before you order This page sells all four factory versions of the Luckfox Core1106 Smart 86 Box. Two of them have Wi-Fi and Bluetooth fitted, and two do not. Wireless is not an add-on — it is soldered at the factory, so you cannot add it later. Pick your ...

SKU: SF-PRT-26986 · MPN: PRT-26986

This round steel SMT spacer provides an internal M2.5 thread for creating a compact threaded mounting point directly on a PCB or assembly.It is reflow compatible, so it can be placed during surface-mount assembly and soldered using solder cream. The spacer has a tin surface finish and is supplied...

SKU: AF-1863 · MPN: 1863

This switched JST connector is the best way to quickly prototype with our LiPoly batteries. We paired a genuine JST connector with a slide switch that can do up to 600mA. Both are soldered onto a breadboard-friendly breakout. There's two ground pins, one 'switched' power pin, and one pin that ...

SKU: AF-1862 · MPN: 1862

A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin cell holder and 3xAAA battery pack. We also have simple JST pigtails that mate w...

SKU: AF-1230 · MPN: 1230

Beguiled by a fancy new chip, regulator or transistor that is only available in a SOT23-3, SOT23-5, SOT23-6, SOT-223, SOT-89, or TO-252 pinout? This set of breakout PCBs will make your life much much easier and get you prototyping faster than ever. This set comes with 3 different boards which ...

SKU: SF-COM-17734 · MPN: COM-17734

This basic blue surface-mount LED is a compact 1206 component suited to indicators, status lights and small embedded electronics projects.It is the same blue LED used on SparkFun's RedBoard line of products and many more, making it a handy replacement or matching part for compatible designs.A dat...

SKU: AF-2491 · MPN: 2491

The ESP-12S is a compact WiFi module based on the ESP8266 processor from Espressif. Running at 80 MHz with a full WiFi front-end (client and access point modes) and built-in TCP/IP stack with DNS support, it's designed for embedding directly into custom PCB designs. The module features large, ea...

SKU: AF-520 · MPN: 520

A compact hard-covered booklet designed for organising and storing SMT component tapes. The translucent flip pages make it easy to identify parts at a glance, and the flexible material lets you slide tape strips in and out with ease. Write on the slots with a marker to label your tiny components....

SKU: AF-2184 · MPN: 2184

These five blank pages are designed for keeping taped parts, specifically for 24mm or smaller tape. Each page has 6 rows or slots that you can slide your tape into. The slots are 3.5" long. These pages are meant for our Blank SMT Storage Book. We also carry pages for 8mm tape. ...

SKU: AF-2183 · MPN: 2183

A set of five blank storage pages designed to hold strips of 8 mm SMT component tape — the most common tape width for surface-mount parts. Each page has 12 slots, with each slot measuring 89 mm (3.5") long, keeping your taped components organised and accessible. Key Features 12 Slots Per Page ...

SKU: AF-2187 · MPN: 2187

A custom-made 2×20 short female header designed for surface-mount (SMT) Raspberry Pi HAT designs. This header provides the slimmest possible profile when you need a low-clearance connection between your HAT and a Raspberry Pi. While it requires SMT soldering skills (more challenging than standar...