SparkFun
Panasonic FK 220µF 6.3V SMD Aluminium Electrolytic Capacitor
· MPN: COM-22002
This is a Panasonic FK series SMT aluminium electrolytic capacitor with a 220µF capacitance, ±20% tolerance and 6.3V rated voltage. It is a polarised surface...
Get notified when back in stock
This is a Panasonic FK series SMT aluminium electrolytic capacitor with a 220µF capacitance, ±20% tolerance and 6.3V rated voltage. It is a polarised surface-mount part intended for compact PCB designs.
The FK series is designed for low impedance in a miniature package, with endurance rated up to 2000 hours at +105°C and operation down to -55°C. It is also RoHS compliant and rated to AEC-Q200.
Use it for smoothing, bulk capacitance and decoupling in low-voltage electronics where a compact SMD electrolytic capacitor is required.
Features:
- High endurance: up to 2000 hours at +105°C
- Temperature range: as low as -55°C
- Low impedance: in a miniature package
- Compliance: RoHS compliant
- Vibration-proof: available in a vibration-proof product
- Operating voltage range: between 6.3VDC
Specifications:
- Capacitance: 220 µF
- Tolerance: ±20%
- Voltage - Rated: 6.3 V
- Lifetime @ Temp.: 2000 Hrs @ 105°C
- Operating Temperature: -55°C ~ 105°C
- Polarization: Polar
- Ratings: AEC-Q200
- Ripple Current @ Low Frequency: 180 mA @ 120 Hz
- Ripple Current @ High Frequency: 240 mA @ 100 kHz
- Impedance: 360 mOhms
- Size / Dimension: 0.248" Dia (6.30mm)
- Height - Seated (Max): 0.240" (6.10mm)
- Surface Mount Land Size: 0.260" L x 0.260" W (6.60mm x 6.60mm)
Jargon buster
Plain-language definitions for the technical terms used above.
- capacitance
- Capacitance is the amount of electrical charge a capacitor can store, usually measured in farads such as uF. Choosing the right capacitance value matters because it affects how well a circuit filters power, handles timing, or stores short bursts of energy.
- electrolytic capacitor
- An electrolytic capacitor is a type of capacitor that can store relatively large amounts of electrical charge in a small package. It is commonly used for smoothing power supplies, reducing noise, and short-term energy storage, but it usually has polarity so it must be installed the correct way around.
- Impedance
- Impedance is the total opposition a component or circuit presents to alternating current, measured in ohms, combining resistance with frequency-dependent reactance. It appears in many contexts, such as matching a speaker's impedance (for example 4 ohm or 8 ohm) to an amplifier or the input and output impedance of signal circuits, and a correct match helps avoid weak signals, distortion or damage.
- PCB
- A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.
- SMD
- SMD means surface-mount device, a component style designed to be soldered directly onto the surface of a circuit board rather than through holes. SMD parts are compact and mounted flat on the board, which suits smaller and mass-produced designs.
- Tolerance
- Tolerance tells you how far the real resistance value may be from the printed value. A 1% resistor is useful when a circuit needs more predictable behaviour than a looser 5% or 10% part.
Find this product in
Panasonic FK 220µF 6.3V Capacitor Datasheet
Datasheet · 967.3 KB · Click any page to view full size
Supplier page — sparkfun.com
Supplier Description · 459.5 KB · Click any page to view full size
