All Products

SKU: SF-DEV-14013

A pack of five red LilyPad LEDs on a snap-apart strip. Each LED has large sew tabs for stitching into fabric with conductive thread, making them ideal for wearable electronics and e-textile projects. The ultra-thin 0.8 mm PCB lies flat against fabric. Key Features 5× Red LEDs – Snap-apart stri...

SKU: DF-FIT0188

A compact 10-segment LED bar graph in super bright red. Each segment is an individual LED housed together in a standard-size package, making it easy to drive from a microcontroller or shift register. Low power consumption and categorised luminous intensity make it suitable for both prototyping an...

SKU: DF-FIT0008-R

A compact 170-point solderless breadboard with a self-adhesive backing for mounting to project enclosures, robot chassis, or proto shields. The red board measures 46 × 36 mm (1.8 × 1.4″) and is compatible with the Arduino Proto Shield. Key Features 170 Tie Points – 17 × 5 × 2 point layout Sel...

SKU: DF-DFR0130-R

This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading straight away. Easy to use, and is a good company with robotic applications. Th...

SKU: AF-1877 · MPN: 1877

Super-flexible silicone-sheathed stranded-core wire that handles the heat and abuse that standard PVC wire can't. Rated for temperatures from −60°C to 200°C and voltages up to 600 V, this wire is built for demanding projects. The soft silicone insulation makes this wire extremely supple and easy...

SKU: AF-3700 · MPN: 3700

A candy-coloured zipper case that's the perfect size for makers on the go. Instead of tossing your Raspberry Pi or Metro M0 Express into the abyss of your backpack, keep it safe and organised in this compact pouch. Sized to comfortably fit microcontrollers and single-board computers under 100 × ...

SKU: LB-ETEXTILELED-R

This is a simple single unit RED E-Textile LEDEach unit can be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!These are a thicker PCB than the Sparkfun Lilypad LEDs

SKU: AF-559 · MPN: 559

A chrome-plated metal pushbutton with an illuminated red LED ring, designed for panel mounting in a 16 mm hole. The weatherproof design includes a rubber gasket to seal the enclosure against water ingress, making it suitable for both indoor and outdoor applications. The switch and LED are electr...

SKU: AF-1439 · MPN: 1439

A 16mm illuminated pushbutton with a built-in red LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independently ...

SKU: LB-LS0070

The knob is designed to set directly on the potentiometer's ridges so it's an easy & secure fit. It has a nice feel, with a solid grip, tweaking it is quite fulfilling This is the red version and it has a nice deep colour on the inside with a striking red line on the outside for great visibili...

SKU: AF-4042 · MPN: 4042

This LED Is super chonky! Bigger than your average LED, it has a big, bold, and beautiful diffused body that measures approximately 18mm diameter. Inside is nestled a bi-color red and green LED, just like you're familiar with. Each with about 2.3V forward voltage. Add a resistor in series and con...

SKU: AF-1054 · MPN: 1054

This compact encapsulated laser diode module produces a red 650nm beam with 5mW output, making it useful for embedded electronics projects that need a simple visible laser source.It includes an integrated driver, so it is not a standalone laser pointer. Connect a 3 to 5VDC power supply to the red...

SKU: AF-3130 · MPN: 3130

The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in red adds a bright, 4-character 14-segment LED display to any Feather board. Each character can display letters, numbers, and symbols, making it ideal for clocks, status indicators, sensor readouts, and more. Driven by the HT16K33 I2C ma...

SKU: AF-3165 · MPN: 3165

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able...

SKU: AF-2366 · MPN: 2366

Now that we have The Single Greatest Raspberry Pi Model A+ Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-on lids and bases to form your favorite combinations.  Buy one base then match different colored lids to your room o...

SKU: AF-2513 · MPN: 2513

A 7.6 m (25 ft) spool of red 26 AWG stranded-core wire with a silicone rubber sheath. Silicone insulation stays soft and flexible across a wide temperature range (up to 200 °C) and is rated for up to 600 V — far more resilient than standard PVC-covered wire in high-temperature or high-flex applic...

SKU: RP-SC0229-1 · MPN: 4301

The official Raspberry Pi Foundation case for the Raspberry Pi 4 Model B. This solid ABS enclosure in the classic red and white colour scheme keeps your Pi secure while providing labelled cut-outs for all connectors: micro HDMI, USB-C power, Ethernet, USB ports, and the GPIO header. The snap-fit...

SKU: AF-4778 · MPN: 4778

Add a vibrant tri-colour eInk display to your Feather project with this 2.9" FeatherWing. The panel displays red, black, and white pixels at 296×128 resolution that remain visible even with power completely disconnected — just like printed paper, but with the added impact of colour. The FeatherW...

SKU: LB-EAGLED-LED-R

Made here in Sydney these are our very own EagLED LED - Red in a pack of 10 These are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or use in Paper Circuits. These have large sew tabs so that you can put your conductive thread through seve...

SKU: LB-LR0589-RED

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in red. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the panel surface. Key Features Momentary Action – Normally open, closes on press 12 ...