All Products
Showing 21-40 of 53 products · 7 unavailable products hidden
Premium Female/Male 'Extension' Jumper Wires - 20 x 6
·
These Female/Male Extension jumper wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbow colors). They have 0.1" male header contacts on one end and 0....
2x2 AA Battery Holder with Premium Jumper Header Wires
·
This compact 2×2 AA battery holder connects four AA batteries in series, providing a nominal 6 V DC output (alkaline) or 4.8 V DC (rechargeable NiMH). The premium jumper header wires plug directly into a breadboard — no stripping or soldering required for prototyping. The square 2×2 configuratio...
2 x AA Battery Holder with Premium Jumper Header Wires
·
A 2×AA battery holder with premium jumper header wires that plug directly into a breadboard — no stripping, twisting, or fighting with thin leads. Two AA batteries in series provide approximately 2.5V to 3V, making this a convenient power source for breadboard prototyping. Key Features Breadbo...
Premium Male/Male Jumper Wires - 20 x 3 (75mm)
·
A pack of 20 premium male-to-male jumper wires in a convenient ribbon cable format. Each wire is 75 mm (3") long with 0.1" (2.54 mm) male header contacts on both ends, fitting cleanly onto standard-pitch headers. The 20-pin ribbon includes two wires in each of ten rainbow colours for easy identi...
Jumper Wires Premium 6 M/M Pack of 100
These are 155mm long jumpers terminated as male to male. Use these to jumper from any female header on any board, to any other female header. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (colors shown). Note: The pictures for th...
Jumper Wires Premium 12 M/M Pack of 10
A pack of 10 premium male-to-male jumper wires, 12" (30cm) long. Compatible with breadboards, Arduino headers, and any 0.1" (2.54mm) pitch prototyping board. Assorted colours for easy circuit identification. Specifications Type – Male to Male Length – 12" (30cm) Pitch – 0.1" (2.54mm) compati...
Premium Silicone Covered Extension Jumper Wires - 200mm x 40
·
These premium extension jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafruit black). They have 0.1" socket 'female' header contacts on one end and 0.1" p...
Jumper Wires 7.8 F/M (High Quality 30 Pack)
INTRODUCTION Premium quality jumper wires for prototyping. Made with 26AWG multi-strand wire and sturdy male pins. Each jumper wire is approximately 210mm in length. Each pack comes with 30 jumper wires in a variety of colours. These jumper wires are perfect for breadboards, Arduino cre...
Jumper Wires Premium 12 M/F Pack of 10
A pack of 10 premium 12″ (30 cm) male-to-female jumper wires for breadboarding, prototyping, and connecting to 0.1″ pitch headers. Each wire has a male pin on one end and a female socket on the other, making them versatile for connecting between boards, sensors, and breadboards. The wires sit ne...
40 pin 30CM Jumper wire M/M
A 40-pin ribbon of male-to-male (M/M) jumper wires, 30cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Male-to-Male (M/M) – 0.1″ male header pins on both ends 4...
Premium Male/Female Raw Jumper Wires - 40 x 6
·
Our Raw Male/Female Jumper Wires are perfect for making a custom jumper wire sets for wire harnesses or jumpering between headers on PCBs. These premium jumpers are a little over 6", almost 8" (about 200mm) long and come in a 'strip' of 40 (5 pieces of the ten rainbow colors). The 0.75...
1.5V 400mA 80x60mm Solar Panel with Male Jumper
A compact micro solar panel rated at 1.5 V and 400 mA (0.65 W peak), fitted with pre-soldered male jumper wires for direct breadboard use. Its small 80×60 mm form factor makes it easy to integrate into DIY solar projects and prototyping setups. Key Features 1.5 V / 400 mA Output – 0.65 W peak ...
Alchitry Br V2 Breakout Board
·
The Br V2 is a simple breakout board for Alchitry boards, making the signal pins on the Alchitry headers easier to access for prototyping, wiring and soldered projects.All signal pins are brought out to 0.1" easy-to-solder holes, so you can connect jumper wires, headers or your own circuitry with...
Jumper Wires Premium 6 F/F Pack of 100
A pack of 100 premium female-to-female jumper wires, 155 mm long. Use these to connect any male header to another male header on breadboards, development boards, and breakout modules. Multiple jumpers can be installed side by side on standard 0.1" pitch headers. Specifications Connector Type –...
Jumper Wires Premium 6 F/F Pack of 50
Premium female-to-female jumper wires, 155mm (6″) long, for connecting between male headers on development boards, breakout boards, and breadboards. The 0.1″ pitch connectors fit standard pin headers and can be installed side by side. Specifications Connector Type – Female to Female (F/F) Len...
Premium Female/Female Jumper Wires - 20 x 6 (150mm)
·
Premium female-to-female jumper wires in a convenient 20-pin ribbon cable, perfect for making wire harnesses or jumpering between headers on PCBs. Each wire is 150mm (6") long with 0.1" (2.54mm) female header contacts on both ends, fitting cleanly onto standard-pitch headers. The ribbon strip in...
Jumper Jerky Junior - Male to Male
Rainbow coloured jumper strips, perfect for use with our mini breadboards! At just 100mm in length this jumper jerky is ideal for use on a breadboard or in any situation where space is at a premium. Each strip of jerky contains 40 individual jumper leads, 100mm long, which are easily separated...
Jumper Jerky Junior - Male to Female
Rainbow coloured jumper strips, perfect for use with our mini breadboards! At just 100mm in length this jumper jerky is ideal for use on a breadboard or in any situation where space is at a premium. Each strip of jerky contains 40 individual jumper leads, 100mm long, which are easily separated...
Pico - Quad-Expander IC Test Board
Quad GPIO Expander for Raspberry Pi Pico, Four Sets of Male Headers, USB Power Connector Quad GPIO Expander For Pico Four Sets Of Standard Raspberry Pi Pico GPIO Male Headers, USB-Powered Support Features At A Glance Standard Raspberry Pi Pico female header for direct attaching Raspberr...
Premium Female/Male 'Extension' Jumper Wires - 20 x 12
·
These premium female-to-male extension jumper wires are ideal for making wire harnesses or extending connections between headers on PCBs. Each strip contains 20 wires (2 of each rainbow colour) in a convenient ribbon cable format that can be kept together for organised harnesses or separated into...
