All Products
Showing 21-40 of 45 products · 15 unavailable products hidden
Adafruit LED Glasses Starter Kit
·
The Adafruit LED Glasses Starter Kit includes everything you need to build a complete pair of programmable LED glasses. Pair the 116-LED front panel with the Bluetooth-enabled nRF52840 driver board, snap them onto the included fashion frames, and you're ready to create dazzling wearable light dis...
JST-PH 2-Pin SMT Right Angle Breakout Board
·
A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin cell holder and 3xAAA battery pack. We also have simple JST pigtails that mate w...
Thin Speaker - 4 Ohm, 2.5W, 28mm
A compact, thin speaker ideal for projects where space is tight. At just 28 mm in diameter and approximately 4 mm thick, it fits into enclosures and wearables where standard speakers won't. The pre-wired 180 mm cable terminates in a 2-pin JST connector for easy hookup. Key Features 28mm Diamet...
Flexible Qwiic Cable - 500mm
This is a 500mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in tig...
Adafruit Proto Tripler PiCowbell for Pico and PicoW
·
The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It also includes LiPo battery charging, a power switch, reset button, STEMMA QT conne...
SIM7070G Global NB-IoT Communication Module with GNSS Positioning
·
The SIM7070G is a globally compatible NB-IoT communication module supporting CAT-M, NB-IoT, GSM, GPRS, and EDGE wireless protocols. It also features integrated GNSS satellite positioning with support for GPS, GLONASS, BeiDou, and Galileo — making it a versatile solution for IoT connectivity and a...
FLORA Budget Pack
·
Get started with the fabulous Adafruit Flora platform with this lovely budget kit, just enough to get you started with this fun wearable computer. Included are enough parts to make your first wearable electronic project. There's a Flora motherboard, four ultra-bright chainable RGB pixels, a 3x...
4-pin JST PH to JST SH Cable - STEMMA / Grove to QT / Qwiic - 200mm long
·
A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the two connector ecosystems. Both connectors have a latching feel for secure conn...
5-pin (Arduino MKR) to 4-pin JST SH STEMMA QT / Qwiic Cable - 100mm long
·
This 100mm adapter cable connects STEMMA QT / Qwiic sensors to Arduino MKR boards. It features a 4-pin JST SH (STEMMA QT / Qwiic) connector on one end and a 5-pin JST SH (Arduino MKR I2C) connector on the other, with the wiring crossed over for correct pin mapping between the two systems. Use th...
Extended GPIO Female Header - 2x20 Pin (13.5mm/9.80mm)
This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs that do not have headers on the board. This is assuming that the board is only pop...
Adafruit STEMMA Piezo Driver Amp - PAM8904
The Adafruit STEMMA Piezo Driver Amp uses the PAM8904 switched-capacitor driver to amplify signals for piezo elements at up to 300 kHz. With bridge-tied load (BTL) output and up to 3× voltage multiplication, it can deliver approximately 13 Vpp — much louder than driving a piezo directly from a 3V...
Extended GPIO Female Header - 2x20 Pin (16mm/7.30mm)
This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs that do not have headers on the board. This is assuming that the board is only pop...
JST-SH 2-Pin Right-Angle Connector - 1mm Pitch
·
This compact 2-position JST-SH connector is a surface-mount part for adding a small cable connection to your PCB.It uses a right-angle layout, helping route the mating cable parallel to the board where vertical clearance is limited. The 1mm pitch suits tight electronics builds and compact maker p...
JST-XH Extension Cable - 2.5mm Pitch - 500mm long
·
We now have a handy extension cord for JST-XH projects! One end has a JST-XH socket, and the other has a matching plug. Between the two, 500mm of color-coded wire. This solid 2.5mm pitch connector extension cable is great when you need something that can carry a couple amps of curr...
JST PH 4-Pin to Female Socket Cable - I2C STEMMA Cable - 200mm
·
This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" female sockets on the end. We're carrying these to match up with any of our boards with 'STEMMA' connectors on them such as the Hallowing or Trellis M4. Can also be used with any STEMMA bre...
JST RCY Connector - Male/Female Set (2-pin)
This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less. They are commonly found in RC vehicles. These come in a bag of 1 male plug, 1 female plug, plus pins to connect them both. The pins crimp to your cable and are inserted into the housing. 1 male so...
STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long
·
This 300 mm (11.8") 4-wire cable is fitted with JST-SH female 4-pin connectors on both ends. The 1 mm pitch JST-SH connectors are more compact than the chunkier 2 mm pitch JST-PH, while still providing a secure latching connection that is easy to insert and remove. Compatible with both STEMMA QT...
SparkFun Thing Plus - STM32
With a 32-bit ARM® Cortex®-M4 RISC core, the SparkFun STM32 Thing Plus brings power and precision to your projects. The STM32 Thing Plus provides you with an economical and easy to use development platform if you're needing more power with a minimal working space. This Thing comes flashed with t...
2 x AAA Battery Holder with switch
A compact 2×AAA battery holder with a built-in power switch and JST connector, compatible with micro:bit and other boards that accept JST battery inputs. This is the same battery holder included in our micro:bit accessories kit. Key Features Power Switch – On/off switch for convenient power co...
Breadboard to JST-ZHR Cable - 4-Pin 1.5mm Pitch
·
This cable adapts a 4-pin JST-ZHR connector to breadboard-compatible male pins, making it easier to prototype with devices that use the common friction-fit ZHR-style JST connection.It is a handy option for connecting compatible sensors, radios and other small electronics modules to a solderless b...
