All Products
Showing 21-40 of 57 products · 3 unavailable products hidden
Gravity: Arduino CO/Combustible Gas Sensor (MQ9)
The Gravity MQ-9 gas sensor detects carbon monoxide (CO) and combustible gases including methane and propane. It uses a semiconductor SnO2 sensing element that cycles between high and low temperatures — detecting CO at low temperature (1.5V) and combustible gases at high temperature (5.0V). With...
Gravity: Digital Adjustable Infrared Proximity Sensor for Arduino (0~200 cm)
A digital infrared proximity sensor with adjustable detection range from 0 to 200 cm. Outputs a simple digital signal — HIGH when an obstacle is detected, LOW when clear. The detection threshold is adjustable via a rear-mounted screw, making it easy to tune for different applications. Features t...
Gravity: STCC4 True Carbon Dioxide (CO2) Sensor (3-in-1 Air Quality Monitoring, 400 ~ 5000ppm)
·
This Gravity air quality module uses Sensirion’s STCC4 gas sensing chip to directly measure carbon dioxide with the thermal conductivity measurement principle. It is designed for compact, cost-effective indoor monitoring nodes where stable CO₂ readings are needed without complex hardware integrat...
Gravity: I2C 16x2 Arduino LCD with RGB Backlight Display
A 16×2 character LCD module with full RGB backlight, communicating over I2C for minimal wiring. With support for 16 million backlight colours, this display adds a vibrant, customisable readout to your Arduino or compatible microcontroller projects using just four wires: VCC, GND, SDA, and SCL. P...
Gravity: SO2 Sensor (Calibrated) - I2C & UART
A factory-calibrated electrochemical sulfur dioxide (SO2) sensor with I2C, UART, and analogue output modes. Part of the DFRobot Gravity gas sensor series, this module quickly and accurately measures SO2 concentration for industrial monitoring and environmental protection applications. The electr...
Gravity: Linear / Analog Hall Effect Sensor with ±1200 GS Magnetic Field Range
·
##Introduction Gravity: Linear/Analog Hall Sensor is a high-precision device designed for measuring and monitoring magnetic field strength. Advanced Hall effect circuitry at the core converts magnetic induction strength directly into a voltage output. The sensor responds uniquely to magnetic fiel...
Gravity: Starter Kit for Arduino
The Gravity Starter Kit for Arduino is a plug-and-play electronics toolkit designed for beginners and makers getting started with the Arduino platform. It includes a DFRduino UNO R3 microcontroller (fully compatible with Arduino UNO) along with 12 popular sensors and components from DFRobot's Gra...
Gravity SFA40 Formaldehyde (HCHO) Sensor
·
This Gravity-series module is a high-precision electrochemical sensor for monitoring formaldehyde (HCHO) in indoor air. It is built around Sensirion’s SFA40 sensing chip and is designed to selectively detect HCHO while reducing false readings from common household vapours such as alcohol or perfu...
Gravity HF Gas Sensor (Calibrated) - I2C/UART/Analogue
·
Measure hydrogen fluoride concentration with a factory-calibrated electrochemical probe that supports analogue, I2C and UART output modes. It is designed for quickly building an HF concentration detector for industrial and environmental protection applications.The sensor includes integrated tempe...
Arduino Portenta C33 Development Board
·
##Introduction The Arduino Portenta C33 is a streamlined module that offers the high performance of the Arduino Portenta family at a lower price point, thanks to optimizations and streamlined features. Ideal to developing cost-effective, real-time applications, the Portenta C33 features the ARM® ...
DFRobot Gravity 10DOF IMU AHRS (BNO055 + BMP280)
·
This compact Gravity module combines a Bosch BNO055 absolute orientation sensor with a BMP280 barometric pressure and temperature sensor to create a 10DOF AHRS module for motion, heading and environmental sensing.The BNO055 integrates a triaxial 14-bit accelerometer, triaxial 16-bit gyroscope, tr...
Gravity: Digital 1-to-8 I2C Multiplexer
The Gravity I2C Multiplexer solves address conflicts when you need to connect multiple I²C devices that share the same fixed address. It provides eight independent I²C ports on a single bus, allowing up to eight identical-address sensors or modules to communicate without conflict. The default I²...
Gravity: Arduino DHT11 Temperature Humidity Sensor
This Gravity-compatible DHT11 sensor provides calibrated digital temperature and humidity readings via a single data pin. With an integrated 8-bit microcontroller and factory-calibrated coefficients stored in OTP memory, it delivers reliable measurements with minimal setup. The Gravity 3-pin int...
Gravity: 4-Digital LED Segment Display Module (Green)
The Gravity 4-Digital LED Segment Display Module features a bright green 7-segment display with four digits, perfect for showing numbers, time, sensor readings, and other data in your projects. It communicates over I2C for simple two-wire connectivity with Arduino, Raspberry Pi, and other microco...
Gravity: Analog SHT30 Temperature Humidity Sensor
Gravity: Analog SHT30 Temperature & Humidity Sensor adopts the new generation SHT30 temperature and humidity sensor from Sensirion. Thanks to Sensirion's CMOSens® technology, highly integrated capacitive humidity sensing components and band-gap temperature sensing components, the SHT30 offers hig...
High Temp Waterproof DS18B20 Digital Temperature Sensor - 3m long
·
This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive than the other waterproof version we have with a PVC cable because this one can be...
Gravity 3-Pin PH2.0 to DuPont Male Cable Pack 30cm
·
This pack includes ten 30 cm Gravity analogue sensor cables, each with a 3-pin PH2.0 plug on one end and DuPont male connectors on the other.The cables are compatible with breadboard and DuPont wire spacing, making them handy for connecting DFRobot analogue sensors to an IO Expansion Shield or IO...
Gravity Calibrated NH3 Ammonia Sensor - I2C/UART
·
This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontroller and single-board computer projects.The probe is factory-calibrated for quick s...
Hackster and DFRobot IoT Starter EEDU Kit (ESP32)
An all-in-one IoT starter kit built around the FireBeetle 2 ESP32-E, designed by Hackster and DFRobot for learning IoT development with Arduino. The kit includes sensors, actuators, an audio player with speaker, and an I/O shield — everything needed to build connected projects right out of the bo...
Gravity: I/O Expansion Shield for Pyboard
The Gravity I/O Expansion Shield for Pyboard connects your Pyboard v1.1 to the DFRobot Gravity sensor and module ecosystem with colour-coded plug-and-play connectors. No soldering is required — simply plug Gravity-compatible sensors and modules into the clearly labelled ports. An onboard externa...
