All Products
AI Overview
Copper tape is commonly used for low-profile conductive traces, RF/EMI shielding, and antenna making—the main choice point is width/length and whether you need conductive adhesive (for reliable electrical continuity across overlaps).
Popular copper tape options (electronics/crafting)
- Copper Tape ($7.05) — general-purpose copper tape for traces/shielding.
- Adhesive Copper Tape 5mm x 10m ($8.90) — 5mm width, 10m length, solderable adhesive-backed copper tape.
- 20mm Copper Tape ($8.20) — 20mm wide, 20m roll with double-sided conductive adhesive (great for wider shielding/grounding runs).
Conductive-adhesive copper tape (best for shielding & overlapping seams)
- Copper Tape - Conductive Adhesive, 5mm (60ft) 20m ($5.40) — 5mm, 20m, conductive adhesive for continuity through overlaps.
- Copper Tape - Conductive Adhesive, 5mm (100ft) ($5.05) — extra-long roll for lots of runs.
- Copper Tape - Conductive Adhesive, 5mm (50ft) ($12.75) — 5mm, 50ft.
- Copper Tape - Conductive Adhesive, 2 (50ft) ($64.85) — 2\" (50.8mm) wide for covering larger areas.
Copper foil tape (conductive adhesive)
- Copper Foil Tape with Conductive Adhesive - 6mm x 5 meters long ($11.25) — 6mm wide, flexible/solderable foil tape.
- Copper Foil Tape with Conductive Adhesive - 6mm x 15 meter roll ($12.85) — same 6mm width, longer roll.
- Copper Foil Tape with Conductive Adhesive - 25mm x 15 meter roll ($47.60) — 25mm wide for broader shielding coverage.
Non-conductive-adhesive copper tape (for traces where you’ll solder/join mechanically)
- Copper Tape - 5mm (50ft) ($10.90) — 5mm wide.
- Copper Tape - 2 (50ft) ($69.55) — 2\" wide.
Showing 21-40 of 40 products · 35 unavailable products hidden
Chibi Clip
An essential companion to the Chibi Chip, the Clip enables rapid testing and re-use of the Chip. With the Clip, attaching (and detaching) your Chip to circuits built on paper is as easy as using a clothespin. The Clip was designed with classrooms and teachers on a tight budget in mind. Solderi...
ITO (Indium Tin Oxide) Coated PET Plastic - 100mm x 200mm
·
ITO is a clear, conductive liquid/film and here we have it as a coating on a flexible plastic (PET) sheet. This is a very interesting and fun material, also used in scientific research and LCD/OLED manufacture! One side of the plastic is coated in ITO, you can use the flat of a blade or similar t...
ITO (Indium Tin Oxide) Coated Glass - 50mm x 50mm
·
A 50 × 50 mm glass sheet coated on one side with Indium Tin Oxide (ITO) — a transparent, electrically conductive film. The same material is used in LCD/OLED manufacturing and scientific research. Experiment with creating conductive traces by scraping away the ITO coating, or explore transparent e...
Chibitronics Circuit Stickers Effects Add-On Pack
If you already have or are looking to own some Circuit Stickers from Chibitronics you may be looking to add a few effects to your LEDs. The LED Effects Add-On Pack provides you with four unique stickers to make your LEDs blink, twinkle, and generally effect the way you experience them. Each kit f...
Love to Code Chibi Clip Mounting Accessory
The Chibi Clip is a clothespin-style mounting accessory for the Chibi Chip microcontroller board. It uses spring tension to press the Chip's electrodes onto copper tape circuits built on paper, allowing quick attachment and detachment without soldering or adhesive. Designed with classrooms in mi...
ShakeUp Classroom STEM Pack
Due to popular demand we've created our ShakeUp Classroom pack!The ShakeUp makes you a STEAM inventor by helping you to connect everyday objects to your computer. If you can plug in a Keyboard and Mouse, you can use the ShakeUp. The Magic Science When you plug the ShakeUp into your computer...
micro:bit In Wonderland - Basic Companion Kit
The micro:bit in Wonderland - Basic Companion Kit was created to contain all of the necessary components needed to complete the projects in the micro:bit in Wonderland book. It's a project book where you read a chapter from Alice's Adventures in Wonderland and then complete a project linked...
JST Breakout for E-Textiles and Paper Circuits
This E-textiles board is a breakout for a JST, so you can sew it onto a garment or use it in Paper Circuits! The JST breakout board can be easily sewn through the large holes. For paper circuits, simply apply copper tape on top of it.A wearable lithium polymer battery or wearable lipo also kno...
Nylon Fabric Squares with Conductive Adhesive - 10cm x 10cm - 3 pack
·
With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft! These Conductive Nylon Squares go great with our other interesting materials, such as copper tape, ITO glass or plastic, conductive inks, etc. We found that the metallic nylon fa...
Super Dinky Blinky
Connect some LEDs (and a battery) up to this little square board and watch them blink! SDB also functions as a handy power switch for papercrafts, cards and wearables. Super Dinky Blinky has terminals designed to accommodate a wide variety of connections - copper tape, crocodile clips (alligator ...
Circuit Playground Express Educator's Pack
·
The Circuit Playground Express Educator's Pack is a comprehensive classroom kit built around Adafruit's versatile Circuit Playground Express board. It includes everything educators need to teach electronics, coding, and wearable technology — from conductive thread and servos to battery packs and ...
E-Textiles Class Kit
·
This kit is designed for use with the electronic textiles unit in the Exploring Computer Science (ECS, exploringcs.org) introductory computing curriculum for secondary students. It contains most of the materials needed for four e-textiles projects: paper circuit, wristband, mural, and hum...
Conductive Material Pack
Start your creative DIY project with this high-quality wire pack! The pack contains several kinds of conductive materials that basically meet your common needs of wiring. It includes conductive cloth tape with excellent flexibility, double-conductor copper foil tape, temperature-resistant aluminu...
Aluminum Case for Raspberry Pi 5 Single Board Computer
An aluminium alloy enclosure for the Raspberry Pi 5, featuring a comprehensive cooling system with copper heatsinks, an adjustable-speed fan, and an acrylic top cover with ventilation holes. The fan automatically adjusts its speed based on temperature, keeping the Pi 5 cool and stable during dema...
16-pin Dual Contact 0.5mm Pitch FPC ZIF Connector
·
This compact connector is a 16-pin, surface-mount ZIF FPC connector with a 0.5mm pitch, suited to connecting compatible flat flexible cables to your PCB.It uses a right-angle layout with contacts on both the top and bottom, helping support dual-contact cable arrangements in tight designs. The fli...
Copper Foil Sheet with Conductive Adhesive - 12 x12 Sheet
·
Copper sheet can be an interesting addition to your toolbox. The sheet itself is made of thin pure copper so its extremely flexible and can take on nearly any shape. You can easily solder to it, and the material itself can carry current just like a wire. On the back is an electrically conducti...
Mini Touch Kit
This is a cool touch sensor from DFRobot. You can hook it up to the IO Expansion shield (for arduino) directly. It includes a metallic tape with a sticky side. This make it possible for you to place your sensors anywhere you want. So, if you get sick of the typical push buttons, try this in...
Ultra Skinny NeoPixel 1515 LED Strip 4mm wide - 0.5 meter long - 75 LEDs
·
We have all sorts of LED strips for a wide range of needs. Chonky strips? We got those! Strips with alligator clips that are easy-peasy to MakeCode? Oh definitely. Weatherproof? We have a gamut of options.Now we have some Honey I Shrunk the LED Strips in the store. At an astonishing 4mm width the...
ICE-Tower Cooling Fan for Raspberry Pi
A tower-style CPU cooler for the Raspberry Pi, combining a 5mm copper heatpipe, multi-layer aluminium heat sinks, and a 7-blade fan to significantly reduce operating temperatures. Under overclocking conditions, it can bring the Pi's temperature down from around 80°C to approximately 40°C. Compat...
CR123A Li-ion Battery Holder for micro: Maqueen
This compact rechargeable power module is designed for micro:bit-based Maqueen educational robots. It holds a single CR123A 3.6V lithium rechargeable battery and provides a tidy power solution for classroom robotics, STEM workshops and small mobile robot projects.A built-in lithium battery chargi...
