All Products
Showing 21-40 of 50 products · 10 unavailable products hidden
2.42inch OLED Display Module, 128×64 Resolution, SPI / I2C Communication
A 2.42″ monochrome OLED display module from Waveshare with 128 × 64 resolution, driven by the SSD1309 controller. It supports both 4-wire SPI and I2C interfaces with an onboard voltage translator, and Waveshare provides example code for Raspberry Pi, Pico, Arduino, STM32, ESP32, and Jetson Nano. ...
Bluno Mega 2560 - An Arduino Mega 2560 with Bluetooth 4.0
The Bluno Mega 2560 combines the ATmega2560 microcontroller with an integrated TI CC2540 Bluetooth 4.0 (BLE) module, bringing wireless communication to the Arduino Mega form factor. It supports wireless programming over BLE, Bluetooth HID, iBeacon, and serial pass-through — while remaining fully ...
SIM868 GSM GPRS GNSS Bluetooth 3.0 HAT for Raspberry
Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero WSupports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioningBluetooth 3.0, supports data transferring through BluetoothOnboard USB TO UART...
ART-Pi STM32H750 Cortex-M7 Development Board
The ART-Pi from RT-Thread Team is a DIY open source hardware with extended functions specially designed for embedded software engineers and open source makers. The equipped high-performance MCU, practical peripherals and rich extension ports make it an excellent choice for most engineers to study...
MicroMod STM32F405 Processor Board
·
This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...
XBoard V2 -A Bridge Between Home And Internet (Arduino Compatible)
This is Version 2.0 of the Xboard. The main improvement is that it now operates at 5V, making it compatible with most sensors and I2C protocol without the need of a voltage level converter. The XBoard is a unique Arduino board which features a WIZnet ethernet port, an XBee socket, and...
Industrial 8-Channel ESP32-S3 WiFi Relay Module (With POE)
·
Built around the ESP32-S3 dual-core processor, this industrial relay module brings local control, networking and edge automation into one DIN-rail friendly unit. It combines 8 relay outputs, 8 digital inputs, isolated CAN, Ethernet, Wi-Fi and Bluetooth for control panels, robotics, smart factorie...
STM32F411 "BlackPill" Development Board
This compact STM32F411 development board can be well embedded in your projects. Featuring the STM32F411CEU6, this chip has 512KB of ROM, 128KB of SRAM and runs at 100MHz. There is a spot on the bottom for SOIC flash memory, which allows you to solder SPI flash memory to give yourself more spac...
Gravity: Analog Waterproof Capacitive Soil Moisture Sensor
The Gravity Analogue Waterproof Capacitive Soil Moisture Sensor from DFRobot measures soil moisture using capacitive sensing rather than resistive probes, offering significantly better corrosion resistance and longer lifespan. The sensor is fully waterproof and can operate even when completely su...
1.47inch LCD Display Module, Rounded Corners, 172x320 Resolution, SPI Interface
A sleek 1.47-inch IPS LCD display module with rounded corners, 172×320 resolution, and 262K RGB colours. The ST7789V3 driver communicates via a 4-wire SPI bus, minimising IO pin usage while delivering clear, colourful visuals. Supports both 3.3 V and 5 V operating voltage and comes with example ...
Round 0.71" LCD Display Module - 160x160, SPI, 65K Colors
·
This 0.71″ round LCD module packs a 160 × 160 pixel IPS display with 65K colours into a tiny 20 × 22 mm footprint. Driven by the GC9D01 controller over a 4-wire SPI interface, it's easy to integrate with Raspberry Pi Pico, ESP32, Arduino, and other microcontrollers using minimal IO pins. The rou...
Bluno Beetle Shield
INTRODUCTION The Bluno Beetle Shield expands the Beetle's single analog and digital I/O pins to the 3 pin "gravity" interface, giving more power and ground connections and making it easier to attach gravity interface modules. It also includes a convenient external power supply and a 5-8v swi...
STM32F411 BlackPill Development Board
·
This simple development board for the STM32F411 is a great way to add a powerful STM chip to your next project. Featuring the STM32F411CEU6, this chip has 512 KB of flash, 128 KB of SRAM and runs at 100 MHz. There's a spot on the bottom for SOIC flash memory - you could solder on a 2 MB SPI flash...
Gravity: GP8501 2-Channel PWM to 0-2.5V/VCC DAC Module
·
##Introduction This is a 2-channel analog voltage output DAC module with PWM communication, 8-bit resolution, and 0.5% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32, Raspberry Pi, STM32, and other microcontrollers that require analog signal outpu...
SparkFun MicroMod STM32 Processor
The SparkFun MicroMod STM32 Processor Board brings the power of the STM32F405 ARM Cortex-M4 microcontroller to the MicroMod ecosystem. Operating at up to 168 MHz with a hardware floating point unit (FPU) and full DSP instruction set, this processor board delivers serious performance in a compact ...
Espressif ESP32 Development Board - Developer Edition
·
The Espressif ESP32 Development Board breaks out all ESP32 module pins to standard 2.54 mm (0.1 in) headers, with a CP2102 USB-to-serial adapter for programming, boot and reset buttons, and an onboard 3.3 V regulator. It supports development via the Arduino IDE, ESP-IDF (Espressif's official tool...
Arduino Nano ESP32 with headers
The Arduino Nano ESP32 brings the ESP32-S3 (u-blox NORA-W106 module) into the familiar Nano form factor with a USB-C connector. It supports both Arduino and MicroPython programming, making it an accessible entry point for IoT, Wi-Fi, and Bluetooth projects with the full backing of the Arduino eco...
Adafruit Sparkle Motion Stick + Enclosure Kit
·
The Adafruit Sparkle Motion Stick is a compact USB-A dongle version of the Sparkle Motion smart LED driver, designed for WLED projects that need a small, portable form factor. This kit includes both the Sparkle Motion Stick and a snap-on enclosure with a button lever and USB port cap. Powered vi...
SparkFun Thing Plus - ESP32-C6
·
The SparkFun ESP32-C6 Thing Plus is a compact, user-friendly device packed with advanced technology, designed to enhance your wireless projects like never before. It features the Espressif™ ESP32-C6 WROOM-1-N16 module at its core, which includes a RISC-V single-core processor, ample flash memory...
Arduino Portenta H7 Lite Development Board
The Arduino Portenta H7 Lite is a high-performance dual-core development board and the cost-optimised entry point in the Portenta H7 series. It uses the same STM32H747XI MCU as the full Portenta H7, featuring a Cortex-M7 core (up to 480MHz) and a Cortex-M4 core for parallel multi-threaded process...
