All Products
Showing 21-40 of 43 products · 25 unavailable products hidden
Pimoroni HyperPixel - 4.0" Hi-Res Display for Raspberry Pi
·
Pimoroni's HyperPixel features a 4.0" display with 800x480 18-bit color pixels and a capacitive touch overlay, making it more sensitive and responsive than a resistive touch display. The plate uses the high speed DPI interface on the Pi and can use the mini display as a console, X window port, di...
Adafruit Half-size Perma-Proto Raspberry Pi Breadboard PCB Kit
·
The Adafruit Half-size Perma-Proto Raspberry Pi Breadboard PCB Kit combines a prototyping board with a built-in Pi Cobbler breakout. Solder the included 2×13 box header onto the board, connect a 26-pin GPIO ribbon cable (not included), and you get labelled GPIO breakouts alongside a generous half...
Adafruit 16-Channel PWM / Servo Bonnet for Raspberry Pi
·
The Adafruit 16-Channel PWM/Servo Bonnet adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution — completely free-running with no Pi processing overhead. Up to 62 bonnets can ...
Raspberry Pi e-ink Display Module
This Raspberry Pi e-ink display module comes with a 2.13” screen with a resolution of 250×122, adopting SPI interface to communicate with Raspberry Pi. It leads out the pins on Raspberry Pi, so there would be no conflicts if you need to use the e-ink display and Raspberry Pi’s pins at the same...
40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6 long
·
A 150mm (6″) GPIO extension cable for Raspberry Pi models with a 2×20 pin header. Extends all 40 GPIO pins between your Pi and a HAT, Bonnet, pHAT, or other accessory, allowing you to mount add-ons away from the board. Plug the socket end onto the Raspberry Pi's GPIO header (white mark aligned w...
Wide Band 4G LTE Internal LoRa Antenna
A compact wide-band internal antenna covering 700–2700 MHz, suitable for 4G LTE, LoRa, BLE, and other RF applications. The FPC radiator element connects via a 100mm coaxial cable with an IPEX (u.FL equivalent) connector, and 3M adhesive backing makes it easy to mount inside enclosures and project...
Miniware TS1C Cordless Smart Soldering Station
·
This cordless smart soldering setup uses a super-capacitor inside the soldering handle, giving you cable-free movement at the bench without relying on a conventional battery pack. The OLED display lets you keep an eye on power and temperature status while you work.The soldering handle and control...
2.13in 250x122 Quad-Colour ePaper Display with SRAM
·
This compact ePaper module is designed for adding a small, paper-like display to your electronics project. It features a 2.13-inch quad-colour panel with a 250 x 122 pixel resolution and on-board SRAM.2.13-inch eInk/ePaper display250 x 122 pixel resolutionQuad-colour panelIncludes SRAMIt’s a prac...
Raspberry Pi - GPIO Shrouded Header (2x13)
This 2x13 shrouded header has the same number and spacing of pins as the Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 26 0.1"-spaced pins and is keyed for polarity. Check the related items below for the mating...
IDC Breakout Helper - 2x13 (26 pin)
·
The "poor woman's" Raspberry Pi cobbler! This combo of 2x13 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A and B. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard o...
GPIO Header for Raspberry Pi - Extra tall 2x13 Female Header
·
Connect your own PCB to a Raspberry Pi with this extra-tall female header. The female header part has extra spaces to make it 13.6mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. This header has 3mm of pins, compared with our stacking version which is the same base...
Stacking Header for Raspberry Pi - 2x13 Extra Tall
·
Stack multiple plates, breakouts etc onto your Raspberry Pi with this custom-made extra-tall and extra-long 2x13 female header. The female header part has extra spaces to make it 13.6mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. The stacky pin part is also extra...
Adafruit 2.13 250x122 Tri-Color eInk / ePaper Display with SRAM - SSD1680 Driver
·
The Adafruit 2.13" Tri-Colour eInk Display brings electronic paper technology to your microcontroller projects. Featuring a 250×122 pixel display with black, red, and white ink, this breakout delivers high-contrast, daylight-readable visuals that persist even when power is completely disconnected...
A111 60GHz Pulsed Radar Breakout
·
Bring 60GHz radar sensing into your project with the Acconeer A111 single-chip pulsed coherent radar sensor on a SparkFun breakout board. It is suited to high-precision distance measurement, and also supports gesture, motion, material and speed-detection applications at distances up to two metres...
Resettable Fuse PTC
This is a handy little device that can save your system from smoking. A resettable fuse (also known as a PTC) is a resistor that has very unique properties. For this model, if your circuit tries to draw more than 250mA of current (if you have a bad short for instance) the PTC would ‘trip’ (...
Pi-EzConnect Terminal Block Breakout HAT
·
With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderless or soldered connections for all GPIO’s on a Raspberry Pi Mini proto area for...
IDC Breakout Helper - 2x20 (40 pin)
·
The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2 (40 pins). It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the c...
IDC Breakout Helper - 2x8 (16 pin)
·
This 2x8 (16 pin - 0.1" spaced) IDC Breadboard Helper is great in conjunction with any 16-pin IDC cables. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header p...
IDC Breakout Helper - 2x3 (6 pin)
·
This little 2x3 (6 pin - 0.1 spaced) IDC Breadboard Helper is great in conjunction with our 6-pin IDC cable. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header p...
GPIO Ribbon Cable for Raspberry Pi Model A and B - 26 pin
·
That new Raspberry Pi® Model A or B computer you just got has a row of 2x13 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or l...
