All Products
Showing 81-100 of 100 products
Building Block Expansion Board for micro:bit & UNIHIKER K10
·
This expansion board turns a micro:bit or UNIHIKER K10 into a cable-free robotics controller for mobile builds. It provides onboard power from a user-replaceable 18650 cell slot and breaks out motor, servo, Gravity IO and I2C connections for adding sensors, displays, AI cameras and actuators.The ...
DFRobot Building Block Expansion Board Bundle for UNIHIKER M10
·
This bundle adds motor, servo and sensor expansion to the UNIHIKER M10 single-board computer, using the included Type-C to HY2.0-4P communication cable to bridge the M10 to the expansion board.The board includes an integrated 18650 battery holder so your controller, motors and sensors can run fro...
USB Host FeatherWing with MAX3421E
·
Add USB host capability to a Feather-based project, so your microcontroller can talk to devices like keyboards, mice and USB mass storage drives. This board is built around the MAX3421E, a well-proven USB host controller that communicates with the main Feather over SPI plus an IRQ pin.It is a han...
Arduino Motor Shield R3
INTRODUCTION The Arduino Motor Shield is based on L298 (a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors). It helps you drive two DC motors with Arduino board as well as control the speed and direction of the ...
ShiftBar
The ShiftBar is a medium-power RGB LED controller featuring 10-bit digital brightness control on each color channel (over one billion colors). Multiple ShiftBar modules can be chained together and controlled from a single microcontroller to create large LED displays.
Romeo V2- Arduino Robot Board (Arduino Leonardo) with Motor Driver
RoMeo V2 [R3] is an All-in-One Arduino based robot board, it is especially designed for robotics applications, and extended devices. Romeo benefits from the Arduino open source platform, it is supported by thousands of open source projects, and can easily be expanded with Arduino Shields. The ...
3-wire Serial LCD Module (Arduino Compatible)
A 128 × 64 pixel graphic LCD module based on the ST7920 controller, featuring a blue backlight with white characters. Supports both parallel (8/4-bit) and SPI (3-wire serial) interfaces, with parallel mode set as the default. To switch to SPI mode, move the R9 resistor to the R10 position. The d...
Sabertooth dual 12A motor driver
This is the new version of the Sabertooth 2x10 motor controller. The Sabertooth 2X12 is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for medium powered robots - up to 30lbs in combat or 100lbs for general purpose robotics. Out of the box, ...
64x32 RGB LED Matrix - 3mm pitch
·
The 64×32 RGB LED Matrix Panel with 3mm pitch features 2048 bright RGB LEDs in a 192×96mm panel. With tighter pixel spacing than 4mm and 5mm variants, this panel delivers sharp images for indoor viewing at moderate distances. The panel features two IDC connectors on the back (input and output) f...
Servo Tester and Speed Controler Power
The servo tester and controller can be used as a signal generator for electronic speed controllers. If you are looking for a low-cost way to get a servo up and running without any programming, you can plug directly into the servo tester. There are 3 modes that can be use:...
Automation HAT
The Automation HAT is a versatile home monitoring and automation controller for Raspberry Pi. With relays, analog channels, powered outputs, and buffered inputs — all 24V tolerant — you can connect a wide range of sensors, motors, and actuators to a single board. Each channel has indicator LEDs ...
Button SHIM
Button SHIM gives you five handy, physical buttons and an RGB status LED, and it's HAT and pHAT-compatible! Our SHIM-format boards are designed to slip neatly onto your Pi's GPIO pins and still allow you to use HATs and pHATs at the same time. Or solder the included female header onto Button S...
Cluster HAT v2.0
The Cluster HAT interfaces a (Controller) Raspberry Pi A+/B+/2/3 with 4 Raspberry Pi Zeros (NOT included). Configured to use USB Gadget mode, it is an ideal tool for teaching, testing or simulating small scale clusters. USB Gadget Mode: Ethernet and Serial Console. Onboard 4 port USB 2.0 hub. Zer...
Mote - Stick - Full RGB
A 16-pixel APA102 RGB LED strip designed for use with the Pimoroni Mote USB controller. Each stick is 18 cm long with individually addressable full-colour LEDs, providing smooth, flicker-free lighting for mood lighting, under-shelf illumination, and creative projects. The Mote stick connects to ...
micro:Gamepad
A gamepad expansion board for the BBC micro:bit. Plug in your micro:bit and it becomes a wireless remote controller or game console. The gamepad features eight programmable buttons (D-pad: up, down, left, right; face buttons: X, Y; front buttons: A, B), plus an onboard vibration motor, buzzer, an...
Bluetooth Joystick/gamepad
This compact Bluetooth controller lets you play iCade games on iOS and Android devices. It can also control music wirelessly, act as a wireless mouse on a PC or Mac, and remotely trigger your smartphone camera.The package includes one Bluetooth joystick. It uses two AAA batteries, which are not i...
3.2 TFT Display with Resistive Touchscreen
·
A 3.2" TFT LCD display module with a built-in resistive touchscreen. The 320×240 pixel screen is driven by the ILI9341 chipset and supports SPI, 8-bit parallel, and 16-bit parallel interfaces. This is the bare display module only — no PCB or breakout board is included. A 50-pin, 0.5 mm pitch, to...
PLC Proto Industrial Board Module
The PLC Proto Industrial Board is a base module designed for industrial applications in the M5Stack ecosystem. It accepts 9–24 V DC power input and includes a protoboard area for custom circuit layouts, plus an RS485 adapter board with an integrated ACS712 current sensor for monitoring. Housed i...
RetroFlag SUPERPi Case (Deluxe Edition-J)
The wait is over! The SUPERPi case is here!We created this Pi case applying the most iconic element in the retro game world as a homage to the most classic console ever made.Behind the side LAN/USB cover, there is access to two USB ports and one standard RJ-45 connector.The functional EJECT butto...
CAN-BUS Shield
CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. This CAN-BUS Shield adopts MCP2515 CAN Bus controller with SPI interface and MCP2551 CAN tr...
