All Products
AI Overview
For a typical 38 kHz IR remote, try the IR Receiver Diode - TSOP38238 ($4.55), an IR Receiver Module for Arduino ($4.15), or the Adafruit Infrared IR Remote Receiver - STEMMA JST PH 2mm ($8.80) if you prefer a STEMMA connector. To capture codes across 20–60 kHz, use the Adafruit TSMP96000 Code Learning Infrared IR Receiver Breakout ($11.85). For a 56 kHz signal, choose the Vishay TSOP34156 IR Receiver Module ($4.25). The IR Remote Control Kit For Arduino ($2.55) includes both a remote and a 38 kHz receiver.
What will the IR receiver be used for?
Showing 81-100 of 100 products
VCNL4030 Proximity and Lux Sensor Breakout - STEMMA QT/Qwiic
·
This compact breakout combines a Vishay VCNL4030 proximity sensor and ambient light sensor on one board. It can measure proximity from 0 to 300mm (about 12 inches) and light from 0.004 to 16,768 lux, making it a handy option for touchless controls, presence detection and light-aware projects.The ...
Yahboom Roboduino Uno R3 smart robot compatible with Arduino
The Yahboom Roboduino is a smart robot car kit built around a custom driver expansion board compatible with Arduino Uno R3. Packed with sensors and modules — including ultrasonic ranging, line tracking, IR control, and a Wi-Fi camera — it provides a hands-on introduction to electronics, programmi...
Raspberry Pi Global Shutter Camera
The Raspberry Pi Global Shutter Camera is a specialised 1.6-megapixel camera that is able to capture rapid motion without introducing artefacts typical of rolling shutter cameras. It is ideally suited to fast motion photography and to machine vision applications, where even small amounts of d...
Pi-DAC+
The IQaudIO Pi-DAC+ audio card for the Raspberry Pi delivers outstanding sonic performance and full-HDaudio capability with build-in hardware volume control. The Pi-DAC+ also includes a high quality audiophile headphone amp. The Pi-DAC+ is a fully compliant Raspberry Pi HAT (A+/B+/2) boar...
Raspberry Pi 5 Media Center Kit Kit
Your living room media streaming hub Build a dedicated 4K media center with Kodi, LibreELEC, or Plex. The FLIRC case includes a built-in IR receiver so you can control everything with a standard remote. Raspberry Pi 5 — Choose your RAM (8GB or 16GB) Official 27W USB-C Power Supply — Clean, r...
Sphero RVR+ Programmable Robot
RVR+ is Sphero’s revolutionary take on the programmable robot and is optimised for high school classrooms and makerspaces. It’s drivable right out of the box, packed with a diverse suite of sensors, and built for customisation. RVR+ is expandable and made for novice to advanced programmers. Stud...
Motor shield for Raspberry Pi
A Raspberry Pi motor controller HAT built around the L293D dual H-bridge driver IC, designed to make building a Raspberry Pi robot easy and fun. Control up to 4 DC motors or 2 stepper motors at up to 600 mA (1 A peak) per channel. The board includes breakout connectors for IR line sensors and an...
BH1745 Luminance and Colour Sensor Breakout
A really sophisticated and accurate colour and luminance sensor breakout that's Raspberry Pi and Arduino compatible. As well as detecting RGB colour and light level, it has added bells and whistles like 50/60Hz light noise rejection, a wide detection range, and two illumination LEDs. T...
micro:Maqueen Lite - micro:bit Educational Robot Platform
·
Maqueen Lite is a compact, pre-assembled robot for the BBC micro:bit, and the friendliest way into classroom robotics. Slot a micro:bit into the edge connector, write a few blocks in MakeCode, and it drives, follows a line, flashes its headlights and beeps. No soldering and no chassis to build. ...
micro:Maqueen Plus V2 (Ni-MH) with micro:Maqueen Mechanic
This educational robot kit combines the micro:Maqueen Plus V2 AA vehicle body with the micro:Maqueen Mechanic set for building forklift, push, beetle and loader-style mechanisms. It is designed for micro:bit-based STEM and STEAM learning, classroom activities, after-school extension work and robo...
Gravity: IIC to Dual UART Module
The Gravity IIC to Dual UART Module converts a single I2C connection into two independent hardware serial ports. Each sub-UART has its own 256-byte FIFO buffer for transmitting and receiving, with individually configurable baud rate, word length, and parity settings. Most controller boards like ...
Bipolar Transistor Kit - 5 x PN2222 NPN and 5 x PN2907 PNP
·
Transistors are powerful little electronic switches, and we really like these NPN and PNP transistors whenever we need to control medium-power electronics, such as small motors, solenoids, or IR LEDs. We find them so handy we threw together a mix-and-match bag of PN2222 and PN2907! You get 5...
Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor
·
The Adafruit APDS9960 is a multi-function sensor that combines proximity detection, ambient light sensing, RGB colour sensing and gesture recognition in a single I2C breakout. It uses an integrated IR LED and four directional photodiodes to detect reflected IR energy, enabling both distance measu...
Circuit Playground Express Educator's Pack
·
The Circuit Playground Express Educator's Pack is a comprehensive classroom kit built around Adafruit's versatile Circuit Playground Express board. It includes everything educators need to teach electronics, coding, and wearable technology — from conductive thread and servos to battery packs and ...
Adafruit MetroX Classic Kit - Experimentation Kit for Metro
·
The Adafruit MetroX Classic Kit is a comprehensive experimentation kit with over 20 guided circuits and projects to explore microcontroller basics. Built around the Adafruit Metro 328 (Arduino UNO-compatible), this kit covers LEDs, transistors, motors, integrated circuits, pushbuttons, sensors, r...
Gravity: Arduino Analog Flame Sensor
This Gravity analog flame sensor detects fire and infrared light sources in the 760–1,100 nm wavelength range. With a 60° detection angle and analogue output proportional to flame distance, it's widely used in firefighting robots, fire alarm projects, and other safety applications. The Gravity i...
SparkFun Line Sensor Breakout - QRE1113 (Analog)
This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to the sensor. This tiny board is perfect for line sensing applications and can be used in both 3.3V and 5V systems. The board’s QRE1113 IR refle...
SparkFun Line Sensor Breakout - QRE1113 (Digital)
The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF capacitor discharges, the more reflective the surface. This makes it straightforwa...
ESP32(ESP-WROOM-32) WiFi Bluetooth Dual-Core MCU Module
INTRODUCTION The ESP32 WiFi and Bluetooth chip is the latest generation of Espressif products. It has a dual-core 32-bit MCU, which integrates WiFi HT40 and Bluetooth/BLE 4.2 technology inside. Compared to the arduino ESP8266 (the previous generation), the ESP32 has a significant ...
TCS34725 RGB Color Sensor For Arduino
The TCS34725 is an I2C RGB colour sensor that detects the red, green, and blue components of light in its environment and returns digital colour values. With high sensitivity, a wide dynamic range, and a built-in IR blocking filter, it delivers accurate colour readings under varied lighting condi...
