All Products
Showing 1-6 of 6 products · 6 unavailable products hidden
Expansion Shield X300 for Raspberry Pi B+/2B/3B
The X300 Expansion Shield is a feature-rich add-on board for the Raspberry Pi B+, 2B, and 3B. It integrates a wide range of connectivity and multimedia functions including SATA, WiFi, Bluetooth, a real-time clock, audio I/O, and a powered USB hub — all in a board that sits directly on top of the ...
Adafruit Infrared IR Remote Transceiver - STEMMA JST PH 2mm
·
The Adafruit Infrared IR Remote Transceiver combines a high-powered IR transmitter and a sensitive 38 kHz IR receiver on a single board. With two 940 nm IR LEDs (one vertical, one horizontal) driven by an onboard N-channel FET at 100–200 mA per LED, you get 10+ metres of transmit range alongside ...
Adafruit TSMP96000 "Code Learning" Infrared IR Receiver Breakout
·
The Adafruit TSMP96000 "Code Learning" Infrared IR Receiver Breakout detects IR signals across a wide frequency range of 20–60 KHz, making it perfect for "code learning" applications where you need your device to work with any IR remote control — even when you don't know the carrier frequency. U...
TSSP77038 38kHz IR Demodulator Breakout
·
This breakout uses Vishay's TSSP77038 infrared demodulator to give you the raw demodulated output from a 38kHz IR signal, without the extra filtering used in typical remote-control receivers. That makes it a handy choice for reflective sensing, light barriers, fast proximity detection, and modula...
Vishay TSSP58P38 IR Detector Module, 38kHz, Automatic Gain (3-Pack)
The Vishay TSSP58P38 is a unique modulated IR receiver that is designed for IR brightness detection instead of data communication for remote control. This sensor can be used with a 38 kHz modulated IR emitter and the appropriate algorithms to form a distance sensor with a range of up to a f...
IR (Infrared) Receiver Sensor [TSOP38238]
·
IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller.To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to ground and listen on pin 1. It doesn't do any decoding of the signal, just pass...