All Products

SKU: AF-3287 · MPN: 3287

A compact 3×AA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST batte...

SKU: AF-3286 · MPN: 3286

A slim 3×AAA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST battery...

SKU: AF-261 · MPN: 261

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers! We have the socket 'mating' version of this cable over here, as well as an 'extension' cable that has one of each soldered together. If you want a switch in t...

SKU: SF-CAB-13685

This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-based device’s pins.Wire length is 140mm (about 5....

SKU: PL-1164

This 15cm (6") cable features a 2-pin female JST XH-style connector with 2.5mm pitch. The two 26AWG conductors (red and black) are twisted together to reduce electrical noise, with unterminated ends that can be cut to length for your application. The 2.5mm pitch is close enough to 0.1" (2.54mm) ...

SKU: SF-GPS-00579

A 6-pin vertical JST SH connector in a surface-mount (SMD) package. With a 1.0mm pitch, this is a compact connector ideal for space-constrained PCB designs where a small, reliable connection is needed. This is the JST SH type (1.0mm pitch), which is smaller than the standard JST PH (2.0mm) conne...

SKU: AF-2880 · MPN: 2880

This matching cable set includes one 2-pin JST SM plug and one 2-pin JST SM receptacle, each with 16cm leads. The latching connectors provide a solid, compact connection that won't come apart easily, and the polarised design prevents backwards insertion. These cables are compatible with EL wire ...

SKU: SF-PRT-08613

Two pin, compact surface mount connector. We really like the solid locking feeling and high current rating on these small connectors. Documents: Datasheet

SKU: SF-PRT-08671

This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions: 100mm length Documents: JST connector

SKU: DF-FIT0255

This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units). SPECIFICATIONS  Current rating:3A AC,DC (AWG #22) Voltage rating:250V AC,DC Temperature range: -25°C to +85°C (including temperature rise in...

SKU: SF-SEN-08733

Three pin JST connector with red, black, and yellow colors. 5 inch wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy, this cable will save you 15-20 minutes over making your own wiring harness. If you need this cable and ...

SKU: SF-TOL-08734

Two pin JST connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively small, SMD JST connector. We found that many of the SMD connectors used for battery charging were too large or were not capable of through-putting...

SKU: SF-PRT-14299

This is a unique two-cell AA battery holder built specifically for the BBC micro:bit. The 6" (~150mm) cable has been terminated with a JST-PH connector. The connector mates the JST socket on the micro:bit perfectly, allowing you to easily make your project battery powered.

SKU: SF-PRT-14417

Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible with the Qwiic system!Additionally, this connector will mate with all of our Qwiic cables with a solid lock. The SparkFun Qwiic conn...

SKU: DF-FIT0148

This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units). They work with wires ranging from 28 to 26 AWG. SPECIFICATIONS 2-pin 2.0mm mating connector housing 28-26 AWG crimp pins DOCUMENTSData Sheet SHIPPING LIST Connector housing 2-pin 2.0mm(0.08") x...

SKU: DF-FIT0150

This product includes 4-pin 2.0mm(0.08") mating connector housing(10 units) and crimp pins (40 units). They work with wires ranging from 28 to 26 AWG. SPECIFICATIONS 4-pin 2.0mm mating connector housing 28 to 26 AWG crimp pins DOCUMENTSData Sheet SHIPPING LIST Connector housing 4-pin 2.0mm x...

SKU: AF-2566 · MPN: 2566

This product's about as simple as a cup of lemonade on a hot summer day.  And, like lemonade, it's just three components! This board is a sewable adapter with a 3-pin JST wiring adapter.  It's a perfect way to add a simple link between things like our Flora NeoPixels and more co...

SKU: AF-1665 · MPN: 1665

A matched pair of 6-wire cables with JST SM connectors — one plug and one receptacle. The latching connector provides a secure, compact connection that won't pull apart easily. Great for any project where you need a reliable 6-conductor plug-and-unplug connection. Key Features Matched Plug + R...

SKU: AF-1663 · MPN: 1663

A matching pair of 3-pin JST SM connector cables — one plug and one receptacle — for creating quick-connect/disconnect points in 3-wire circuits. The locking latch keeps the connection secure while still allowing easy separation when needed. Key Features JST SM Connectors – Compact, latching d...

SKU: AF-1664 · MPN: 1664

This 5-pin JST SM cable set includes a matching plug and receptacle connector, each with 168mm (6.6″) colour-coded leads. JST SM connectors feature a secure latch mechanism that keeps the connection firm while still allowing easy disconnection. Ideal for any project where you need a reliable, co...