All Products
Showing 41-60 of 88 products
IoT Node for LoRaWAN® Development Board
·
This development board is designed to make building a LoRaWAN® IoT end node much less fiddly. It combines Digi X-ON™ onboarding with the SparkFun Qwiic ecosystem, so you can connect supported Qwiic sensors and get data moving to the cloud quickly.The board ships with firmware installed that can c...
XBee WiFi Module - RP-SMA Connector
This is the XBee WiFi Module with RP-SMA connector from Digi. XBee WiFi embedded RF modules provide simple serial to IEEE 802.11 connectivity. By bridging the low-power/low-cost requirements of wireless device networking with the proven infrastructure of 802.11, the XBee WiFi creates new wireless...
Arduino GSM Shield (antenna connector)
The Arduino GSM Shield allows an Arduino board to connect to the internet, make and receive voice calls, and send and receive SMS messages. It uses the Quectel M10 radio modem and can be controlled via AT commands or the built-in Arduino GSM library. The shield communicates with the Arduino via ...
Bluno Link - A USB Bluetooth 4.0 (BLE) Dongle
Add bluetooth 4.0 to your PC, Mac directly with this USB BLE-Link. It uses the USB package which is compact and compatible with v2.1 and earlier, and also supports the latest v4.0/Bluetooth Low Energy. Now you could use this adapter to receive/transmit data. With two USB-BLE Link users can do ...
Bluno Bee - Turn Arduino to Bluetooth 4.0 (BLE) Board
Bluno Bee is a serial to bluetooth 4.0 module, it adopts XBEE form factor which is compact and is compatible with all shields with XBEE socket. Bluno Bee is designed to have voltage regulator which supports both 5V and 3.3V MCUs. Bluno Bee is talking to your Arduino serial port , and abl...
RPSMA Male to SMA Female Adapter
This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection. You should not need this adapter with any of ...
EcoDuino - An Auto Planting Kit
EcoDuino is evolving. Now the EcoDuino has an enclosure. It is protected from water splashes, so it is safe to use beside your plants. The Ecoduino now sports an Atmega32U4 which eliminates the requirement of an adapter. And sketches can simply uploaded via Mirco USB just like Arduino Leonad...
mbed Application Board
·
Turbo-charge your mbed LPC1769 dev board with this compact but feature-full application board. Fully assembled, just plug in your mbed and you will be ready to rock.Featuring: 128x32 Graphics LCD 5 way joystick 2 x Potentiometers 3.5mm Audio jack (Analog Out) Speaker, PWM Conencted 3 Axis +/1...
Crowduino With ATMega 328 V1.1
The Crowduino is Arduino compatible board. Based on Arduino Duemilanove Schematic, 100% compatible to its existing program, shield and IDEs.This Crowduino is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 ...
Bluetooth Bee
The Elecrow Bluetooth Bee is a Bluetooth V2.0+EDR serial module in an XBee-compatible form factor. It provides transparent wireless serial communication at up to 2.4 GHz, making it easy to add Bluetooth connectivity to any project with an XBee socket — no additional wiring required. Based on the...
SparkFun Digi XBee® Explorer Regulated
·
The SparkFun Digi XBee Explorer Regulated is a breakout board for Digi's XBee 3 micro form factor modules. It provides regulated power (up to 6V input), a Qwiic connector for I2C sensors, and reset/D0 buttons — everything you need to get an XBee module up and running without a USB connection. Co...
Digi XBee® 3 Low-Power LTE-M/NB-IoT, GNSS, no SIM
·
The Digi XBee 3 Global Cellular module is a compact, low-power module designed for rapid integration of cellular IoT capabilities. It combines LTE-M, NB-IoT, and 2G connectivity with Bluetooth Low Energy (BLE) and GNSS positioning in the familiar XBee 20-pin through-hole form factor. Optimised f...
Wireless Joystick Breakout Board for XBee
·
This breakout board makes it easier to build a custom wireless controller for XBee-based projects, without relying on a standard hobby RC transmitter. It is designed for makers who want to choose their own control layout for robots, vehicles and other radio-controlled builds.The board includes an...
Arduino Xbee Shield
An XBee-compatible shield for Arduino that supports a wide range of wireless communication modules including ZigBee, WiFi, and Bluetooth 2.0/4.0 bee-format boards. Stacks directly onto Arduino Uno, Leonardo, or Mega, with a built-in 5 V to 3.3 V level converter for safe interfacing with 3.3 V mod...
2mm 10pin XBee Socket - SMD
This 2 mm pitch 10-pin SMD socket mates with XBee radio modules from Digi. The surface-mount design is ideal for custom PCBs and production boards where through-hole mounting isn't suitable. You'll need two of these sockets to connect to all 20 pins on an XBee module. Key Features 2 mm Pitch ...
2mm 10pin XBee Header
This 2 mm pitch 10-pin header mates with 2 mm XBee sockets and is ideal for creating custom breakout boards, "dummy" XBee modules for testing, or any project requiring 2 mm pitch pin headers. Key Features 2 mm Pitch – Matches XBee socket spacing 10 Pins – Compatible with standard XBee footpri...
Xbee USB adapter (FTDI ready)
The DFRobot XBee USB Adapter connects XBee and Bluetooth modules to your PC via mini USB for configuration, wireless data transmission, and firmware programming. It uses an FTDI232 USB-to-UART converter chip for stable, reliable serial communication. The adapter also doubles as an FTDI programme...
Little Bird Breakout Board for XBee Module
A simple breakout board for XBee modules that brings all 20 pins out to standard 0.1″ (2.54 mm) dual-row headers. The 0.5″ spacing between header rows makes it breadboard DIP-friendly for easy prototyping. Key Features All 20 Pins Broken Out – Full access to every XBee pin 0.1″ Header Spacing...
Teensy 3.1 XBee Adapter
The Teensy 3.1 XBee Adapter connects your Teensy development board with the popular XBee wireless module, giving you a compact solution for projects requiring a reliable, no-frills wireless serial link with decent range. The adapter also doubles as a breakout board for both the Teensy and XBee. ...
2mm 10pin XBee Socket
This 2 mm pitch 10-pin socket mates with XBee radio modules from Digi, allowing you to mount your XBee without soldering it directly to a PCB. You'll need two of these sockets to connect to all 20 pins on an XBee module. These sockets can also be trimmed to work with other 2 mm pitch application...