All Products
Showing 41-60 of 100 products
Pirate Radio - Pi Zero W Project Kit
A complete internet radio project kit based on the Raspberry Pi Zero W. Includes a Pi Zero W, the pHAT BEAT DAC and stereo amplifier, a 5W speaker, and a retro-styled blue acrylic enclosure. Assembly takes approximately 30 minutes and requires soldering. The pHAT BEAT features dual MAX98357A I2S...
Expansion Shield X300 for Raspberry Pi B+/2B/3B
The X300 Expansion Shield is a feature-rich add-on board for the Raspberry Pi B+, 2B, and 3B. It integrates a wide range of connectivity and multimedia functions including SATA, WiFi, Bluetooth, a real-time clock, audio I/O, and a powered USB hub — all in a board that sits directly on top of the ...
Adafruit NeoTrellis M4 Mainboard - featuring SAMD51
·
The NeoTrellis M4 Mainboard combines an ATSAMD51 Cortex M4 processor, a 4×8 grid of NeoPixel-lit elastomer button pads, stereo audio output, microphone input, and a triple-axis accelerometer into one compact, programmable board. Think of it as a button-mashing, light-flashing, tune-making powerho...
Adafruit NeoTrellis M4 with Enclosure and Buttons Kit Pack
·
Everything you need to get started with the NeoTrellis M4 in one kit. This pack bundles the NeoTrellis M4 Mainboard, an acrylic enclosure, silicone elastomer button pads, and rubber feet — ready to assemble into a complete MIDI controller, sound board, or interactive button-pad device. The NeoTr...
Adafruit PyGamer for MakeCode Arcade, CircuitPython or Arduino
·
The Adafruit PyGamer is a pocket-sized, open-source gaming handheld built for DIY game development and retro emulation. Powered by the ATSAMD51 running at 120 MHz with 512 KB flash and 192 KB RAM, it features an analog thumbstick, six tactile buttons, a colour TFT display, and stereo audio — all ...
Adafruit PCM5100 I2S DAC with Line Level Output - 100dB SNR
·
The Adafruit PCM5100 I2S DAC converts digital I2S audio into clean, high-quality stereo line-level output through a 3.5mm jack. With 100dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pipe I2S data in and get great-sounding analogue audio out. The PCM5100 accepts 16, 2...
Adafruit PCM5102 I2S DAC with Line Level Output - 112dB SNR
·
The Adafruit PCM5102 I2S DAC converts digital I2S audio into excellent stereo line-level output through a 3.5mm jack. With an impressive 112dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pipe I2S data in and get audiophile-grade analogue audio out. The PCM5102 accepts...
Adafruit PCM5122 I2S DAC with Line Level Output - HW, I2C or SPI
·
The Adafruit PCM5122 I2S DAC delivers excellent stereo line-level audio with 112dB SNR and -93dB THD. Out of the box it works in hardware mode — just pipe I2S audio in with no MCLK or configuration needed. For advanced control, switch to I2C or SPI mode to access software volume, EQ, filtering, a...
Picade
A stylish, retro, and fun arcade cabinet for your Raspberry Pi.The Picade comes in kit form for you to build at home. All parts, panels, and components are included - you just need to supply the Raspberry Pi! We highly recommend using a Raspberry Pi 2 as the extra processing power gives great per...
Audio Adapter Board for Teensy 4.0
·
This audio adaptor lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with Teensy 4.0 (Rev D). It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input. The Teensy Audio Library lets...
3.5mm Stereo Male to Two RCA Stereo Male Y-Cable
A 1-metre Y-cable that splits a 3.5 mm stereo signal into two RCA connectors, making it easy to connect phones, tablets, laptops, or media players to home audio systems, amplifiers, and receivers. Most portable devices output audio through a 3.5 mm headphone jack, while home hi-fi equipment typi...
USB Audio Input/Output Dongle
This nifty little USB dongle adds mono audio input and stereo output through USB (1.0). It's a cheap and cheerful solution for audio input to your Raspberry Pi. After testing a wide range of USB audio dongles, this was the winner through being simple, low on noise and artifacts, and ...
Fermion: DFPlayer Pro - A mini MP3 Player with On-board 128MB Storage (Breakout)
Here comes the DFPlayer Pro---A mini simple but powerful MP3 Player! This MP3 player module supports four controlling modes: Arduino, AT command, on-board buttons, and ADKEY. You can directly press the on-board button to play or switch music without using a controller. Moreover, this player modul...
Bluetooth Amplifier Board
This compact Bluetooth amplifier board provides wireless audio playback with 5W per channel (10W total) output via dual PAM8403 amplifier chips. Stream music wirelessly from any Bluetooth 5.0 compatible device directly to your speakers. The small form factor and 3mm mounting holes make it easy t...
HIFI Digital Bluetooth Amplifier-50W*2
A HiFi digital power amplifier board with Bluetooth 5.0 and AUX input, delivering 50W per channel in a dual-channel configuration. With AM interference suppression and filtering, the board achieves THD as low as 0.1% even at sustained high-power output, producing clear, detailed sound. The board...
Picade X HAT USB-C
The Picade X HAT turns your Raspberry Pi into a retro arcade console by adding joystick and button inputs, a 3 W I2S DAC/amplifier for audio, and a safe power on/off system — all through a single HAT that powers your Pi via USB-C (no separate power supply needed). Female Dupont connectors make w...
Adafruit Audio BFF Add-on for QT Py and Xiao
The Adafruit Audio BFF is a compact add-on board that turns your QT Py or Xiao into a powerful audio playback device. It features a microSD card slot (up to 64 GB) and a MAX98357 I2S 3W amplifier, all designed to fit neatly on the back of your miniature dev board. The board connects over the SPI...
Pirate Audio: Headphone Amp for Raspberry Pi
The ultimate hackable headphone amp for your desk! Pirate Audio Headphone Amp for Raspberry Pi has an I2S DAC, headphone amplifier, high-res display, and playback control buttons.Build your own home-brew iPod Nano with Pirate Audio Headphone Amp! It's an all-in-one s...
MP3 and MIDI Codec - VS1063
VS1063 is an easy-to-use, versatile encoder, decoder and codec for a multitude of audio formats. They can be hard to get hold of but we’ve got them! The VS1063 contains a high-performance, proprietary, low-power DSP core as well as ROM memory, 16KiB instruction RAM and up to 80 KiB data RAM for...
Bluetooth 4.2 Audio Receiver Board-with an Amplifier (2x5W)
This is a small size and cost-effective Bluetooth 4.2 Audio Receiver module with dual 5W power amplifier circuits. It supports auto-reconnect and can be powered by micro USB or 3.7V lithium battery. The module can be turned into a stereo Bluetooth speaker when connected with two speakers. Also, y...
