All Products
Showing 41-60 of 100 products
4-Digit Display
Add a clear numeric readout to your next microcontroller project with this simple 4-digit LED display module. It is suited to showing counters, timers, scores and sensor values without needing lots of I/O pins.The module uses a 2-wire serial interface with CLK and DIO pins, and runs from either 3...
Gravity LED Button Module for Arduino/micro:bit - Green
·
This compact illuminated push-button module adds a simple, visible input to interactive electronics, classroom prototypes and maker projects. A transparent cap shows the integrated LED, which lights as soon as the button is pressed for clear visual feedback.It uses the Gravity PH2.0-3P connector ...
.jpg)
Gravity LoRaWAN Node Module EU868 - SX1262
·
This Gravity node module is a long-range, low-power wireless communication module for outdoor IoT sensor projects. It is based on the Semtech SX1262 RF chip, uses LoRa modulation, and operates on the EU868 frequency band for Europe and other regions that use this band.The module can work in LoRa ...
Potentiometer Module
This Potentiometer Module is from our Micro:bit 24 bit kit. You're probably already familiar with using a potentiometer as they are commonly found on many electrical devices, such as in audio equipment where they are used for volume control. After all, potentiometers are sensors! What's a sens...
Temperature Sensor Module DS18B20
A pre-wired DS18B20 digital temperature sensor on a breakout module with three labelled pins for easy connection. The DS18B20 uses the 1-Wire protocol, requiring only a single data line to communicate temperature readings to a microcontroller such as a Raspberry Pi, Arduino, or micro:bit. Key Fe...
Study Pack of HUSKYLENS for micro:bit
Note: HUSKYLENS and micro:bit board are not included. The Study Pack of HUSKYLENS for micro:bit is an HuskyLens extension kit based on micro:bit programming. It is suitable for students aged 8-19. Centered around AI image recognition, the kit is equipped with 7 external modules and 28 cards that...
Octopus 5mm LED Brick - Green
A green 5 mm LED module from the Octopus Electronic Bricks range. It connects to Arduino or micro:bit via a 3-pin sensor cable for breadboard-free, plug-and-play wiring. Control it with a digital pin (LOW = on, HIGH = off) or use PWM to adjust brightness. Key Features 5 mm Green LED – Standard...
Gravity LED Button for Arduino/micro:bit - Yellow
·
This LED-illuminated button module is a simple digital switch with a transparent cap and a yellow light. It works like a basic button, but the internal LED turns on while the button is pressed, giving clear visual feedback for interactive projects.When pressed down, the module outputs High and th...
micro:Maqueen Plus V2 (Ni-MH) with Mechanic, micro:bit V2 and Gamepad
·
This STEAM robotics bundle combines the Maqueen Plus V2 robot platform with a micro:bit V2, wireless gamepad and the micro:Maqueen Mechanic kit for building forklift, push, beetle and loader-style mechanisms.The Maqueen Plus V2 is designed for classroom learning, after-school projects and robot c...
ELECFREAKS micro:bit Nezha Pro AI Mechanical Power Kit
·
Build mechanical creations that can respond to voice commands and gesture movements. This ElecFreaks kit combines hands-on construction with AI interaction, giving young makers a practical way to explore robots, robotic arms and other moving mechanisms.The kit is built around the Nezha Pro Expans...
Micro:Bit smart Science IoT kit (without Micro:Bit)
The Smart Science IoT Kit from ElecFreaks is a comprehensive sensor and IoT learning kit built around the IoT:bit breakout board for micro:bit. It combines environmental sensors with WiFi connectivity, allowing students to collect real-world data and send it to the cloud for analysis. With senso...
micro:bit Go (On-the-go Starter Bundle)
micro:bit is a pocket-sized microcontroller designed for kids and beginners learning how to program, letting them easily bring ideas into DIY digital games, interactive projects and robotics.micro:bit comes with a variety of on-board modules, including a 5x5 LED matrix (also supports light detect...
micro:bit smart coding kit (with micro:bit)
An educational coding kit built around the micro:bit and ElecFreaks Wear:bit wearable module. Learn programming through hands-on projects covering sensors, wireless communication, audio, and interactive games — all using the micro:bit's block-based or Python programming environment. The kit incl...
Octopus 0.36'' Segment LED Brick
The Octopus 0.36" Segment LED Brick is a compact 7-segment display module designed for simple numeric output. It features a 0.36-inch common anode LED display capable of showing digits 0–9 and decimal points. Operating at 3.3V or 5V, this module is compatible with Arduino, micro:bit, and other m...
0.96'' OLED Screen Module
This 0.96″ OLED Screen Module is a compact I2C display with a simple 4-pin interface, making it easy to add visual output to your micro:bit, Arduino, or other microcontroller projects. The high-contrast OLED panel provides clear text and graphics without requiring a backlight. With just four con...
Inventor Kit for Micro: bit Starter programming kit Crowbits
Description "Inventor Kit" is the primary robot programming kit of the Crowbits series. It uses Micro:bit as the mainboard console, and combines with magnetic electronic modules as well as Lets code, a visual graphics programming software. Through simple drag-and-drop programming, kids can create...
ELECFREAKS PlanetX LED - Green
·
A green LED module from the ELECFREAKS PlanetX sensor range, designed for use with micro:bit and the Nezha expansion board. The RJ11 connector makes it simple to plug in — no soldering or breadboard required. Control brightness via analogue input, create flashing patterns, or combine with other ...
DFRobot Gravity LoRaWAN Node Module US915 (SX1262)
·
This compact wireless node module is designed for long-distance, low-power outdoor IoT projects. Built around the Semtech SX1262 and LoRa modulation, it operates on the 915 MHz US915 band and supports both direct LoRa communication and LoRaWAN networking.It can be used for point-to-point links or...
ELECFREAKS PlanetX Speech Recognition Sensor
·
The ELECFREAKS PlanetX Speech Recognition Sensor adds voice control to your micro:bit projects. Built around the SNR9815 IC, this module recognises spoken English commands and supports self-learning custom words, letting you build voice-controlled lights, cars, robots, and more. Connects to the ...
ELECFREAKS micro:bit Smart Greenhouse Kit
·
The ELECFREAKS Smart Greenhouse Kit is a hands-on STEM kit that simulates smart agriculture using a micro:bit and IoT expansion board. Students plant seeds in the built-in growth groove, monitor conditions with integrated sensors, and program automated responses — learning about environmental sci...
