All Products
Showing 21-40 of 100 products
INA237 Qwiic Current Sensor
·
Monitor DC current and power over I2C with this Qwiic breakout based on the Texas Instruments INA237 digital power monitor. It measures current, bus voltage, internal temperature and power for an in-line DC input using a 16-bit delta-sigma ADC.The board is set up for flexible wiring: use the pair...
APA-104-1010 Addressable RGB SMD LED Pack of 20
·
The APA-104-1010 is a tiny addressable RGB SMD LED for designs where full-colour control needs to fit into very little board space. Each LED uses a standard one-wire data interface with data in and data out connections.At just 1.0 x 1.0mm square, these microscopic LEDs are suited to dense layouts...
SparkPNT GNSS Flex Module - LG580P
·
Add precise positioning and orientation to a GNSS Flex carrier with this LG580P-based module. It is built for high-performance navigation, combining centimetre-level RTK positioning with real-time heading data for robotics, precision agriculture and autonomous vehicle projects.The module is part ...
SparkPNT GNSS Flex Module with mosaic-G5 P3
·
This GNSS Flex module brings Septentrio's compact mosaic-G5 P3 receiver to the SparkPNT Flex ecosystem, giving advanced navigation projects high-precision positioning in a small, low-power format.It is designed for autonomous systems, robotics and portable surveying tools where size, weight and p...
SparkPNT GNSS Flex Module - ZED-X20P
·
Build high-precision positioning into your GNSS Flex setup with this swappable ZED-X20P module. It uses the u-blox X20 engine, the successor to the F9 generation, for demanding navigation, control, robotics and vehicle applications.The module connects to a GNSS Flex pHAT carrier board via standar...
SparkPNT GNSS Flex Module - mosaic-X5 & IM19 IMU
·
This GNSS Flex module combines a Septentrio mosaic-X5 multi-band RTK receiver with a Feyman IM19 IMU for high-precision positioning, tilt compensation and dead reckoning. It is aimed at professional surveying, industrial robotics and autonomous navigation applications where reliable position and ...
Thing Plus ESP32-C5 WiFi 6 Development Board
·
Built around Espressif’s ESP32-C5-WROOM-1 module, this Thing Plus board gives IoT projects a compact microcontroller platform with dual-band WiFi 6, Bluetooth 5 LE, Zigbee and Thread connectivity. It pairs a 32-bit RISC-V single-core microprocessor with 8MB Flash and 8MB PSRAM for connected proje...
Timing GNSS Breakout - mosaic-T
·
Built around the Septentrio mosaic-T module, this breakout is made for demanding timing applications such as high-accuracy time stamping, frequency synchronisation and GPS-disciplined oscillators (GPSDO).The mosaic-T is a multi-band, multi-constellation GNSS receiver with Septentrio AIM+ technolo...
AS7343 Qwiic Spectral Sensor
·
Measure visible and near-infrared light with a compact Qwiic breakout based on the AS7343 multi-spectral sensor. It covers approximately 380nm to 1000nm and is suited to reflected, emitted and transmitted light measurements for spectroscopy tasks such as colour matching and spectral signature ana...
Soft Power Switch with USB-C
·
This board adds a laptop-style power button to your project: a simple press turns the system on, and another press can turn it off cleanly when your microcontroller is involved. If things go wrong, pressing and holding the button for ~10 seconds forces a power-down.This USB-C version has two USB ...
Soft Power Switch - JST 2mm
·
This compact power-control board gives battery-powered projects a laptop-style on/off button while still allowing your microcontroller to take part in the shutdown process. A quick press turns the system on, another press can be handled by the MCU for an orderly shutdown, and a long press provide...
LIS3DH Micro Triple Axis Accelerometer Breakout (Qwiic)
·
This ultra-small Qwiic-enabled breakout adds three-axis acceleration sensing to compact projects using the LIS3DH, a smart, low-power capacitive micro-machined accelerometer with 12-bit resolution. It can be used for translation detection and is classified as a 3DoF, or 3 Degrees of Freedom, sens...
Pico Add-On Flipper for XRP
·
This add-on board solves a common Raspberry Pi Pico HAT problem: fixed orientation. It takes the standard pinout for a Raspberry Pi Pico development board and flips it as if the Pico had been physically rotated over, facing down.That makes it useful when your Pico needs to stay in a particular or...
Qwiic OLED Display - 1.5in 128x128
·
This compact OLED board gives your project a crisp monochrome white-on-black interface in a 1.5-inch square form factor. With 128x128 pixels and a 1:1 aspect ratio, it suits custom graphics, menus, status screens and data plotting.The display uses Chip-on-Glass (COG) OLED technology, so each pixe...
Red Vision HM01B0 Camera and Touch Display Kit for RedBoard
·
Add camera input and a capacitive touchscreen to an RP2350 RedBoard IoT for machine-vision projects. This kit combines the Red Vision Touch Display for RedBoard with the Red Vision Camera Board - HM01B0 (Color), and is designed for quick setup with no soldering required.The display board plugs di...
Red Vision Touch Display Shield for RedBoard
·
Add a compact visual interface to your RP2350 RedBoard IoT with this Red Vision touch display shield. It plugs into the standard R3 footprint, giving your IoT project a 2.0" capacitive touch LCD without needing external display cabling.The board is designed to stack neatly with the SparkFun Red V...
Red Vision Touch Display for RedBoard (Without Display)
·
This interface board is for Red Vision projects where you want the camera and vision stack, but would rather send video to a larger external monitor than use a small onboard screen. With the LCD removed, it acts as a streamlined bridge between a SparkFun Red Vision Camera Board and an RP2350 RedB...
Red Vision HM01B0 Colour Camera Board
·
This Red Vision breakout brings the Himax HM01B0 colour camera module out to maker-friendly connections for robotics, embedded vision and camera experiments. The module provides a 320 x 320 pixel array with I2C control and a configurable parallel video data interface.The board breaks all pins fro...
GNSS Flex Breakout Carrier Board
·
This carrier board brings the GNSS Flex ecosystem out to a practical development breakout, so you can use your chosen GNSS Flex module on a breadboard, with a flight controller, or inside a custom navigation build. The standard 2x10 male headers accept a GNSS Flex module and expose its available ...
u-blox ZED-X20P Allband GNSS RTK Breakout (Qwiic)
·
This GNSS RTK breakout brings the u-blox X20 engine to a maker-friendly board for high-precision positioning projects. It is designed around the ZED-X20P all-band receiver and can process signals from GPS, Galileo, BeiDou, QZSS and NavIC across all GNSS frequency bands, including L-band.The board...
