All Products

SKU: AF-380 · MPN: 380

These are the highest quality & capacity batteries, the same as shipped with the iCufflinks, iNecklace, Datalogging and GPS Shields, GPS HAT, etc. One battery per order (you'll want one battery per cufflink or pendant.)Brand may vary but all battery brands are verified to have the same nomin...

SKU: KI-5681

Explore time, light, and also sound with the Kitronik Alarm Clock Kit, a fun and hands-on introduction to the ZIP Halo HD. KITRONIK ALARM CLOCK KIT: The Kitronik Alarm Clock Kit with ZIP Halo HD for microbit provides a fun introduction to features of Halo HD. This kit features a modified version ...

SKU: DF-TOY0055

A beginner-friendly DIY soldering kit that lets kids build six adorable zoo animal circuits. Each pre-cut PCB animal gets a colour-changing RGB LED and coin cell battery soldered on the back, bringing it to life with a soft blinking light. A great introduction to soldering, circuits, and electron...

SKU: AF-1867 · MPN: 1867

A breakout board with a CR1220 coin cell battery holder, an on/off switch, and 0.1″ pitch breakout pins. Ideal for powering very low-current projects or providing switchable battery backup for a real-time clock (RTC) module. The board breaks out four pins: two ground pins, one switched power pin...

SKU: AF-1868 · MPN: 1868

A simple breakout board with a CR1220 coin cell battery holder pre-soldered and broken out to 0.1″ pitch pins. Ideal for powering very low-current projects or providing battery backup for a real-time clock (RTC) module. Comes fully assembled and tested, with a stick of 0.1″ header included so yo...

SKU: EF-EF03426

IOT:bit is an expansion board based on IoT for micro:bit. It uses ESP8266 as WIFI expansion board and serial port to communicate with micro:bit. It also has extended all available IO port of the micro:bit which is leaded by GVS and you can extent various 3V E-blocks as LED, photosensitive and ser...

SKU: DF-DFR0386

A real-time clock (RTC) module designed specifically for the Raspberry Pi, built around the Maxim DS1307 chip. It communicates via I2C and includes a CR1220 coin cell battery to maintain accurate timekeeping even when the Pi is powered down. The module plugs directly onto the Raspberry Pi GPIO he...

SKU: AF-5189 · MPN: 5189

Keep track of time even when your project loses power or gets reprogrammed. This updated PCF8523 Real Time Clock breakout features STEMMA QT / Qwiic connectors for solderless I2C wiring, plus traditional breadboard headers. It works with both 3.3 V and 5 V power and logic, making it compatible wi...

SKU: AF-3296 · MPN: 3296

The Adafruit DS1307 Real Time Clock breakout keeps accurate time even when your microcontroller loses power or is reprogrammed. This battery-backed I2C RTC is one of the most widely used clock chips, making it a reliable choice for datalogging, alarms, timers, and clock projects. The DS1307 requ...

SKU: AF-3295 · MPN: 3295

Keep track of time even when your project loses power or gets reprogrammed. The PCF8523 Real Time Clock breakout is a battery-backed RTC that communicates over I2C and works with both 3.3 V and 5 V power and logic. Perfect for datalogging, clock building, time stamping, timers, and alarms. Works...

SKU: AF-3028 · MPN: 3028

A Feather board without ambition is a Feather board without FeatherWings! This is the DS3231 Precision RTC FeatherWing: it adds an extremely accurate I2C-integrated Real Time Clock (RTC) with a Temperature Compensated Crystal Oscillator (TCXO)  to any Feather main board. This RTC is the m...

SKU: AF-2345 · MPN: 2345

The Adafruit RGB Matrix HAT + RTC makes it easy to drive HUB75-type RGB LED matrices from your Raspberry Pi. This HAT plugs onto any Pi with a 40-pin GPIO header and includes a DS1307 real-time clock, so your Pi can keep accurate time even after reboots or power loss — perfect for clock and time-...

SKU: AF-2324 · MPN: 2324

The Adafruit Ultimate GPS HAT adds high-quality GPS and GLONASS positioning to your Raspberry Pi. Built around a PA1616D module, it provides precise location data and a built-in real-time clock (RTC) with coin cell backup — perfect for outdoor projects, time synchronisation, and location-aware ap...

SKU: AF-5166 · MPN: 5166

A bite-sized, satisfying clicky key switch keychain with a built-in red LED. Press the button to light it up — perfect for showing off etched glow-through keycaps or just keeping your fidgety hands busy. Powered by a CR1220 coin cell battery, the keychain includes a cord for attaching to your ba...

SKU: AF-5703

The Adafruit PiCowbell Adalogger is a Pico-sized add-on board that sockets underneath your Raspberry Pi Pico or Pico W, adding a microSD card slot, real-time clock with battery backup, and a STEMMA QT connector for I2C sensors — everything you need for data logging projects. The PCF8523 RTC keep...

SKU: AF-6355 · MPN: ADA6355

The Adafruit PiCowbell Adalogger is a data logging add-on board designed to socket underneath a Raspberry Pi Pico or Pico W. It provides a microSD card slot, a PCF8523 real-time clock with battery backup, and a STEMMA QT / Qwiic connector — everything you need for timestamped data logging project...

SKU: AF-3386 · MPN: 3386

The Adafruit PiRTC is a battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header, letting your Pi keep accurate time even when powered off. Built around the PCF8523 RTC with native Linux kernel support, it's ideal for data logging, time-stamping, alarms, and any pro...

SKU: AF-746 · MPN: 746

The Adafruit Ultimate GPS Breakout (Version 3) is a high-performance GPS module built around the MTK3339 chipset. With 66 channels, -165 dBm tracking sensitivity, and up to 10 Hz position updates, it delivers accurate and responsive location data for a wide range of projects. Version 3 introduce...

SKU: AF-3133 · MPN: 3133

The Adafruit Ultimate GPS FeatherWing brings precise, low-power GPS to the Feather ecosystem. Built around the MTK3339 chipset, it tracks up to 22 satellites on 66 channels with -165 dBm sensitivity and delivers up to 10 position updates per second — all while drawing only 20 mA. Simply plug the...

SKU: AF-2922 · MPN: 2922

Add datalogging capability to any Feather board with the Adalogger FeatherWing. This add-on combines a battery-backed real-time clock (PCF8523) with a microSD card socket, giving your project accurate timestamps and local data storage in one compact wing. The RTC communicates over I2C with a 32 ...