DFRobot
4-Soldering Zoo Animal Kit
A beginner-friendly DIY soldering kit that lets kids build six adorable zoo animal circuits. Each pre-cut PCB animal gets a colour-changing RGB LED and coin ...
Get notified when back in stock
A beginner-friendly DIY soldering kit that lets kids build six adorable zoo animal circuits. Each pre-cut PCB animal gets a colour-changing RGB LED and coin cell battery soldered on the back, bringing it to life with a soft blinking light. A great introduction to soldering, circuits, and electronics for ages 6 and up.
The kit includes six different zoo animals that can be decorated with accessories, placed in a paper zoo, or pinned anywhere. Perfect for home, classroom, or after-school activities.
Zoo Animals Included
- Llama
- Panda
- Lion
- Bunny
- Sheep
- Giraffe
Key Features
- 6 Animal PCBs – Pre-cut, soft-edge boards with immersion gold finish
- RGB LEDs – Soft colour-changing light with smooth transitions
- Beginner Level – Simple circuits suitable for ages 6+
- RoHS Compliant – Environmentally friendly materials
- Battery Life – Up to 48 hours per CR1220 coin cell
- Assembly Time – Approximately 2 hours for all six animals
Kit Contents
- 6× Pre-cut animal PCBs
- 6× RGB LEDs
- 6× CR1220 3V coin cell batteries
- 6× Battery holders
- 6× Battery insulation pull tabs
- 6× Double-sided adhesive tapes
Jargon buster
Plain-language definitions for the technical terms used above.
- LED
- A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.
- PCB
- A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.
- RGB
- Short for red, green and blue, the three primary colours of light that are mixed in varying amounts to make a wide range of colours. In electronics RGB can refer to an LED or pixel that blends these three colours, or to a colour signal or interface that carries separate red, green and blue channels.
Find this product in
Brands
Related Tutorials
Free guides on learn.littlebird.com.au
