All Products

SKU: AF-2548

Explore new microcontroller worlds with an ST-Link Programmer & Emulator / Debugging dongle. This little USB stick contains a microcontroller with the code for ST's classic programmer/emulator for STM8 and STM32 bit processors. Since STM's are so common, this tool will come in handy wheneve...

SKU: EC-DPO01117E

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. In addit...

SKU: PR-PIM727

An all-in-one, RP2350 powered controller for HUB75 LED matrix panels. Interstate 75 W is a RP2350-based driver board for HUB75-style LED matrices - they're the chainable LED panels that you sometimes see making up video walls or big advertising displays. It's designed to plug neatly into the bac...

SKU: EC-AP0500STK

AVRISP2.0 STK500 programmer help you download your codes into your controller or bootloader to your Arduino board, it communicates with PC via USB port, and it works with most of PC & notebook computers.Features It can support a wide range of ATMEL AVR microcontroller. It can works with AVR Studi...

SKU: DF-TEL0190 · MPN: TEL0190

RainbowLink V2 is a pocket-sized USB Type-C serial debugging workstation that combines four independent communication channels with useful field power outputs. It replaces multiple USB dongles for RS485, RS232 and TTL UART work, making it well suited to field engineering, IoT development and indu...

SKU: AF-5879 · MPN: ADA5879

The Adafruit UPDI Friend is a compact USB serial programmer for ATtiny microcontrollers that use the UPDI (Unified Program and Debug Interface) protocol. Built around the CH340E USB serial converter with USB Type-C, it provides reliable cross-platform programming with switchable 3V or 5V power an...

SKU: AF-5681

The Adafruit ATtiny816 Breakout with seesaw is a compact development board that combines an ATtiny816 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. Pre-programmed with seesaw firmware, it acts as an I2C-controlled co-processor — adding GPIO, ADC, PWM, and NeoP...

SKU: DF-DFR0942

The ART-Pi from RT-Thread Team is a DIY open source hardware with extended functions specially designed for embedded software engineers and open source makers. The equipped high-performance MCU, practical peripherals and rich extension ports make it an excellent choice for most engineers to study...

SKU: SF-KIT-19935

The SparkFun MicroMod mikroBUS™ Starter Kit is designed to give you just what you need to start using the MicroMod and Click ecosystems side-by-side. The core of this kit is designed around the SparkFun MicroMod mikroBUS™ Carrier Board and the SparkFun MicroMod STM32 Processor but you will also r...

SKU: AF-5690

The Adafruit ATtiny1616 Breakout with seesaw is a versatile development board that combines an ATtiny1616 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. It works as both a standalone dev board and an I2C peripheral that adds GPIO, ADC, PWM, and NeoPixel support...

SKU: AF-2209

The SEGGER J-Link BASE is an industry-standard JTAG/SWD debugger and programmer for ARM-based microcontrollers. It connects via USB and provides hardware debugging, flash programming, and real-time memory access across a wide range of ARM cores — from Cortex-M0 to Cortex-A9. The J-Link is toolch...

SKU: SF-DEV-21326 · MPN: DEV-21326

This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...

SKU: SF-DEV-17712

With a 32-bit ARM® Cortex®-M4 RISC core, the SparkFun STM32 Thing Plus brings power and precision to your projects. The STM32 Thing Plus provides you with an economical and easy to use development platform if you're needing more power with a minimal working space. This Thing comes flashed with t...

SKU: PI-CODEBUG

CodeBug is a cute, programmable and wearable device designed to introduce simple programming and electronic concepts to anyone, at any age. It is easy to program CodeBug using the online interface, which features colourful drag and drop blocks, an in-browser emulator and engaging community fea...

SKU: SF-WRL-30414 · MPN: WRL-30414

Turn a wired UART link into a dependable short-range Bluetooth® serial connection for microcontrollers, computers and mobile devices. It pairs, connects and passes data between TX and RX lines, buffering serial streams for byte-perfect delivery between radios.This JST version swaps the usual pins...

SKU: DF-DFR0864

This compact STM32F411 development board can be well embedded in your projects. Featuring the STM32F411CEU6, this chip has 512KB of ROM, 128KB of SRAM and runs at 100MHz. There is a spot on the bottom for SOIC flash memory, which allows you to solder SPI flash memory to give yourself more spac...

SKU: AF-462

Turn any Arduino into an AVR chip programmer with this shield kit. Designed for burning Arduino bootloaders onto blank ATmega328P chips, it can also be configured as a standalone AVR ISP programmer that works without a computer — program blank chips up to 10× faster with audio feedback from the b...

SKU: DF-DFR0116

This is a USB AVR programmer supported by offical Arduino IDE. Once the Arduino has lost its bootloader for some reasons, use this programmer to reburn the bootloader and save the dead Arduino. This programmer works really well for ATmega168 and ATmega328 and should work with all the AVR micros ...

SKU: AF-4877

This simple development board for the STM32F411 is a great way to add a powerful STM chip to your next project. Featuring the STM32F411CEU6, this chip has 512 KB of flash, 128 KB of SRAM and runs at 100 MHz. There's a spot on the bottom for SOIC flash memory - you could solder on a 2 MB SPI flash...

SKU: AF-1465

Stop searching for the AVR ISP pinout every time you program. This simple breakout adapter converts the standard 2×3 AVR ISP box header to two breadboard-friendly 1×3 rows, making it easy to wire up your programmer without crossed wires or guesswork. The adapter plugs neatly into any standard br...