All Products

SKU: SF-DEV-11021

The Arduino Uno R3 is the most popular Arduino board and an ideal starting point for learning electronics and programming. Built around the ATmega328 microcontroller, it offers a robust platform for prototyping, interactive projects, and connecting to sensors, actuators, and other hardware. The ...

SKU: DF-DFR0181

This is the new Arduino Uno Rev 3. In addition to all the features of the previous board, the arduino Uno Rev 3 now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linu...

SKU: SF-KIT-21301

A note for SparkFun Inventor's Kit v4.1 users: The only change that was made from the SIK v4.1 to the SIK v4.1.2 is our new carrying case. All of the internal parts and instructional guide have remained the same! The SparkFun Inventor's Kit (SIK) is a great way to get started with programmi...

SKU: SF-PRT-28385 · MPN: PRT-28385

This is a simple single-row female header socket with 14 holes, suitable for standard 0.1 inch prototyping layouts.Use it for removable connections on perfboard, custom PCBs, breakout boards, shields or other maker projects that use 2.54 mm pitch headers.Specifications:Connector type: Female head...

SKU: SF-PRT-27906 · MPN: PRT-27906

This single-row female header provides 20 straight receptacles on standard 0.1 inch (2.54 mm) spacing, making it useful for prototyping, repairs and custom board connections.The strip can be cut down to the length you need with a pair of wire cutters. Please note that you will probably lose one p...

SKU: SF-KIT-15716 · MPN: KIT-15716

This passive adapter lets a Teensy development board connect to the standard Arduino 1.0 (R3) shield footprint, making it easier to reuse existing Arduino shields without a breadboard full of jumper wires.Solder your Teensy board, sold separately, to the marked footprint on the adapter, then plug...

SKU: DF-DFR0789-R · MPN: DFR0789-R

This illuminated pushbutton module is a simple self-locking switch with a built-in red LED for clear visual feedback. Press it once and the module outputs High while the LED turns on; press it again and the output goes Low while the LED turns off.It is designed for easy use in Arduino, micro:bit ...

SKU: DF-FIT0916-MM · MPN: FIT0916-MM

This 5 pack of labelled 4-pin male-to-male DuPont cables is designed to make wiring Gravity modules, breadboards and development boards clearer during prototyping. Each 30 cm cable includes printed I2C and UART pin tags on the wires, helping you identify power, ground and signal lines without rel...

SKU: SF-COM-16916 · MPN: COM-16916

Add letters, numbers and symbols to your project with red fourteen-segment digits that are much more flexible than a basic seven-segment display. This Qwiic display connects over I2C, so you can plug it in without soldering, without working out SDA and SCL by hand, and without adding separate vol...

SKU: SF-DEV-27510 · MPN: DEV-27510

Add the user interface and power features needed to take a compatible SparkFun development board into the field. This shield brings together battery power, charging, storage and controls in a compact add-on board.Power is handled with a LiPo battery connector, charger, fuel gauge and an on/off sw...

SKU: SF-DEV-27924 · MPN: DEV-27924

Control a project with muscle activity instead of buttons, levers or joysticks. The MyoWare® 2.0 Muscle Sensor is an all-in-one surface electromyography (sEMG) sensor that detects the electrical signals generated when a muscle flexes, then outputs an analogue signal representing the strength of t...

SKU: SF-DEV-27874 · MPN: DEV-27874

The Alchitry Au V2 is a powerful FPGA development board built around a Xilinx Artix 7 device. It is aimed at engineers, students and makers who are ready to move beyond microcontroller-style programming and into field-programmable gate arrays.The board breaks out 104 IO pins across two headers an...

SKU: DF-FIT1020 · MPN: FIT1020

This protective back cover is designed for the UNIHIKER K10, helping shield the exposed back-side components from accidental contact and unexpected short circuits during classroom, workshop and maker use.The case is made from high-toughness plastic, giving the board extra protection against scrat...

SKU: DF-DFR0216-2 · MPN: DFR0216-2

This compact DFRobot microcontroller bundle is designed for learning, prototyping and physical computing projects. The DFRduino Uno V3.0 is fully compatible with Arduino UNO R3 and the Arduino IDE open-source development environment, which uses the Processing / Wiring language.The board is based ...

SKU: SF-WIG-21277 · MPN: WIG-21277

Need more Qwiic ports without forcing every board into a single daisy chain? This star-shaped Qwiic MultiStar acts as a hub for the I2C bus, adding four extra usable Qwiic ports to a board that only has one.The board has five Qwiic connectors in total. One connects back to your main board, leavin...

SKU: SF-KIT-29326 · MPN: KIT-29326

Start learning embedded electronics with a complete MicroPython kit designed for beginners. It guides you from blinking your first LED through to building and programming an autonomous robot, with no prior programming or electronics experience required.The kit is built around MicroPython, a begin...

SKU: SF-DEV-18158 · MPN: DEV-18158

This Arduino-compatible development board keeps the familiar Uno-style layout while adding a few genuinely handy upgrades for modern projects. Built around the ATmega328P, it works with the Arduino IDE and fits the Uno R3 footprint, so it is a straightforward choice if you want broad compatibilit...

SKU: AF-3777

Perhaps you've been assembling a new robot friend, adding a computer for a brain and other fun personality touches. Now the time has come to let it leave the nest and fly on its own wings– err, wheels!  These durable (but affordable!) plastic gearbox motors (also known as 'TT' mot...

SKU: AF-3597

This simple but effective enclosure will fit any 'classic Arduino' shaped development board - we've tested it for sure with the Arduino UNO R3, Adafruit Metro and Adafruit Metro Express. It's clear so you can see all your onboard LEDs and silkscreen labels. There are four small screws you ca...

SKU: DF-DFR0067

This Gravity-compatible DHT11 sensor provides calibrated digital temperature and humidity readings via a single data pin. With an integrated 8-bit microcontroller and factory-calibrated coefficients stored in OTP memory, it delivers reliable measurements with minimal setup. The Gravity 3-pin int...