All Products

SKU: SF-COM-08377

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 330Ohm resistors make excellent LED current limiters and are great for general use. Need more than one? Checkout our bags of resistors. If you need a bunch of these, you can get good bulk discounts ...

SKU: SF-COM-30221 · MPN: COM-30221

This isolated resistor network packages eight individual 330 Ohm resistors into one compact 16-pin, 2506 surface-mount component.Each resistor element is rated for 63mW with a ±5% tolerance, making the array useful for designs that need several matching pull-up, pull-down, or line-terminating res...

SKU: SF-PRT-14490

Standard 330 Ω through-hole resistors rated at ¼ W with ±5% tolerance. These thick-lead versions fit securely into breadboards with minimal movement, making them reliable for prototyping. 330 Ω resistors are commonly used as LED current limiters and for general-purpose circuit applications. Spe...

SKU: SF-COM-11508

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We’ve opted for a new and more breadboard-friendly lead thickness (they’re a bit thicker than our last ones). These resistors...

SKU: SF-COM-18270 · MPN: COM-18270

This surface-mount resistor provides a 330 Ohm value in a compact SMD format for PCB assembly, repairs, prototyping and small electronics builds.It is a thick film resistor with 1/10W rated power and ±1% tolerance. The part is sold as a single resistor, making it handy when you only need a few sp...

SKU: PI-COM-B005

580 resistors (29 values, 20 pieces of each) go into this great starter pack (or refill!) with a wide range of useful values. The kit contains 20 each of:10Ω22Ω47Ω68Ω100Ω120Ω150Ω180Ω220Ω270Ω330Ω470Ω560Ω680Ω1kΩ1.2kΩ1.5kΩ1.8kΩ2.2kΩ2.7kΩ3.3kΩ4.7kΩ5.6kΩ6.8kΩ8.2kΩ10kΩ22kΩ47kΩ100kΩ Rated for&nb...

SKU: SF-COM-10855

If you ever find yourself connecting handfuls of resistors to the ground bus of your breadboard, you may consider these SIL-packaged resistors as a time-saving alternative. This Singe In-Line component is actually 5 individual 330 Ohm resistors that share a common terminal on pin 6 (denoted with ...

SKU: SF-PRT-14491

A pack of 20 through-hole 10 kΩ resistors with thick leads designed for a snug fit in solderless breadboards. These are standard ¼ W, ±5% tolerance PTH resistors — ideal for pull-ups, pull-downs, current limiting, and general prototyping. Specifications Resistance – 10 kΩ Tolerance – ±5% Pow...

SKU: LB-LS0317-330

These are your run-of-the-mill 1/4 Watt  5-band resistors. Commonly used in breadboards and other prototyping applications, these 330 ohm resistors make excellent LED current limiters and are great for general use. These thick-lead versions of the resistors fit snugly into a breadboard wi...

SKU: SF-COM-08374

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. Need more than one? Checkout our bag of resistors. If you need a bunch of these, you can get good bulk discounts on Digike...

SKU: SF-PRT-14494

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1M ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with ver...

SKU: SF-COM-18433 · MPN: COM-18433

This is a single through-hole resistor for general electronics work, prototyping and repairs. It is well suited to breadboards and perf boards, with SparkFun noting a newer, more breadboard-friendly lead thickness than their previous version.Use it anywhere you need a simple fixed resistor in a t...

SKU: AF-5832 · MPN: ADA5832

This breakout brings the INA228 power monitoring chip out to an easy-to-use board for measuring DC current, bus voltage and calculated power on either the high side or the low side of a circuit. It combines a wide common-mode range of up to +85VDC with a 20-bit ADC, giving you precise readings fr...

SKU: SF-GPS-30975 · MPN: GPS-30975

Built around the u-blox ZED-F9T-20B receiver, this breakout is made for projects where precise time matters as much as location. Under clear skies it can provide five nanoseconds of timing accuracy without requiring external GNSS correction data, making it suitable for 5G IoT networks, distribute...

SKU: SF-PRT-28203 · MPN: PRT-28203

  The SparkFun Qwiic 5V Boost simplifies interfacing 5V I2C devices with the 3.3V Qwiic ecosystem. It takes the 3.3V I2C signals and power from its Qwiic connectors and boosts them to 5V, available on the PTH pins. This is perfect for powering peripherals like RGB LEDs or DC fans commonl...

SKU: SF-COM-18435 · MPN: COM-18435

This through-hole resistor is a simple, breadboard-friendly passive component for prototyping and general electronics work. It is commonly used with breadboards and perf boards, making it handy for pull-ups, pull-downs, voltage dividers, current limiting and signal conditioning.The leads are desi...

SKU: TB-RR0632

A pack of eight 330kΩ metal film resistors rated at 0.5W (½W) with 1% tolerance. These through-hole axial resistors are the same physical size as standard ¼W carbon film types, making them a drop-in upgrade where higher power handling is needed. Specifications Resistance – 330kΩ Tolerance – 1...

SKU: AF-2680

OK you've signed up for Adafruit.io and you're ready to build something cool and Internet-connected. All you need is this starter kit which will get you going with lots of parts that go very well with our service and are the most common sensors and actuators you may want. Sense light, motion, ...

SKU: SF-COM-30156 · MPN: COM-30156

This is a basic 47 kOhms through-hole resistor for general electronics prototyping and repairs. It is rated for 1/4 Watt with a ±5% tolerance.The PTH leads make it easy to use with breadboards, perf boards and hand-soldered circuits. It is supplied as a single resistor, handy when you only need o...

SKU: SF-PRT-14492

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1K ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with ve...