All Products

SKU: AF-5767

The Adafruit TSC2046 is an SPI resistive touch screen controller that offloads touch reading from your microcontroller. Instead of tying up analog pins and constantly polling, the TSC2046 handles all touch sensing over SPI and provides an interrupt pin that signals when a touch is detected. The ...

SKU: EC-DIS04028H

CrowPanel ESP32 Display 2.8-inch SPI module is a powerful HMI touch screen with a 320*240 resolution LCD display. It uses the ESP32-WROOM-32 module as the main control processor, with a dual-core 32-bit LX6 microprocessor, integrated WiFi and Bluetooth wireless functions, a main frequency of up t...

SKU: DF-DFR0665

The 2.8" IPS TFT LCD Touchscreen is a full-colour display module with integrated resistive touch and a MicroSD card slot. Driven by the ILI9341 display controller and XPT2046 touch controller, it communicates over SPI and works with both 3.3V and 5V logic. The IPS panel provides wide viewing ang...

SKU: EC-AMS320240TFT

The 2.8" TFT Touch Shield V4.3 is an Arduino-compatible display shield featuring a 240×320 colour LCD with a resistive touchscreen and onboard SD card socket. It communicates over SPI, keeping pin usage low and leaving more pins available for other components. Driven by the ILI9341 controller, t...

SKU: AF-5423

The Adafruit TSC2007 is an I2C resistive touch screen controller that offloads touch reading from your microcontroller. Instead of using multiple analog pins and constant polling, the TSC2007 handles all the touch sensing over a simple I2C connection and provides an interrupt pin that signals whe...

SKU: WS-30897 · MPN: 30897

A 3.5-inch IPS touchscreen display with 320×480 resolution and resistive touch control. Connects via SPI interface, making it compatible with Raspberry Pi, Raspberry Pi Pico, ESP32, and Arduino. The embedded XPT2046 touch controller provides precise resistive touch input through a separate SPI ch...

SKU: AF-1651

The 2.8" TFT Touch Shield with Resistive Touch Screen plugs directly into any Arduino UNO or Mega-shaped board, providing a bright, full-colour display with touch input and an onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI fo...

SKU: WS-12287

A 3.5" IPS resistive touchscreen display HAT for Raspberry Pi with 480×320 resolution and wide 160° viewing angles. Connects via SPI and sits directly on the Pi's 40-pin GPIO header. Compatible with all Raspberry Pi models. Supports FBCP software driver for configurable resolution and dual-displ...

SKU: AF-1743

A large 3.2" colour TFT LCD breakout board with a built-in resistive touchscreen and a microSD card socket. The 240×320 pixel display is driven by the ILI9341 chipset and features a bright 6-LED white backlight. The breakout board includes 3–5 V level shifters, making it compatible with both 3.3 ...

SKU: AF-2354

This 7.0" TFT display packs 800×480 pixels with an LED backlight and a 4-wire resistive touchscreen overlay. With 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins), it's ideal for projects requiring a large, interactive display area. This is a raw pixel-dot...

SKU: WS-19804

The 2.8" Touch Display Module is designed for the Raspberry Pi Pico, featuring a 320×240 IPS screen with 262K colours and a resistive touchscreen. It connects via the onboard female pin header for direct attachment to the Pico — no wiring required. Driven by the ST7789 display controller and XPT...

SKU: AF-2478

Add a full-colour touchscreen to your project with this 2.4" TFT LCD breakout. The 240×320 pixel display delivers vivid RGB colour with individual pixel control, driven by the ILI9341 controller with built-in RAM buffering so your microcontroller does minimal work. A resistive touchscreen overlay...

SKU: AF-1676

If you already have a 7" TFT that is about 165mm x 105mm in size (with a visible area equal to or smaller than 152mm x 91mm), you can put this glass resistive overlay over it to add a resistive touch screen. To use, first remove the protective plastic wrap from both sides. Attach to your touc...

SKU: AF-4278

A 3.2" TFT LCD display module with a built-in resistive touchscreen. The 320×240 pixel screen is driven by the ILI9341 chipset and supports SPI, 8-bit parallel, and 16-bit parallel interfaces. This is the bare display module only — no PCB or breakout board is included. A 50-pin, 0.5 mm pitch, to...

SKU: AF-1591

This 4.3" TFT display offers a 480×272 pixel resolution with 24-bit colour (8 red, 8 green, 8 blue parallel pins), an LED backlight, and a resistive touchscreen overlay. It's well-suited for projects that need a large display area for graphics or a user interface. This is a raw RGB TTL (pixel-do...

SKU: AF-3305

The Adafruit TFT 50-Pin to 40-Pin + AR1100 Touchscreen Adapter converts Adafruit RTD266X driver boards with 50-pin TFT connectors to work with 40-pin TFT displays. It also includes a built-in AR1100 resistive touch controller, adding USB touchscreen input to your display setup. The AR1100 acts a...

SKU: WS-19907

A 3.5" IPS resistive touchscreen display module designed for the Raspberry Pi Pico. With 480×320 resolution and 65K colours, it uses the ILI9488 display driver and XPT2046 touch controller over SPI. The module plugs directly onto the Pico via an onboard female pin header — no wiring required. Fe...

SKU: AF-1774

The 2.8" TFT Display with Resistive Touchscreen is a bare LCD module featuring 320×240 resolution with individual RGB pixel control. Driven by the ILI9341 chipset, it supports SPI (3- or 4-wire), 8-bit parallel, and 16-bit parallel interfaces. The resistive touchscreen is an analogue type that r...

SKU: WS-24080

Raspberry Pi 2.8inch LCD expansion module, 240 × 320 resistive touch screen for Raspberry Pi Zero / Zero 2 W Series boards, Works with other POD modules2.8inch LCD Display Module Designed for Raspberry Pi  The POD 2.8inch Resistive Touch Display Module is the 2.8inch LCD expansion ...

SKU: AF-3575

The Adafruit Touch Screen Breakout Board provides a simple way to connect a 4-wire resistive touch panel with a 1.0mm pitch FPC connector to your project. The connector is soldered onto a compact breakout board, with the four resistive wires broken out to standard through-hole pads for easy bread...