All Products

SKU: AF-1528

A general-purpose oscilloscope probe rated for signals up to 100MHz. Features a sturdy spring-loaded hook clip for hands-free probing and a separate ground clip for secure connections. Connects to your oscilloscope via a standard BNC connector. A reliable, good-quality probe suitable for everyda...

SKU: DF-FIT0909

This is a “5-track, 4-wave line” digital storage oscilloscope for general-purpose electronic engineering tasks and it is based on the ARM Cortex M3 core. The oscilloscope uses FPGA to manage the external ADC’s control and data cache mode. It provides 4 application partitions for loading and ...

SKU: DF-SEN0600 · MPN: SEN0600

##Introduction The RS485 Soil Sensor is designed for real-time monitoring of soil temperature and humidity, ideal for large-scale agricultural applications, greenhouse management, and fruit orchards' automatic irrigation systems. Utilizing the MODBUS-RTU protocol via RS485 communication, the sens...

SKU: AF-3290

A platinum resistance temperature detector (RTD) with a 100 Ω resistance at 0°C, offering superior accuracy and long-term stability compared to thermocouples and thermistors. PT100 sensors are widely used in laboratory and industrial temperature measurement where precision and repeatability matte...

SKU: DF-DFR0300-H

Gravity: Analog Electrical Conductivity Sensor / Meter(K=10) OverviewDFRobot Gravity: analog electrical conductivity sensor/meter(K=10) is particularly used to measure the high electrical conductivity liquid, such as seawater, concentrated brine, etc. The measurement range is up to 100ms/cm. This...

SKU: EC-SEE00804D

The All-in-one Starter Kit for ESP32-P4 is a complete learning platform built around Espressif's ESP32-P4, a high-performance 32-bit RISC-V dual-core microprocessor with powerful image and voice processing capabilities. It integrates 16 common sensor modules on a single circuit board, eliminating...

SKU: DF-SEN0451 · MPN: SEN0451

This industrial Gravity kit measures electrical conductivity in aqueous solutions, helping you evaluate water quality by tracking dissolved content or salinity. It is suited to hydroponics, aquaculture and environmental water monitoring where long-running measurements are needed.The pro probe is ...

SKU: SF-TOL-18627

An 8-channel USB logic analyser with sampling rates up to 24 MHz, ideal for debugging UART, I2C, SPI, and other digital communication protocols. Compatible with both 3.3 V and 5 V logic levels and powered directly via the USB Type-C connection. Works with PulseView and the open-source sigrok sof...

SKU: SF-CAB-00504

A BNC to alligator clip cable for connecting oscilloscopes, function generators, and other BNC-equipped instruments to test points, components, and bare wires. The cable has a standard BNC male connector on one end and a pair of alligator clips on the other. Specifications Connector A – BNC ma...

SKU: SF-CAB-00509

A pair of banana plug to alligator clip cables in red and black, ideal for connecting multimeters, power supplies, oscilloscopes, and function generators to your circuit or test points. Specifications Connector A – 4 mm banana plug Connector B – Alligator clip Length – 91 cm (36″) Quantity ...

SKU: WS-29330 · MPN: 29330

The Waveshare RP2350-GEEK is a compact development board built around the Raspberry Pi RP2350 microcontroller, featuring a built-in 1.14-inch colour LCD and CMSIS-DAP debug probe. It serves as both a standalone development platform and a USB debugger for other ARM-based microcontrollers. The boa...

SKU: DF-SEN0496

This full-scale oxygen sensor uses an original AO2 CiTiceL electrochemical probe to measure oxygen concentrations from 0–100%Vol via I2C digital output. A built-in calibration algorithm on the signal board supports single-point or double-point calibration for accurate readings in demanding enviro...

SKU: DF-SEN0713 · MPN: SEN0713

This industrial-grade chlorophyll sensor measures chlorophyll concentration in water using the fluorescence principle, making it useful for algae monitoring in rivers, lakes, ponds, aquaculture systems and field research sites.The probe and housing are integrated into a single waterproof unit, wi...

SKU: AF-3825

Testing is an important step in board manufacturing. And it can be super tricky on a fully populated PCB. So how can you test connections when you have an assortment of components blocking your probe? These "mini loop type" Small PCB Test Points easily snap in to your proje...

SKU: AF-3824

Testing is an important step in board manufacturing. And it can be super tricky on a fully populated PCB. So how can you test connections when you have an assortment of components blocking your probe? These "mini loop type" Small PCB Test Points easily snap in to your project, and they...

SKU: SF-DEV-21326 · MPN: DEV-21326

This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...

SKU: DF-SEN0467

This is a sensor that detects hydrogen sulfide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of hydrogen sulfide in the environment. Can be widely used in the detection...

SKU: DF-DFR1226-1 · MPN: DFR1226-1

Built for embedded projects that need desktop-class software support, this palm-sized x86 single-board computer combines an Intel Processor N150 with 8GB of LPDDR5 memory and 64GB of onboard eMMC storage. It keeps the classic LattePanda V1 88mm x 70mm footprint and interface layout, making it a p...

SKU: LB-LS2696

A waterproof NTC thermistor temperature sensor with a 100cm (1 metre) cable and stainless steel probe. The 10KΩ resistance at 25°C and standard B-constant make it easy to read with an Arduino or other microcontroller ADC input — just use a voltage divider with a matching 10K resistor. Key Featur...

SKU: DF-DFR0558

This Gravity I2C high-temperature sensor pairs a signal amplification module (MAX31855K) with a stainless steel sheathed K-type thermocouple probe for measuring temperatures up to 800 °C. The module converts the thermocouple's millivolt signal to a 14-bit digital reading over I²C, with cold-junct...