All Products

SKU: DF-MBT0050-18650

The Maqueen Plus V3 is an advanced STEM educational robot platform designed for primary and secondary school students. Powered by a BBC micro:bit (not included), it combines a matrix laser ranging sensor, high-precision motor encoders with PID control, and built-in line-tracking algorithms to sup...

SKU: LB-LR0180

Including CNC Shield V3.0The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers.It has in total 4 channel slots for A4988 stepper motor driver modules for driving 4 channel of stepper motors. Each channel of stepper motor only needs 2 I...

SKU: AF-6000 · MPN: ADA6000

The Adafruit Feather RP2350 brings the powerful RP2350 microcontroller to the classic Feather form factor, giving you full compatibility with the entire FeatherWing ecosystem. With dual Cortex-M33 cores running at 150 MHz, 520 KB of SRAM, and 8 MB of flash, this board delivers roughly twice the p...

SKU: SF-WRL-18712 · MPN: WRL-18712

Built for field deployments well beyond WiFi and mobile coverage, this compact tracker combines an Iridium 9603N Short Burst Data modem with the Arduino-compatible Artemis module. It can send and receive short satellite messages for remote sensing, asset tracking, high-altitude ballooning, ocean ...

SKU: DF-DFR0123

This 20W adjustable DC-DC boost converter with a digital display is based on the professional boost chip and supports 3~32V power input, 5~35V output, and an accuracy of ±0.05V. The switching frequency is 400KHz, the conversion efficiency can reach 94%, it has the functions of overheating prote...

SKU: DF-TEL0026

A Bluetooth 2.0 serial module for Arduino, featuring the CSR BC417143 chip with a double-board design for electrostatic protection. Provides transparent serial data communication over Bluetooth with a configurable baud rate from 4800 to 1,382,400 bps. Compatible with most Bluetooth adapters, lap...

SKU: DF-DFR0100

INTRODUCTION Welcome to the electronic interaction world! DFRobot proudly presents the Arduino Beginner/Starter Kit for those who are interested in learning about Arduino and electronics. Starting from basic LED control to more advanced environmental sensing, monitoring and actuators. This ki...

SKU: SF-SEN-22858

A combined air quality and environmental sensor breakout featuring the ENS160 (air quality index, eCO2, TVOCs) and BME280 (temperature, humidity, barometric pressure) on a single Qwiic-enabled board. The two sensors work together — the BME280 provides real-time humidity and temperature data that ...

SKU: DF-DFR0116

This is a USB AVR programmer supported by offical Arduino IDE. Once the Arduino has lost its bootloader for some reasons, use this programmer to reburn the bootloader and save the dead Arduino. This programmer works really well for ATmega168 and ATmega328 and should work with all the AVR micros ...

SKU: AF-960

Give your Ultimate GPS V3 a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a 5 meter long cable so it will easily reach wherever you need it to. The antenna is magnetic so it will stick to the top of a car or truc...

SKU: DF-DFR0835

This 4.7" e-ink display board integrates an ESP32-WROVER-E module (ESP32-D0WDQ6 V3) with 16MB Flash and 8MB PSRAM, providing a complete development platform for low-power e-ink projects. The display supports 16 grayscale levels and partial refresh for faster screen updates. The board features 3 ...

SKU: DF-ROB0156-L

Note: Maqueen, micro:bit board and battery are not included. Maqueen Loader includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as, metal servo, mechanical parts, screws. Just a simple installation, then your Maqueen Plus Car is r...

SKU: AF-1405

Get started with the fabulous Adafruit Flora platform with this lovely budget kit, just enough to get you started with this fun wearable computer. Included are enough parts to make your first wearable electronic project. There's a Flora motherboard, four ultra-bright chainable RGB pixels, a 3x...

SKU: PH-105844 · MPN: 105844

The Argon ONE V3 M.2 NVME case for Raspberry Pi 5 gives you all of the awesome features of an Argon ONE V3 case with the added ability to add your own M.2 NVME storage (drive not included)!The lower NVME section of this case connects to your Raspberry Pi 5 via the PCI-E connector and enables the ...

SKU: AF-16

A blank metal tin in the classic Altoids gum size — perfect for housing small electronics projects. Custom-made with a flattened bottom (instead of rounded) so components sit flush inside. Ideal for building portable USB chargers, MintyBoosts, and other compact builds. Specifications Outside D...

SKU: DF-FIT0889 · MPN: FIT0889

The MDP-XP kit brings Miniware’s modular Mini Digital Power System into a programmable linear DC supply setup for lab, repair and development work. It supports flexible stacking, 2.4G wireless display and control, microsecond transient response, high frame rate real-time waveform sampling and ult...

SKU: DF-DFR0654-F

FireBeetle ESP32-E, specially designed forIoT, is an ESP-WROOM-32E-based main controller board with dual-core chips. It supports WiFi and Bluetooth dual-mode communication, and features small size, ultra-low power consumption, on-board charging circuit and easy-to-use interface, which can be c...

SKU: DF-FIT0300

This is a 2 DOF robot gripper that can be installed with 2 servos so as to control gripper opening and closing with one servo, and steering gear motion control (or rotation) with the other servo. Velocity range is 0 to 54 mm (0 to 2.13"). Total weight about 45 g. The servo slot fit most...

SKU: AF-5344

ESP32-WROOM-DA (the DA is for Dual Antenna) is a powerful Wi-Fi + Bluetooth Classic + Bluetooth LE MCU module, with two complementary PCB antennas in different directions. Packed with 8 MB of internal QSPI Flash, it has lots of memory and great WiFi connectivity no matter where or how it is inst...

SKU: EC-AP0500STK

AVRISP2.0 STK500 programmer help you download your codes into your controller or bootloader to your Arduino board, it communicates with PC via USB port, and it works with most of PC & notebook computers.Features It can support a wide range of ATMEL AVR microcontroller. It can works with AVR Studi...