All Products

SKU: AF-145

If you want to make a kit you'll need some solder. This 100g (about 1/4 lb) spool is just the right amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip' vials). 0.031" diameter, 60/40 'no clean' rosin core. Good for all through-hole soldering and some larger...

SKU: AF-734

A 100 g (1/4 lb) spool of SAC305 lead-free solder with no-clean rosin core flux. At 0.031" (0.8 mm) diameter, it's a versatile gauge suited to through-hole soldering and larger SMT work. The industry-standard SAC305 formulation is RoHS compliant, making it a reliable lead-free alternative to trad...

SKU: SF-TOL-09161

This is your basic spool of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder.Mix: 63% Sn / 37% Pb

SKU: AF-136

NOTE: THIS SOLDERING IRON IS HAS A US PLUG AND IS NOT COMPATIBLE WITH AUSTRALIAN POWER OUTLETS. Starting out on your electronics adventure?Want to wield the mighty soldering iron?Tired of saying "I'd totally get into electronics if I only knew what tools to get..."? Working with substandard eq...

SKU: SF-TOL-09325

This is your basic spool of lead free solder with a water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder. If you are just beginning to solder, we recommend you order the leaded solder...

SKU: AF-1930

A 50 g spool of lead-free SAC305 solder wire in a fine 0.5 mm (0.02″) diameter — ideal for both through-hole and SMT soldering work. The no-clean rosin core flux makes for clean joints without the need for post-solder cleaning. SAC305 is a widely used RoHS-compliant lead-free formulation, making...

SKU: AF-2473

A 50 g spool of lead-free solder wire ideal for through-hole and surface-mount soldering. With a 0.5 mm diameter and no-clean rosin flux core, this wire delivers clean, reliable joints without the need for post-solder cleaning. This Sn99.3/Cu0.7 formulation meets RoHS compliance standards, makin...

SKU: AF-3217

Does your prototyping project require soldering? Are you looking for something other than your usual run-o'-the-mill solder wire? Look no further! This high quality, low cost, adorably packaged Lead-Free Prototyping Solder Paste from IC Breakout will provide strong, flux-aided conductive bon...

SKU: SF-TOL-29534 · MPN: TOL-29534

This desoldering braid is a pre-fluxed copper wick for removing solder from joints, pads and accidental solder bridges. Place the braid over the solder, apply your soldering iron, and the activated flux plus the braided copper construction draws molten solder up through capillary action.It is han...

SKU: WS-31284 · MPN: 31282

Built around the ESP32-S3 dual-core processor, this industrial relay module brings local control, networking and edge automation into one DIN-rail friendly unit. It combines 8 relay outputs, 8 digital inputs, isolated CAN, Ethernet, Wi-Fi and Bluetooth for control panels, robotics, smart factorie...

SKU: SF-TOL-29532 · MPN: TOL-29532

This pre-fluxed copper desoldering braid is made for removing solder from joints, pads and small mistakes like solder bridges. Place it over the solder, heat it with your soldering iron, and the activated flux plus the braid’s capillary action draws molten solder into the wick.It is handy for rew...

SKU: SF-TOL-10243

We don’t want to hype this solder TOO much, but this could possibly be the best solder in the world. There, we’ve said it. This is a special blend made specifically for us and we love it. It all started as a quest to find the best solder to use in our production process and ended up being the bes...

SKU: SF-TOL-29531 · MPN: TOL-29531

This Techspray solder wick is a pre-fluxed copper desoldering braid for removing solder from PCB joints, pads and accidental solder bridges. It is a handy bench consumable for component replacement, PCB rework, repair and prototyping.To use it, place the wick over the solder joint and apply your ...

SKU: SF-TOL-10242

We don’t want to hype this solder TOO much, but this could possibly be the best solder in the world. There, we’ve said it. This is a special blend made specifically for us and we love it. It all started as a quest to find the best solder to use in our production process and ended up being the ...

SKU: SF-TOL-29533 · MPN: TOL-29533

This desoldering wick is a pre-fluxed copper braid for removing solder from joints, fixing excess solder, and cleaning up solder bridges. It is a handy bench consumable for rework, repairs, and swapping components on PCBs.To use it, place the braid over the solder joint and apply your soldering i...

SKU: SF-PRT-22461

A 10-way 3.5mm-pitch PCB terminal block paired with a matching rising clamp screw socket. Together they provide robust, solderless I/O and power connections for prototyping and production boards alike. The terminal block solders to your PCB at a 90° angle, while the rising clamp socket plugs in ...

SKU: AF-288

Perfect for bread-boarding, free wiring, etc. This spool of solid-core wire is easy to solder to. When bent it keeps its shape pretty well. We like to have a few spools of this stuff around. We suggest picking up wire strippers to match. Wire gauge is 22 AWG which we've found is the best all-arou...

SKU: AF-290

Perfect for bread-boarding, free wiring, etc. This spool of solid-core wire is easy to solder to. When bent it keeps its shape pretty well. We like to have a few spools of this stuff around. We suggest picking up wire strippers to match. Wire gauge is 22 AWG which we've found is the best all-arou...

SKU: DF-DFR1093-915 · MPN: DFR1093-915

Build a private LoRaWAN IoT network for home automation, environmental monitoring or maker projects without relying on an external cloud service. This indoor gateway includes a built-in SIoT local server and pre-installed Node-RED, so sensor data can be processed locally for dashboards, rules and...

SKU: AF-289

Perfect for bread-boarding, free wiring, etc. This spool of solid-core wire is easy to solder to. When bent it keeps its shape pretty well. We like to have a few spools of this stuff around. We suggest picking up wire strippers to match. Wire gauge is 22 AWG which we've found is the best all-a...