All Products

SKU: AF-4714

We use 2 pin JST PH connectors for all our battery packs, and if you want to put a board in series, like our LC709203F Stemma QT battery gauge, this cable will be very handy! Both ends have a JST PH 2mm pitch 2-pin plug. Between the two, 100mm of color coded wire - red for power, black for gro...

SKU: SF-PRT-25271 · MPN: PRT-25271

This compact 2-position JST-SH connector is a surface-mount part for adding a small cable connection to your PCB.It uses a right-angle layout, helping route the mating cable parallel to the board where vertical clearance is limited. The 1mm pitch suits tight electronics builds and compact maker p...

SKU: AF-4927

A slim, reliable 1.25 mm pitch cable with 7-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JST PH connectors are too bulky. This cable uses 1:N reversed wiring, meaning pi...

SKU: AF-4928

A slim, reliable 1.25 mm pitch cable with 8-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JST PH connectors are too bulky. This cable uses 1:N reversed wiring, meaning pi...

SKU: AF-4929

A slim, reliable 1.25 mm pitch cable with 9-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JST PH connectors are too bulky. This cable uses 1:N reversed wiring, meaning pi...

SKU: AF-4922

This 1.25 mm pitch 2-pin cable is a compact, Molex PicoBlade-compatible connector cable for projects where standard 0.1″ headers are too bulky. At 20 cm long, it provides a convenient connection length for internal wiring without excess slack. The friction-lock connectors provide a secure, click...

SKU: AF-4926

A slim, reliable 1.25mm pitch cable with 6-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JST PH connectors are too bulky. This cable uses 1:1 symmetric wiring, meaning pi...

SKU: AF-5400

The Adafruit ESP32 Feather V2 is a major redesign of the original HUZZAH32 ESP32 Feather, featuring 8 MB flash, 2 MB PSRAM, USB-C, a STEMMA QT port, a NeoPixel, and a user button. The dual-core ESP32 at 240 MHz provides Wi-Fi and Bluetooth Classic/LE connectivity for wireless and IoT projects. D...

SKU: AF-5900 · MPN: ADA5900

The Adafruit ESP32 Feather V2 with Headers is identical to the standard ESP32 Feather V2 but comes with pin headers pre-soldered, so you can plug it directly into a breadboard or socket straight away. Built around the dual-core ESP32 at 240 MHz with 8 MB flash and 2 MB PSRAM, it includes USB-C, L...

SKU: AF-3403

The Feather M0 Express is Adafruit's CircuitPython-optimised Feather, built around the ATSAMD21G18 ARM Cortex M0+ processor. It combines the standard Feather M0 platform with 2 MB of SPI flash storage, a Mini NeoPixel, and a UF2 bootloader for drag-and-drop programming — no special tools or drive...

SKU: AF-3010

The Feather M0 WiFi pairs the ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 Wi-Fi module for reliable 802.11b/g/n connectivity. The ATWINC1500 handles all Wi-Fi networking on a dedicated chip, freeing the main processor for your application code without the need to yield or share CPU ti...

SKU: AF-3857

The Feather M4 Express is built around the ATSAMD51J19, a 120 MHz Cortex M4 processor with hardware floating point and DSP instructions, 512 KB flash, and 192 KB RAM. It ships with CircuitPython pre-loaded — plug it in and it appears as a small USB drive with main.py ready to edit. No installs, I...

SKU: AF-4759

The Feather M4 CAN Express upgrades the popular Feather M4 platform with the ATSAME51J19 processor, which adds built-in CAN bus support. It features a 120 MHz Cortex M4 with hardware floating point and DSP instructions, 512 KB flash, 192 KB RAM, and an on-board CAN transceiver with 5V boost conve...

SKU: AF-4208

A 10-pack of JST SH 4-pin right-angle connectors with 1 mm pitch through-hole mounting tabs. These are the standard connectors used with the Qwiic and STEMMA QT ecosystems, making it easy to add I2C connectivity to your own PCB designs. The solid plastic housing accepts standard Qwiic cables, an...

SKU: AF-4328

A 10-pack of JST SH 4-pin vertical connectors with 1 mm pitch through-hole mounting tabs. These micro connectors are compatible with the Qwiic/STEMMA QT ecosystem, making them perfect for adding I²C connectivity to custom PCBs. The solid plastic housings feature through-hole pins that can also b...

SKU: AF-5722

The Adafruit High Density NeoPixel UV LED Strip packs 60 ultraviolet 5050-sized LEDs per metre onto a flexible PCB with weatherproof sheathing. Each LED contains three individual UV diodes controlled as a single NeoPixel, giving you addressable UV lighting that's compatible with any NeoPixel or W...

SKU: AF-306

These LED strips are fun and glowy. There are 32 RGB LEDs per meter, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 7-bit PWM precision (so 21-bit color pe...

SKU: SF-DEV-22925

The SparkFun ESP32-C6 Qwiic Pocket Development Board is designed to fit the 1in. x 1in. Qwiic Standard Size, making it easy to add a powerful wireless development platform that stacks into any existing project using the Qwiic ecosystem. It features the ESP32-C6 Mini-1 module from espressif™. We d...

SKU: SF-DEV-22924 · MPN: DEV-22924

The SparkFun ESP32-C6 Thing Plus is a compact, user-friendly device packed with advanced technology, designed to enhance your wireless projects like never before. It features the Espressif™ ESP32-C6 WROOM-1-N16 module at its core, which includes a RISC-V single-core processor, ample flash memory...

SKU: AF-5000

The Adafruit ESP32-S2 Feather brings Espressif's single-core ESP32-S2 to the Feather ecosystem with native USB, 2.4 GHz Wi-Fi, 4 MB flash, and 2 MB PSRAM. Native USB support means it can act as a keyboard, mouse, MIDI device, or disk drive — no separate USB-to-serial chip needed. This version in...