All Products

SKU: DF-SEN0257

The Gravity Analog Water Pressure Sensor measures water or gas pressure and outputs a linear 0.5–4.5 V analogue signal proportional to the applied pressure (0–1.6 MPa). Using the DFRobot Gravity 3-pin interface, it connects directly to Arduino and other 5 V microcontrollers for easy integration i...

SKU: DF-DFR1184 · MPN: DFR1184

The Gravity 0–10V ADC Module is a high-precision dual-channel analogue-to-digital converter designed to interface industrial-grade 0–10V sensors with microcontrollers and Linux-based systems. Built on the Texas Instruments ADS1115, it delivers 15-bit resolution (0.375 mV per step) with ±2 mV accu...

SKU: DF-SEN0678 · MPN: SEN0678

This Gravity air quality module uses Sensirion’s STCC4 gas sensing chip to directly measure carbon dioxide with the thermal conductivity measurement principle. It is designed for compact, cost-effective indoor monitoring nodes where stable CO₂ readings are needed without complex hardware integrat...

SKU: DF-DFR0646-G

An 8-digit green LED segment display module with I2C communication, part of the DFRobot Gravity sensor and module range. It provides a clear, bright numerical display with 16 levels of adjustable brightness, making it easy to show sensor readings, counters, clocks, and other numerical data in you...

SKU: DF-SEN0463

This Gravity Geiger Counter Module detects ionising radiation — including nuclear radiation, X-rays, and cosmic rays — using a large M4011 Geiger-Müller tube. When ionising particles pass through the tube, the module outputs a digital pulse that can be counted by any microcontroller to calculate ...

SKU: DF-SEN0134

The Gravity MQ-9 gas sensor detects carbon monoxide (CO) and combustible gases including methane and propane. It uses a semiconductor SnO2 sensing element that cycles between high and low temperatures — detecting CO at low temperature (1.5V) and combustible gases at high temperature (5.0V). With...

SKU: DF-SEN0470

A factory-calibrated electrochemical sulfur dioxide (SO2) sensor with I2C, UART, and analogue output modes. Part of the DFRobot Gravity gas sensor series, this module quickly and accurately measures SO2 concentration for industrial monitoring and environmental protection applications. The electr...

SKU: DF-DFR1036 · MPN: DFR1036

A 1-channel DAC module that converts a PWM signal from any microcontroller into a precise 0–5V or 0–10V analogue voltage output. Built around the GP8101S chip with 8-bit resolution and 0.2% accuracy, it's ideal for driving standard 0–10V or 0–5V controlled devices in automation projects — lights,...

SKU: DF-SEN0451 · MPN: SEN0451

This industrial Gravity kit measures electrical conductivity in aqueous solutions, helping you evaluate water quality by tracking dissolved content or salinity. It is suited to hydroponics, aquaculture and environmental water monitoring where long-running measurements are needed.The pro probe is ...

SKU: DF-DFR0999

The Gravity SCI DAQ Module is a multi-functional data acquisition module with a built-in 1.3-inch OLED screen for real-time sensor readings. It supports over 20 common sensor types including temperature, humidity, and barometric pressure — with automatic sensor recognition and a standardised I2C ...

SKU: DF-SEN0121

This is a steam(water)sensor from DFRobot. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up. Notice:The new version of analog sensor port pin mapping has been changed as the foll...

SKU: DF-SEN0204

A non-contact liquid level sensor that detects the presence of liquid through a container wall — no direct contact with the liquid required. Using advanced signal processing via the XKC-Y25-T12V chip, it works through most non-metallic containers including plastic, glass, and ceramic. This makes...

SKU: DF-SEN0130

The Gravity MQ5 gas sensor is highly sensitive to LPG, natural gas, and town gas, with lower sensitivity to alcohol, cooking fumes, and cigarette smoke. The analogue output is proportional to gas concentration, and sensitivity can be adjusted via the on-board potentiometer. Gravity interface for ...

SKU: DF-SEN0189

The Gravity Analog Turbidity Sensor measures water clarity by detecting the level of suspended particles. It works by measuring light transmittance and scattering rate, which change with the amount of total suspended solids (TSS) in the water. The sensor provides both analogue (0–4.5V) and digit...

SKU: DF-SEN0159

The Gravity CO2 Gas Sensor uses an MG-811 electrochemical sensing element to detect carbon dioxide concentration in the air. The output voltage decreases as CO2 concentration increases, and an onboard potentiometer lets you set a threshold for a digital on/off signal output. An onboard heating c...

SKU: DF-DFR0558

This Gravity I2C high-temperature sensor pairs a signal amplification module (MAX31855K) with a stainless steel sheathed K-type thermocouple probe for measuring temperatures up to 800 °C. The module converts the thermocouple's millivolt signal to a 14-bit digital reading over I²C, with cold-junct...

SKU: DF-SEN0205

A photoelectric liquid level sensor that uses optical principles to detect the presence or absence of liquid. With no moving parts, it requires minimal calibration and offers high sensitivity and long service life. The corrosion-resistant polycarbonate probe handles temperatures from −25 °C to 10...

SKU: DF-MBT0021-EN-18650-1 · MPN: MBT0021-EN-18650-1

This educational robot kit combines the micro:Maqueen Plus V2 18650 battery version with a Gravity: HUSKYLENS AI machine vision sensor. It is designed as a STEAM learning platform for primary and secondary students, classroom lessons, after-school projects and robot competitions.The Maqueen Plus ...

SKU: DF-KIT0176

The Gravity I2C 1 kg Weight Sensor Kit is a complete scale-building kit that includes a load cell, HX711 signal adapter board, acrylic mounting bracket, and all hardware needed to measure weight from 1 g to 1,000 g. The on-board MCU processes HX711 data and communicates via I²C, making it compati...

SKU: DF-SEN0239

A digital infrared proximity sensor with adjustable detection range from 0 to 200 cm. Outputs a simple digital signal — HIGH when an obstacle is detected, LOW when clear. The detection threshold is adjustable via a rear-mounted screw, making it easy to tune for different applications. Features t...