All Products
Showing 1-20 of 58 products · 2 unavailable products hidden
Gravity:Analog Grayscale Sensor For Arduino
Gravity: Analog Ambient Light Sensor TEMT6000
Gravity: Analog Turbidity Sensor For Arduino
Gravity: Arduino CO/Combustible Gas Sensor (MQ9)
Gravity: Linear / Analog Hall Effect Sensor with ±1200 GS Magnetic Field Range
MPN: DFR1132
Gravity: Analog Ambient Light Sensor For Arduino
Gravity: Arduino CO2 Gas Sensor
Gravity: Analog Infrared CO2 Sensor For Arduino (0~5000 ppm)
Gravity: Analog TDS Sensor/Meter for Arduino
Gravity: Arduino Gas Sensor (MQ2)
Gravity: 9 Pcs Sensor Set for Arduino
Gravity: I2C ADS1115 16-Bit ADC Module (Arduino Raspberry Pi Compatible)
Gravity: Arduino Heart Rate Monitor Sensor (ECG)
Gravity: Arduino Propane Gas Sensor (MQ6)
DFRobot Gravity Industrial Analog EC Meter Kit (K=1, IP68)
MPN: SEN0451
Gravity: Arduino Analog Flame Sensor
Smart Grayscale Sensor
Gravity: I2C 16x2 Arduino LCD with RGB Font Display (Black)
Gravity:Analog Rotation Sensor V1
Gravity: Starter Kit for Arduino
Gravity:Analog Grayscale Sensor For Arduino
The Gravity Analogue Grayscale Sensor measures reflected light intensity, outputting an analogue value that ranges from black (low) to white (high). It uses a photocell paired with an integrated white LED to illuminate the surface being measured, making it effective for detecting surface brightne...
Gravity: Analog Ambient Light Sensor TEMT6000
An analog ambient light sensor based on the TEMT6000 detector, which has a spectral response closely matching the human eye with very low IR sensitivity. It outputs an analog voltage proportional to the ambient light level, making it easy to read with any Arduino or microcontroller analog input. ...
Gravity: Analog Turbidity Sensor For Arduino
The Gravity Analog Turbidity Sensor measures water clarity by detecting the level of suspended particles. It works by measuring light transmittance and scattering rate, which change with the amount of total suspended solids (TSS) in the water. The sensor provides both analogue (0–4.5V) and digit...
Gravity: Arduino CO/Combustible Gas Sensor (MQ9)
The Gravity MQ-9 gas sensor detects carbon monoxide (CO) and combustible gases including methane and propane. It uses a semiconductor SnO2 sensing element that cycles between high and low temperatures — detecting CO at low temperature (1.5V) and combustible gases at high temperature (5.0V). With...
Gravity: Linear / Analog Hall Effect Sensor with ±1200 GS Magnetic Field Range
· MPN: DFR1132
##Introduction Gravity: Linear/Analog Hall Sensor is a high-precision device designed for measuring and monitoring magnetic field strength. Advanced Hall effect circuitry at the core converts magnetic induction strength directly into a voltage output. The sensor responds uniquely to magnetic fiel...
Gravity: Analog Ambient Light Sensor For Arduino
Here comes DFRobot's new Analog Ambient Light Sensor for Arduino or Raspberry Pi. Brand new design and much more convenient to use. This sensor help you to detect the light density and reflect the analog voltage signal back to Arduino controller. You can set the threshold of voltage level to ...
Gravity: Arduino CO2 Gas Sensor
The Gravity CO2 Gas Sensor uses an MG-811 electrochemical sensing element to detect carbon dioxide concentration in the air. The output voltage decreases as CO2 concentration increases, and an onboard potentiometer lets you set a threshold for a digital on/off signal output. An onboard heating c...
Gravity: Analog Infrared CO2 Sensor For Arduino (0~5000 ppm)
The concentration of carbon dioxide (0.03% usuallly) is related to daily life. Recently, there's a study showing that the atmospheric CO2 content has reached 0.0385% (385 ppm) which is the highest value since 2.1 million years. The raise of atmospheric CO2 content to some extent results in gl...
Gravity: Analog TDS Sensor/Meter for Arduino
The Gravity Analog TDS Sensor is an Arduino-compatible kit for measuring Total Dissolved Solids (TDS) in water. TDS indicates how many milligrams of soluble solids are dissolved per litre — the higher the value, the less clean the water. This sensor outputs a 0–2.3V analog signal that can be read...
Gravity: Arduino Gas Sensor (MQ2)
INTRODUCTION This is a generic Arduino gas sensor. It has MQ2 probe which is able to detect LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke.It can be used in gas leakage detecting device in consumer and industry markets. It has a high sensitivity and fast response time. ...
Gravity: 9 Pcs Sensor Set for Arduino
This is DFRobot's basic sensor set for arduino. Set includes light sensor, touch sensor, temperature sensor, magnetic sensor, vibration sensor, tilt sensor, big button, LED lighting module and Grayscale sensor. To connect these sensors to Arduino, we suggest to use our IO expansion shield...
Gravity: I2C ADS1115 16-Bit ADC Module (Arduino Raspberry Pi Compatible)
DFRobot I2C ADS1115 16-bit ADC module can accurately collect and convert analog signals. Through this ADC module, Raspberry Pi can easily use a wide range of Gravity series analog sensors to measure various signals, and perceive this world.Raspberry Pi is a common master control board which is...
Gravity: Arduino Heart Rate Monitor Sensor (ECG)
The DFRobot Gravity Heart Rate Monitor Sensor measures the electrical activity of the heart and outputs it as an analog signal. Built around the AD8232 chip, it filters and amplifies the ECG signal to produce a clean waveform from the PR and QT intervals — viewable in real time using the Arduino ...
Gravity: Arduino Propane Gas Sensor (MQ6)
INTRODUCTION This is an Arduino Propane Gas Sensor. It uses MQ6 probe to detect iso-butane, propane and liquefied petroleum gas (LPG). It is less sensitive with alcohol, cooking fumes and cigarette smoke. It can be used in gas leakage detecting equipment in...
DFRobot Gravity Industrial Analog EC Meter Kit (K=1, IP68)
· MPN: SEN0451
This industrial Gravity kit measures electrical conductivity in aqueous solutions, helping you evaluate water quality by tracking dissolved content or salinity. It is suited to hydroponics, aquaculture and environmental water monitoring where long-running measurements are needed.The pro probe is ...
Gravity: Arduino Analog Flame Sensor
This Gravity analog flame sensor detects fire and infrared light sources in the 760–1,100 nm wavelength range. With a 60° detection angle and analogue output proportional to flame distance, it's widely used in firefighting robots, fire alarm projects, and other safety applications. The Gravity i...
Smart Grayscale Sensor
This time we reinvented the line-tracking sensor. Beyond recognizing two specific colors or output through digital or analog only, the Smart Gray Sensor has integrated both digital and analog output features. In digital mode, user can have two color data recorded through simple button operat...
Gravity: I2C 16x2 Arduino LCD with RGB Font Display (Black)
The Gravity I2C 16×2 LCD features RGB font colours on a black background, allowing you to display text in any of 16 million colour combinations. Using the Gravity I2C interface, only two data lines are needed for both communication and backlight control. The display supports 2 rows of 16 charact...
Gravity:Analog Rotation Sensor V1
A 300° analog rotation potentiometer sensor with a Gravity interface for plug-and-play connection to Arduino and other microcontrollers. Rotate the knob to output a variable analog voltage — useful for position-dependent interactions, MIDI instruments, LED brightness control, and more. The senso...
Gravity: Starter Kit for Arduino
The Gravity Starter Kit for Arduino is a plug-and-play electronics toolkit designed for beginners and makers getting started with the Arduino platform. It includes a DFRduino UNO R3 microcontroller (fully compatible with Arduino UNO) along with 12 popular sensors and components from DFRobot's Gra...
