All Products
Showing 1-20 of 74 products · 26 unavailable products hidden
Dual Phono Connector for pHAT DAC
A dual RCA phono connector designed to pair with the Pimoroni pHAT DAC for Raspberry Pi. Simply place it into the landing pads on the PCB and solder for a clean analogue audio output. Key Features Colour-Coded Channels – Red (right) and white (left) for easy identification Through-Hole Termin...
Gravity: I2C 12-Bit DAC Module
The DFRobot Gravity 12-Bit I2C DAC Module is a compact digital-to-analogue converter based on the MCP4725 chip. It accurately converts digital values to precise analogue voltage signals, providing far cleaner output than PWM-based approaches from microcontrollers. With on-board EEPROM, the modul...
GNSS Flex pHAT with DAN-F10N Dual-Band GNSS Module
·
Add dual-band GNSS positioning to a Raspberry Pi or similar single-board computer with this SparkPNT GNSS Flex pHAT and DAN-F10N module combination. It pairs a GNSS Flex pHAT carrier with a u-blox DAN-F10N GNSS Flex Module for metre-level L1/L5 positioning in a compact, swappable format.The pHAT ...
GNSS Flex pHAT with LG580P RTK Heading Module
·
Add precise position and orientation data to a Raspberry Pi with this GNSS Flex pHAT and LG580P module combination. It is built for advanced navigation projects that need centimetre-level RTK positioning plus real-time heading data, such as intelligent robots, precision agriculture systems and au...
SparkPNT GNSS Flex Module with mosaic-G5 P3
·
This GNSS Flex module brings Septentrio's compact mosaic-G5 P3 receiver to the SparkPNT Flex ecosystem, giving advanced navigation projects high-precision positioning in a small, low-power format.It is designed for autonomous systems, robotics and portable surveying tools where size, weight and p...
SparkPNT GNSS Flex Module - ZED-X20P
·
Build high-precision positioning into your GNSS Flex setup with this swappable ZED-X20P module. It uses the u-blox X20 engine, the successor to the F9 generation, for demanding navigation, control, robotics and vehicle applications.The module connects to a GNSS Flex pHAT carrier board via standar...
SparkPNT GNSS Flex Module - LG290P & IM19 IMU
·
This SparkPNT Flex board combines Quectel's LG290P quad-band RTK GNSS receiver with the Feyman (FMI) IM19 IMU, providing centimetre-level positioning with tilt compensation and anti-jamming performance for demanding navigation and surveying projects.It is part of the SparkPNT GNSS Flex system, de...
Adafruit Matrix Portal S3 CircuitPython Powered Internet Display
The Adafruit Matrix Portal S3 is the next-generation plug-and-play controller for HUB-75 RGB LED matrix panels. Powered by the ESP32-S3 with built-in WiFi and Bluetooth LE, it plugs directly into the back of any compatible matrix — no soldering or wiring required. Just attach power and start codi...
SparkFun Auto pHAT for Raspberry Pi
The SparkFun Auto pHAT is an all-in-one robotics add-on for the Raspberry Pi. It drives up to two DC motors (with optional encoder support) and four servo motors, all controlled over I2C — leaving your Pi's GPIO pins free for other uses. A Qwiic connector is included for easy expansion. The boar...
SparkPNT GNSS Flex Module - ZED-X20P & IM19 IMU
·
This GNSS Flex board combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU, giving compatible carrier boards centimetre-level positioning plus compensated attitude data for demanding navigation and surveying projects.It is designed for the SparkPNT GNSS Flex ecosystem, with...
Realtek Ameba-RTL8195AM WiFi NFC Module wireless remote control/ telecontrol: Gravity: 315MHz RF Receiver Module
The Realtek Ameba RTL8195AM is an IoT microcontroller module that combines a 32-bit ARM Cortex-M3 MCU (166 MHz) with Wi-Fi 802.11 b/g/n and NFC (Near Field Communication) on a single chip. It supports Arduino and MicroPython programming, making it accessible for rapid IoT prototyping and developm...
Adafruit Feather M4 Express - Featuring ATSAMD51 - ATSAMD51 Cortex M4
·
The Feather M4 Express is built around the ATSAMD51J19, a 120 MHz Cortex M4 processor with hardware floating point and DSP instructions, 512 KB flash, and 192 KB RAM. It ships with CircuitPython pre-loaded — plug it in and it appears as a small USB drive with main.py ready to edit. No installs, I...
FireBeetle 2 ESP32-UE (N16R2) IoT Microcontroller (16MB Fl., 2MB PS., Supports Ext Antenna, Wi-Fi & Bluetooth)
FireBeetle 2 ESP32-UE (N16R2) is a powerful IoT microcontroller that supports external Bluetooth & WiFi antennas and features 16M Flash and 2M PSRAM. This product enhances memory capacity and operating space, enabling superior performance for applications such as the LVGL graphics library for int...
ESP32-S3 1.8" Display Dev Board with Knob – Touch, Wi-Fi/Bluetooth, Metal Case and battery
·
This product is a high-performance, highly integrated MCU board designed by Waveshare, features ESP32-S3 and ESP32 dual MCUs control, integrated large-capacity Flash and PSRAM. Onboard 1.8inch touch LCD screen and multiple peripherals such as audio decoder chip and knob encoder, enabling rapid de...
SparkPNT DAN-F10N GNSS Flex Module
·
Add modular GNSS positioning to a Raspberry Pi or similar single-board computer with this compact SparkPNT GNSS Flex receiver module. It is built around the u-blox DAN-F10N and is designed for reliable metre-level positioning, including challenging urban environments.The module fits the SparkPNT ...
DA7212 I2S Audio Board For Raspberry Pi, Stereo Encoding/Decoding, Onboard Dual Microphones
DA7212 I2S Audio Boardfor Raspberry Pi Supports stereo encoding/decoding and rich audio processing functions Designed for the Raspberry Pi 40-pin GPIO header, this module is fully compatible with Raspberry Pi series boards. It features the high-quality DA7212 stereo DAC, controlled via I2C, with ...
SparkPNT GNSS Flex Module - LG580P
·
Add precise positioning and orientation to a GNSS Flex carrier with this LG580P-based module. It is built for high-performance navigation, combining centimetre-level RTK positioning with real-time heading data for robotics, precision agriculture and autonomous vehicle projects.The module is part ...
Adafruit Feather M4 CAN Express with ATSAME51
·
The Feather M4 CAN Express upgrades the popular Feather M4 platform with the ATSAME51J19 processor, which adds built-in CAN bus support. It features a 120 MHz Cortex M4 with hardware floating point and DSP instructions, 512 KB flash, 192 KB RAM, and an on-board CAN transceiver with 5V boost conve...
FireBeetle 2 ESP32-E (N16R2) IoT Microcontroller (16M / 2M, Supports Wi-Fi & Bluetooth)
·
##Introduction The FireBeetle 2 ESP32-E (N16R2) IoT development board equipped with 16M Flash and 2M PSRAM. It is designed to provide superior performance for applications such as the LVGL graphics library for interface design and interaction. Built on the foundation of Espressif's ESP32-WROOM-32...
Terminal Block Board for Raspberry Pi Pico
A terminal block expansion board for the Raspberry Pi Pico, designed for makers who prefer screw-terminal connections over soldering or breadboard wiring. Every Pico pin is broken out to a labelled terminal block, providing stable and reliable connections for prototyping and permanent installatio...
