All Products
Showing 1-20 of 51 products · 9 unavailable products hidden
DSS-P05 Standard Servo (5kg)
The DSS-P05 is a standard-size servo with up to 4.2 kg·cm of torque at 6V, suitable for robot heads, arms, biped robots, and other projects requiring reliable 180° rotation. Specifications Voltage – 4.8–6.0V Torque – 3.5 kg·cm (4.8V) / 4.2 kg·cm (6.0V) Speed – 0.17 sec/60° (4.8V) / 0.12 sec/...
DFRobot SEN0704 6x6 Flexible Tactile Pressure Sensor - UART
·
This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-time pressure distribution mapping instead of a single force reading.The bendable ...
REV Robotics Smart Robot Servo
·
This configurable metal-geared servo can be used as a standard angular servo, a custom-limit angular servo, or a continuous-rotation actuator. It accepts conventional PWM input, so it can drop into many robotics builds while adding useful reconfiguration options when used with the optional REV SR...
Servo - Generic, 180° Rotation (Sub-Micro Size)
·
Here is a simple, low-cost servo for all your mechatronic needs. This little guy is able to take in 6 volts and deliver 1.5kg/cm (at 6V). of maximum torque at 0.09 sec/60° (at 6V). This small servo comes with a standard 3 pin power and control cable, six arms and six screws. Note: This is the s...
Servo - Generic High Torque (Standard Size)
A reliable, high-torque standard-size servo (FS5106B) with dual ball bearings and nylon gears. Delivering up to 83.47 oz-in of torque at 6V with a speed of 0.16 sec/60°, it's a versatile choice for robotics, RC, and mechatronics projects. Features a standard 3-pin power and control cable with 18...
2.3KG Serial Bus Servo (6V)
A miniature serial bus servo from DFRobot that delivers 2.3 kg·cm of stall torque at 6 V, controllable via TTL serial communication. Up to 253 servos can be daisy-chained in series, each assigned a unique ID for individual or synchronised control at baud rates up to 1 Mbps. The hybrid gear train...
DF05BB Tilt/Pan Kit (5kg)
A pan-and-tilt servo assembly for horizontal surface mounting, built with two DFRobot DF05BB ball-bearing servos and aluminium brackets. Ideal for camera gimbals, sensor heads, and small remote-controlled robot platforms. Key Features Two-Axis Movement – Pan and tilt via dual servo motors DF0...
Cherokey:4WD Basic Arduino Robot Building Kit
The Cherokey 4WD Basic Arduino Robot Kit is a perfect wheeled robot platform to build your own robot and to get started with Arduino Robot. With just a few simple steps of assembling the hardware and tuning the software, and you'll learn all about Arduino, robotics, sensors, bluetooth comm...
Standard Nylon Gear Servo For Remote Control Model
High impact plastic is designed to withstand minor crashes and the effects of model fuelThrough-the-hole Circuit Board Plating - Eliminates the need for wires or leadsHeavy Duty Output Shaft - Designed not to break, and offers versatility when installing the servo hornNylon gearsSpecifications...
9g 270°Metal Servo with Analog Feedback (1.5kg)
A 9g micro servo with an extended 270° rotation range, metal gears, and built-in analog feedback (0–3.3V). The wider rotation range makes it suitable for applications requiring more travel than a standard 180° servo, while the analog feedback signal enables closed-loop position control via an MCU...
Micro Servo - High Powered, High Torque Metal Gear
·
This high-powered micro servo packs nearly double the stall torque of standard micro servos into a compact metal-geared package. With approximately 180° of rotation, it works with any standard servo library, driver, or controller — including the Arduino Servo library, motor shields, and 16-channe...
6 DOF 25KG Digital Servo Educational Desktop Robotic Arm V2
A fully assembled 6 degrees-of-freedom desktop robotic arm powered by six high-torque 25 kg·cm digital servo motors. The V2 version arrives pre-assembled and factory-calibrated, so you can start programming and experimenting straight away. Built from brushed aluminium alloy with metal ball beari...
Servo - Generic High Torque Continuous Rotation (Standard Size)
Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-pin power and control cable is attached and all hardware listed below is included...
9g 180° Metal Servo with Analog Feedback (1.5kg)
A 9g micro servo with 180° rotation, metal gears, and built-in analog feedback (0–3.3V). The analog feedback signal allows connection to an MCU for closed-loop position control, providing more precise operation than standard open-loop servos. The compact 22.9 × 12.2 × 32.5mm body fits into tight...
Servo - Generic (Sub-Micro Size)
Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10 sec/60° This small servo comes with a standard 3 ...
Analog Feedback Micro Servo - Plastic Gear
·
A plastic-geared micro servo with an extra trick — a fourth wire brings out the internal potentiometer feedback signal, letting you read the servo's actual position via an analog input. This feedback capability enables motion recording, playback, and improved stability in robotics applications. ...
2.5g 360 degree Micro Servo (0.45kg)
An ultra-compact 2.5g micro servo with 360-degree continuous rotation, ideal for micro robots and space-constrained projects. The coreless motor and POM gears deliver smooth, reliable rotation in a tiny form factor measuring just 19.6 × 8.0 × 16.3mm. Controlled via standard PWM servo signals, it...
Bulk 9 Gram Servo - 10 pack
A bulk pack of ten 9-gram micro servos — an affordable way to stock up for robotics, mechatronics, and RC projects. Each servo includes a ~25cm cable with a standard 3-pin female header, plus a full set of horn and screw accessories. These compact servos deliver 1.6 kg/cm of torque at 6.0V with ...
DF15RMG Tilt Kit (20kg)
This is a most powerful standard servo motor from DFRobot so far. A servomotor is a rotary actuator that allows precise control of angular position. This is specifically designed for the robotics application which requires high quality in a variety of the servo features. The DF15RMG stan...
Metal DC Geared Motor - 6V 133RPM 4.5kg.cm
This metal DC geared motor features a 45:1 metal gear reducer in a compact form factor, delivering up to 4.5 kg·cm of stall torque at 133 RPM. The all-metal gearbox provides durability and reliability for robotics, drive systems, and mechanical projects. The motor operates on 2–7.5 V (rated 6 V)...
