All Products

SKU: AF-520

A compact hard-covered booklet designed for organising and storing SMT component tapes. The translucent flip pages make it easy to identify parts at a glance, and the flexible material lets you slide tape strips in and out with ease. Write on the slots with a marker to label your tiny components....

SKU: AF-2184

These five blank pages are designed for keeping taped parts, specifically for 24mm or smaller tape. Each page has 6 rows or slots that you can slide your tape into. The slots are 3.5" long. These pages are meant for our Blank SMT Storage Book. We also carry pages for 8mm tape. ...

SKU: AF-430

These modular snap boxes are perfect for organising small SMD/SMT components and ICs. Made from anti-static black plastic, they protect ESD-sensitive parts while keeping them visible through the individual clear pop-open lids — only open the compartments you need, reducing the risk of mix-ups or ...

SKU: AF-442

Always have the right SMT components at your hand with this awesome 0603 Resistor and Capacitor book set! This book has nice translucent pages filled with cut tape 0603 SMT components, sorted, labeled and ready to go. This book has 63 5% resistor values, 3025 parts and 17 capacitor values, 700 pa...

SKU: AF-3960

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft!  This Conductive Nylon tape goes great with our other interesting materials, such as copper tape, ITO glass or plastic, conductive inks, etc. We found that the metallic nylon fabric ha...

SKU: AF-1211

The Adafruit SMT Breakout PCB for 12-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 12-pin TSSOP footprint while the other supports 12-pin SOIC (narrow, medium, or wide), with traces routed to two rows of 0...

SKU: SF-TOL-25575 · MPN: TOL-25575

Self-fusing silicone electrical tape is the perfect way to insulate and protect your freshly-soldered splice.These tape strips stretch several times their own length to tightly wrap and conform to soldered joints, then securely bonds with themselves without any sticky gooey adhesives. The wrapped...

SKU: AF-3961

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft!  This Conductive Nylon tape goes great with our other interesting materials, such as copper tape, ITO glass or plastic, conductive inks, etc. We found that the metallic nylon fabric ha...

SKU: SF-COM-18076

The GD25Q40C is a 4 Mbit (512 KB) serial flash memory chip supporting standard, dual, and quad SPI interfaces. With clock speeds up to 120 MHz and quad I/O transfer rates reaching 480 Mbits/s, it provides fast non-volatile storage for embedded systems and microcontroller projects. Featuring 100,...

SKU: AF-1043

A compact aluminium heat sink from Cool Innovations, designed for surface-mount components such as SoCs, motor drivers, and other SMT packages. Trusted by engineers for its low cost, ease of use, and excellent thermal performance in a tiny footprint. The heat sink features four round fins for in...

SKU: AF-1208

The Adafruit SMT Breakout PCB for 28-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 28-pin TSSOP footprint while the other supports 28-pin SOIC (narrow, medium, or wide), with traces routed to two rows of 0...

SKU: AF-1207

The Adafruit SMT Breakout PCB for 16-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 16-pin TSSOP footprint while the other supports 16-pin SOIC (narrow, medium, or wide), with traces routed to two rows of 0...

SKU: AF-1206

The Adafruit SMT Breakout PCB for 20-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 20-pin TSSOP footprint while the other supports 20-pin SOIC (narrow, medium, or wide), with traces routed to two rows of 0...

SKU: AF-1515

A 10-pack of ultra-low-profile aluminium heat sinks designed for surface-mount components such as SoCs, motor drivers, linear regulators, FETs, and other SMT packages. Their tiny footprint and minimal height make them perfect for tight enclosures where every millimetre counts. Each heat sink fea...

SKU: DF-DFR1146 · MPN: DFR1146

##Introduction LattePanda Mu is a micro x86 compute module featuring Intel N100 quad-core processor, 8GB LPDDR5 memory and 64GB storage. LattePanda Mu exposes extensive pins, including 3 HDMI/DisplayPort, 8 USB 2.0, up to 4 USB 3.2, and up to 9 PCIe 3.0 lanes. These flexible ports and open-source...

SKU: AF-1493

A compact aluminium heat sink designed for surface-mount components such as SoCs, motor drivers, linear regulators, FETs, and other SMT packages. Its small footprint and tall fin design provide effective thermal dissipation where space is tight. The heat sink features three tall fins for increas...

SKU: PR-PIM582

Swathe everything in rainbows with this all-in-one, USB-C powered controller for WS2812/Neopixel and APA102/Dotstar addressable LED strip. Plasma 2040 is a RP2040-based driver board for addressable LED strip (also known as magical rainbows by the metre). It's designed to make rigging up bits ...

SKU: SF-COM-12877

We know this looks like a lot of our other LEDs, but it’s not! This is a PTH Addressable RGB LED with a WS2812 control IC built right into the LED. This PTH version is incredibly similar to its SMD cousin, except it is a lot simpler to solder into your project and is in a diffused 8mm package. Th...

SKU: AF-448

A 12V EL (electroluminescent) wire and tape inverter for fixed installations and larger EL projects. Unlike pocket-sized 2×AA inverters, this brick-style inverter runs from a 12V DC input — connect it to a wall adapter for permanent setups, or use a larger battery pack (such as 8×AA) for extended...

SKU: AF-16

A blank metal tin in the classic Altoids gum size — perfect for housing small electronics projects. Custom-made with a flattened bottom (instead of rounded) so components sit flush inside. Ideal for building portable USB chargers, MintyBoosts, and other compact builds. Specifications Outside D...