All Products

SKU: SF-DEV-11235

The Arduino and Breadboard Holder is a sturdy plastic base plate that keeps your Arduino and breadboard neatly organised during prototyping. The board mounts with two included screws using the standard Arduino mounting holes, giving a solid and simple connection — no plastic clips required. Comp...

SKU: DF-FIT0008-G

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield. Strong self-adhesive backing. Measures 1.8"x1.4".You also have choices of different colors. SPECIFICATIONS 170 tie point breadboard 17 x 5 x 2 points Adhesi...

SKU: AF-3859

A 4×AA battery holder with premium jumper header wires that plug directly into a breadboard. No stripping or soldering required — just insert the header pins into your breadboard rails and start prototyping with portable battery power. Delivers approximately 4.8V with NiMH rechargeable batteries...

SKU: DF-FIT0008-BE

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield. Strong self-adhesive backing. Measures 1.8"x1.4".You also have choices for different colors. SPECIFICATIONS 170 tie point breadboard 17 x 5 x 2 points Adhes...

SKU: SF-KIT-21301

A note for SparkFun Inventor's Kit v4.1 users: The only change that was made from the SIK v4.1 to the SIK v4.1.2 is our new carrying case. All of the internal parts and instructional guide have remained the same! The SparkFun Inventor's Kit (SIK) is a great way to get started with programmi...

SKU: AF-65

A tiny solderless breadboard that's half the size of a half-size breadboard — perfect for compact prototypes, small circuits, and sticking onto the top of Arduino protoshields. Specifications Dimensions – 46 × 36 mm (1.8" × 1.4") Type – Solderless breadboard Ideal For Compact prototyping a...

SKU: DF-FIT0908

This kit includes two kinds of mini multi-color block building breadboards and 2 base plates of different sizes. Users can freely assemble these breadboards to make various projects combining with other microcontrollers like Arduino, Raspberry Pi, etc., or use them in circuit assembly and test in...

SKU: AF-248

A 6×AA battery holder with a 5.5mm/2.1mm DC barrel plug, ready to power Arduino boards and other electronics with a standard DC jack. Use alkaline AAs for approximately 9V at 3000–4000mAh, or rechargeable NiMH cells for 7.2V at ~2000mAh. The 9V alkaline output is ideal for boards with a 5V volta...

SKU: AF-875

This 8×AA battery holder provides a portable power source with a built-in on/off switch and a standard 5.5 mm / 2.1 mm DC barrel plug for easy connection to Arduino boards, LED strips, motors, and other 12V devices. Use alkaline AAs for approximately 12V at 3000–4000 mAh, or rechargeable NiMH cel...

SKU: AF-64

This is a cute half size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to make the breadboard as thin as 1.4" (3.5cm) and stick it onto an Arduino protos...

SKU: DF-FIT0141

A 6×AA battery holder with a DC 2.1mm power jack that plugs directly into an Arduino's barrel jack input. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Features mounting holes for secure installation. Specifications Cell Quantity: 6× AA Output...

SKU: EC-MCA03328A

The Crowduino Nano V3.1 is a compact, breadboard-friendly development board based on the ATmega328, fully compatible with the Arduino Nano 3.0 and its shields. It features a Mini-B USB port for programming and serial communication, 14 digital I/O pins (6 with PWM), and 8 analogue inputs. Power i...

SKU: AF-3456

This 5×AA battery holder delivers approximately 7.5V from five AA batteries, terminated with a 2.1mm DC barrel plug (centre positive). It provides the ideal voltage for Arduino boards and other development boards with onboard 5V regulators, which typically need 1–2V of headroom above their output...

SKU: AF-1870

A simple sewable breakout board with a CR2032 coin cell battery holder pre-soldered on and 0.1" pitch breakout pins for easy connection. Ideal for powering very low-current projects or adding a battery backup circuit to a real-time clock or similar module. Key Features CR2032 Coin Cell Holder ...

SKU: AF-3842

A compact battery holder for three AA cells with an integrated power cable and DC barrel jack. The series configuration delivers approximately 3.6–4.5V depending on battery chemistry, making it a convenient power source for 3.3V microcontroller projects and portable electronics. The 200mm power ...

SKU: DF-FIT0104

A pack of ten 8-pin female headers with standard 2.54 mm pitch, designed for use with Arduino boards. These headers are ideal for replacing damaged headers, building custom shields, or prototyping on breadboards and perfboard. Key Features 8-Pin Configuration – Standard Arduino-compatible fema...

SKU: SF-PRT-10512

A snap-in 9V battery holder with a 5.5mm/2.1mm centre-positive barrel jack connector. The battery clicks securely into place, and three mounting holes allow you to attach the holder to an enclosure or chassis. Key Features Snap-In Design – Battery clicks securely into place 5.5mm/2.1mm Barrel...

SKU: DF-FIT0610

This enclosed battery holder takes 3× AA batteries in series, providing approximately 4.5V from alkaline cells or 3.6V from NiMH/NiCd rechargeables. It features a built-in on/off switch and a sliding, removable cover for easy battery access. Compatible with both non-rechargeable alkaline and rec...

SKU: AF-3242

The Feather 32u4 Bluefruit LE with Stacking Headers combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging — with stacking headers pre-soldered so you can plug into a breadboard and stack FeatherWings on top. The Bluefruit module is...

SKU: LB-LR0296

A 9V battery clip adapter with a standard 5.5 × 2.1 mm centre-positive barrel jack. Use it to power any device that accepts 9V input through an onboard barrel jack connector. Key Features 9V Battery Snap – Standard clip fits all 9V batteries Barrel Jack Output – 5.5 × 2.1 mm centre-positive c...