All Products

SKU: AF-2880

This matching cable set includes one 2-pin JST SM plug and one 2-pin JST SM receptacle, each with 16cm leads. The latching connectors provide a solid, compact connection that won't come apart easily, and the polarised design prevents backwards insertion. These cables are compatible with EL wire ...

SKU: SF-CAB-14574

These 2-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection. Even if you don’t have a specific use for these pigtail connectors now, it’s good to have them handy when you need them! E...

SKU: AF-5722

The Adafruit High Density NeoPixel UV LED Strip packs 60 ultraviolet 5050-sized LEDs per metre onto a flexible PCB with weatherproof sheathing. Each LED contains three individual UV diodes controlled as a single NeoPixel, giving you addressable UV lighting that's compatible with any NeoPixel or W...

SKU: AF-4872

A matching pair of 2-pin JST XH-compatible cables — one with an inline plug and one with an inline socket — for easy connect-and-disconnect wiring. The 2.5mm pitch connectors friction-lock together for a secure, reliable connection that's easy to separate when needed. Each cable is 20cm long wit...

SKU: AF-616

Give yourself some more room with an EL wire cable extender. This cable has a 2-pin JST SM plug on one end and receptacle on the other. Use it to extend the reach of EL wire, panel, tape, etc. The cable is a meter long, you can of course snap more together if necessary, or cut and re-solder it...

SKU: SF-PRT-14998

A short adapter cable with a JST-PH male connector on one end and a JST-SM male connector on the other. Use it to bridge between devices with different JST connector types, including EL wire and panel products. Key Features Connectors – JST-PH male to JST-SM male Length – 100mm Voltage Ratin...

SKU: DF-FIT0975 · MPN: FIT0975

##Introduction This power cord is specially designed for LattePanda Sigma users and can provide stable power supply to Sigma. One end of the cable adopts an ATX-24Pin chassis power connector for connecting to the chassis power ATX interface; the other end connects to 2 sets of 12V power interface...

SKU: SF-PRT-09914

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST. Dimensions: 6" length Documents: JST connector Datasheet Illumitu...

SKU: AF-3851

Roll out the black light! The Adafruit NeoPixel UV LED Strip packs 32 individually addressable ultraviolet LEDs per metre onto a flexible white PCB with a weatherproof sheathing. Each LED package contains three UV diodes controlled via the standard NeoPixel (WS2812) protocol — just set all three ...

SKU: AF-1905

The Adafruit Mini Lipo with Mini-B USB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Mini USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: AF-4423

Totaling 560 pieces, this JST-XH Connector Kit is a must-have for your workstation. You'll have enough sockets and headers to fuel your maker tendencies for days on end!These connectors are really common in electronics, we use the 2 pin ones for our arcade quick-connects. Sinc...

SKU: AF-4410

The Adafruit Micro-Lipo Charger is a tiny, easy-to-use charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Simply plug a USB-C cable into any USB power source and connect your battery via the JST connector — two LEDs show charging status at a glance (red = ch...

SKU: AF-4875

A matching pair of 5-pin JST XH-compatible cables — one with an inline plug and one with an inline socket — for easy connect-and-disconnect wiring. The 2.5mm pitch connectors friction-lock together for a secure, reliable connection that's easy to separate when needed. Each cable is 20cm long wit...

SKU: AF-4873

A matching pair of 3-pin JST XH-compatible cables — one with an inline plug and one with an inline socket — for easy connect-and-disconnect wiring. The 2.5mm pitch connectors friction-lock together for a secure, reliable connection that's easy to separate when needed. Each cable is 20cm long wit...

SKU: AF-261

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers! We have the socket 'mating' version of this cable over here, as well as an 'extension' cable that has one of each soldered together. If you want a switch in t...

SKU: AF-1548

Digitally-controllable RGB LED pixel bars using WS2801 driver chips. Each 75mm plastic PVC bar contains 3× 5050 RGB LEDs and a controller chip, epoxy-flooded for waterproof outdoor use. Sold as a strand of 21 pixels — ideal for building large RGB 7-segment displays. The pixels connect via a 4-co...

SKU: AF-4874

A matching pair of 4-pin JST XH-compatible cables — one with an inline plug and one with an inline socket — for easy connect-and-disconnect wiring. The 2.5mm pitch connectors friction-lock together for a secure, reliable connection that's easy to separate when needed. Each cable is 20cm long wit...

SKU: PL-1906

These 1×7-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable seven-wire connections in a single inline housing. Compatible with male and female headers, ...

SKU: AF-4876

A matching pair of 6-pin JST XH-compatible cables — one with an inline plug and one with an inline socket — for easy connect-and-disconnect wiring. The 2.5mm pitch connectors friction-lock together for a secure, reliable connection that's easy to separate when needed. Each cable is 20cm long wit...

SKU: AF-1349

A really tiny portable inverter for EL wire. Powers off of a single AAA battery (not included!), it can drive up to 50cm / 20 inches of our high-brightness EL wire or 10cm x 1cm long piece of EL tape for 3 hours (or longer if the EL wire is less than 50cm long). There is a switch on the side f...