All Products

SKU: AF-405

A 2.5 m length of high-brightness orange electroluminescent (EL) wire, pre-cut and pre-soldered with a standard quick-connect plug. This 2.6 mm diameter wire uses the latest phosphor technology to produce twice the brightness of standard 2.3 mm EL wire, emitting 70 cd/m² at 1.5 kHz / 90 V with a ...

SKU: AF-358

A compact and colourful 1.8" TFT LCD breakout with a built-in microSD card slot, perfect for adding a bright display to any microcontroller project. It communicates over 4-wire SPI and includes its own pixel-addressable frame buffer, so it works with virtually any microcontroller — even those wit...

SKU: AF-3199

The Adafruit MiCS-5524 Gas Sensor Breakout is a robust MEMS sensor from SGX Sensortech for detecting carbon monoxide, natural gas leaks, alcohol, and volatile organic compounds (VOCs). It provides a simple analogue voltage output that increases in proportion to the concentration of detected gas —...

SKU: SF-BOK-11135

The Android operating system is becoming more and more popular among embedded device manufacturers making it evermore practical to create devices that can interface with Android. Now you can create your own electronic devices with the popular IOIO (“yoyo”) board, and control them with your Androi...

SKU: AF-300

A pack of 25 super-bright clear green 5 mm LEDs with a narrow 20° beam angle and 8 000 mcd typical brightness. Ideal for indicator lights, breadboard projects, and anywhere a focused, high-intensity green LED is needed. Specifications Quantity – 25 LEDs Diameter – 5 mm Colour – Green (520 nm...

SKU: SF-KIT-13320

The SparkFun Inventor’s Kit for Photon is a great way to get started in the fresh IoT world and WiFi development. The SparkFun Inventor’s Kit for Photon provides you not only with the Photon RedBoard but everything you need to hook up and experiment with multiple electronic circuits! With the Pho...

SKU: AF-184

Build your own breadboard-friendly adjustable power supply with this soldering kit. Based on the MIC2941 low-dropout regulator, it provides a guaranteed 1.25A output with only 40–400 mV dropout — far better than the LM317's typical 1.25–2.0V. This means you can generate 3.3V from as low as 3.7V i...

SKU: AF-3000

Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in? Circuit Playground is here - and it's the best way to practice programming on real hardware with no soldering or sewing required! This is the Classic version of Circuit Playground, which come...

SKU: SF-DEV-13741

In 2015 we developed the BadgerStick as a fun and interactive way for people to learn about soldering and engage with SparkFun products at the multiple trade shows we appeared at. In 2016 we have refined the BadgerStick into what you see here, the SparkFun RedStick! The RedStick combines some of ...

SKU: AF-2923

The Adafruit Latching Mini Relay FeatherWing lets you control mains-powered devices and small appliances using any Feather microcontroller. Switch lamps, fans, solenoids, and other loads rated up to 250 VAC or DC — all from a compact FeatherWing form factor. This is the latching version, which u...

SKU: AF-2895

The Adafruit Non-Latching Mini Relay FeatherWing lets you control mains-powered devices and small appliances using any Feather microcontroller. Switch lamps, fans, solenoids, and other loads rated up to 250 VAC or DC — all from a compact FeatherWing form factor. This is the non-latching version,...

SKU: AF-2922

Add datalogging capability to any Feather board with the Adalogger FeatherWing. This add-on combines a battery-backed real-time clock (PCF8523) with a microSD card socket, giving your project accurate timestamps and local data storage in one compact wing. The RTC communicates over I2C with a 32 ...

SKU: SF-DEV-13912

The Spectacle Director Board controls all the actions in a Spectacle project. Though the Director Board doesn’t do too much on its own, it is what communicates directly with SparkFun’s Spectacle programmer and is the primary distribution channel for power and data in the system. To fully utilize ...

SKU: DF-ROB0103

Owning a spiderman is a colorful dream in everyone's childhood. Here is the cute DIY Spider Robot making your dreams come true. With the DIY Spider Robot, you can design and manufacture a robotic creature as your wish and under your control! Battery(1.2V) is included. Turn on the switch, you'...