All Products

SKU: LB-LR0002

The 5V 1-Channel Relay Board Module provides a simple way to switch high-voltage loads from your Arduino, Raspberry Pi, or other microcontroller project. Controlled via a 5–12V TTL signal, this relay can switch loads up to 250V AC, making it suitable for controlling lights, fans, pumps, and other...

SKU: SS-106990021

The 5V/3.3V Breadboard Power Supply plugs directly into a standard breadboard and provides regulated 5V or 3.3V power to both rails. It accepts power via either a 7–15V DC barrel jack or a 5V Micro-USB input, giving you flexible options for powering your prototyping projects. Designed by Seeed S...

SKU: DF-DFR0884

This dual-USB step-down buck converter accepts 8–32V DC input and delivers a regulated 5V output at up to 3A across two USB Type-A ports simultaneously. With over 85% conversion efficiency and built-in reverse-connection and overload protection, it provides a compact and reliable way to power USB...

SKU: DF-FIT0641

This 1-metre USB-A to USB-C cable supports both data transfer and power delivery at up to 5V/3A (15W). It provides a reliable connection for charging and programming USB-C devices including the Raspberry Pi 4B, Jetson Nano, and other USB-C-enabled development boards and phones. Key Features Po...

SKU: AF-1466

This UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 4A (4,000mA / 20W) via a standard 5.5×2.1mm centre-positive DC barrel jack. It accepts 110–240V AC input and is ideal for powering LED matrices, NeoPixel strips, and other high-current 5V projects. Key Featur...

SKU: AF-5367

This 5W ETFE solar panel from Voltaic Systems delivers a nominal 5V at up to 940mA peak, providing reliable power for portable electronics, battery charging, and off-grid projects. It uses 10 high-efficiency monocrystalline SunPower cells rated at over 22% efficiency. The panel is constructed wi...

SKU: EC-DIY19560P

This compact brushless submersible pump operates on 3.5–9V DC via a USB connector, making it easy to power from a USB power bank, solar panel, or development board. It delivers up to 200L/h flow and can push water up to 1.5m in height, with low noise and low power consumption. The pump uses a hi...

SKU: DF-FIT0878

This 5V COB LED strip produces bright, uniform blue light (465nm) with no visible hotspots or shadows. It uses 16 chip-on-board LEDs encapsulated in silicone for protection and longevity, and runs on just 5V DC — making it easy to power from USB, battery packs, or microcontrollers. The strip is ...

SKU: TB-MP3144

An ultra-slim switchmode power adaptor that delivers 5V DC at 1A through a compact, lightweight design. Slim enough to sit side by side on a power board without blocking adjacent outlets. Features built-in EMI filtering, short circuit protection, over-current protection, and thermal shutdown for...

SKU: AF-3875

This 5V electromagnet provides 25kg of holding force when energised with approximately 5V DC (4–6V working range). When the power is switched off, the magnet loses its magnetic field, making it suitable for controllable locking, sorting, and pick-and-place applications. Since it behaves as an in...

SKU: DF-FIT0836 · MPN: FIT0836

Add warm-white accent lighting to tight builds with this ultra-thin, low-power flexible LED strip from DFRobot. At just 2.5mm wide and 1mm thick, it is well suited to ultra-narrow spaces where standard LED strips are too bulky.The strip runs from 5V and provides 60 LEDs per metre, making it a han...

SKU: DF-SEN0523

This IR break-beam photoelectric switch detects objects by sending an invisible infrared beam from an emitter to a receiver. When a non-transparent object passes between the two and breaks the beam, the receiver outputs a signal. It works over distances up to 4 metres with a fast 0.5ms response t...

SKU: DF-FIT0658

This compact 5V inductive proximity switch detects metal objects at distances up to 4mm without physical contact. It features an NPN normally-open output, a fast response time under 1ms, and a 1,000Hz switching frequency — making it reliable for high-speed detection applications. With an IP67 pr...

SKU: DF-DFR0937

This wireless LED lamp pack uses magnetic resonance coupling technology to power 10 LEDs without any wires or batteries. A transmitting coil creates a non-radiative magnetic field that wirelessly transfers energy through air, paper, or plastic to small receiver coils built into each LED bead — li...

SKU: DF-FIT0750

This 50cm programmable RGB LED strip uses SK6812 (5050) COB LEDs to produce bright, uniform, full-colour light with no visible hotspots. With 166 individually addressable LEDs packed into just half a metre, it delivers smooth colour blending and high-density illumination. The strip runs on 5V DC...

SKU: TB-SY4036

This small, lightweight 5V SPST reed relay is designed for PCB mounting in a standard DIL (Dual In-Line) package. It switches up to 1A DC with a low 0.1W power consumption, making it suitable for low-power switching applications in sensor circuits, security systems, and instrumentation. Key Feat...

SKU: AF-6105 · MPN: ADA6105

This compact 3cm USB-powered cooling fan provides instant airflow to prevent electronics from overheating. Simply plug it into any USB port for immediate cooling, or cut off the USB connector to wire it directly to a 5V power source. The fan includes front and back protective grills along with m...

SKU: AF-6101 · MPN: ADA6101

This 4cm USB-powered cooling fan provides instant airflow to prevent electronics from overheating. Simply plug it into any USB port for immediate cooling, or cut off the USB connector to wire it directly to a 5V power source. The fan includes front and back protective grills along with mounting ...

SKU: AF-6099 · MPN: ADA6099

This 5cm USB-powered cooling fan provides instant airflow to prevent electronics from overheating. Simply plug it into any USB port for immediate cooling, or cut off the USB connector to wire it directly to a 5V power source. The fan includes front and back protective grills along with mounting ...

SKU: AF-6103 · MPN: ADA6103

A compact 60mm USB-powered cooling fan that provides instant airflow for electronics projects. Simply plug into any USB port for immediate cooling — no drivers or setup required. The USB connector can be cut off to wire the fan directly to a 5V power source. While there's no built-in PWM or feed...