All Products

SKU: SF-GPS-30975 · MPN: GPS-30975

Built around the u-blox ZED-F9T-20B receiver, this breakout is made for projects where precise time matters as much as location. Under clear skies it can provide five nanoseconds of timing accuracy without requiring external GNSS correction data, making it suitable for 5G IoT networks, distribute...

SKU: SF-GPS-28019 · MPN: GPS-28019

This high-precision positioning breakout is built around the Quectel LG580P GNSS module, giving projects centimetre-level RTK positioning plus instantaneous heading when used with two GNSS antennas. Unlike systems that need to move before they can infer direction, the dual-antenna setup can deter...

SKU: SF-SEN-27544 · MPN: SEN-27544

When the ADC built into your microcontroller is not precise enough, this Qwiic breakout adds a high-resolution Texas Instruments ADS1219 for measuring very small analogue voltage changes.The board provides four channels of 24-bit analogue input, which can be used as four single-ended inputs or co...

SKU: SF-GPS-26620 · MPN: GPS-26620

Built around the Quectel LG290P, this compact RTK GNSS breakout is designed for high-precision positioning projects that need quad-band, multi-constellation reception. It follows the same board dimensions, pin layout and connectors as SparkFun’s GPS-RTK-SMA Breakout - ZED-F9P (Qwiic), making it a...

SKU: SF-GPS-23288 · MPN: GPS-23288

Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in challenging environments such as dense city streets.The breakout provides five s...

SKU: AF-6402 · MPN: ADA6402

Keep your Adafruit TPS61169 Constant Current Boost Converter for LEDs protected during use and transport with this compact snap-on enclosure. It has been custom-designed and 3D printed to fit the breakout and its surrounding parts.No screws or glue are needed: snap the board into the bottom piece...

SKU: SF-GPS-29208 · MPN: GPS-29208

Built around Septentrio’s mosaic-G5 P3, this compact GNSS RTK breakout is designed for projects that need survey-grade positioning without giving up space or power budget. It offers the same leading performance as the mosaic-X5 in a package that is 60% smaller and consumes 40% less power.The rece...

SKU: SF-GPS-28871 · MPN: GPS-28871

This GNSS RTK breakout brings the u-blox X20 engine to a maker-friendly board for high-precision positioning projects. It is designed around the ZED-X20P all-band receiver and can process signals from GPS, Galileo, BeiDou, QZSS and NavIC across all GNSS frequency bands, including L-band.The board...

SKU: AF-6455 · MPN: ADA6455

Build a digital nose for indoor air quality projects with this SGP41 gas sensor breakout. The Sensirion SGP41 is a fully integrated MOX gas sensor with I2C interfacing, so you do not need to manage heater control or analogue readings yourself.The sensor combines two MOX hot-plate sensing elements...

SKU: AF-4503 · MPN: ADA4503

Add motion and orientation sensing to your project with this compact 6 Degree of Freedom IMU breakout built around the ST LSM6DS3TR-C. It combines a 3-axis accelerometer for measuring gravity and acceleration with a 3-axis gyroscope for measuring spin and twist.The breakout includes voltage regul...

SKU: SF-SEN-30381 · MPN: SEN-30381

This breakout pairs the Feyman (FMI) IM19 9DoF IMU with a board layout made for high-accuracy PNT and RTK GNSS projects. It combines MEMS sensor data with external GNSS RTK positioning information to provide precise attitude measurements and tilt compensation for survey-style workflows.The IM19 i...

SKU: SF-BOB-31206 · MPN: BOB-31206

Generate a real analogue output from your microcontroller instead of relying on PWM. This MCP4725 breakout is a 12-bit Digital-to-Analogue Converter (DAC) that outputs precise voltage levels over an I2C/Qwiic connection.It is useful for projects that need smoother control signals, such as sound g...

SKU: SF-SEN-29528 · MPN: SEN-29528

Add motion sensing to your project with this Qwiic-enabled LIS3DH breakout. The LIS3DH is a smart, low-power, three-axis capacitive micro-machined accelerometer with 12-bit resolution, suited to translation, motion, orientation and tap detection.This board is classified as a 3DoF, or 3 Degrees of...

SKU: SF-DD-21211 · MPN: DD-21211

The Hydra is a handy USB power breakout cable for powering maker projects from a USB power supply or computer. It brings out the USB 5V and GND lines so you can connect them to common project power inputs without building a one-off cable yourself.At the output end, the cable breaks power out to t...

SKU: AF-5839 · MPN: ADA5839

This breakout makes it much easier to add a higher-resolution camera to capable microcontroller projects. It uses the OV5640 image sensor with a 5 Megapixel sensor element and a 120-degree wide-angle lens designed for minimal fish-eye distortion, making it a good fit for machine vision, snapshot ...

SKU: AF-5832 · MPN: ADA5832

This breakout brings the INA228 power monitoring chip out to an easy-to-use board for measuring DC current, bus voltage and calculated power on either the high side or the low side of a circuit. It combines a wide common-mode range of up to +85VDC with a 20-bit ADC, giving you precise readings fr...

SKU: AF-6432 · MPN: ADA6432

This breakout is built around TI's ADS122C04, a high-resolution analogue-to-digital converter that lets you measure very small single-ended or differential signals over I2C. It offers 24-bit conversion with data rates up to 2 kSPS on one channel, making it a strong fit for scientific, industrial,...

SKU: AF-2219 · MPN: 2219

It's a mini HDMI decoder board! So small and simple, you can use this board as an all-in-one display driver for TTL displays, or perhaps decoding HDMI/DVI video for some other project. This breakout features the TFP401 for decoding video, and for the touch version, an AR1100 USB resistive touch...

SKU: AF-2028 · MPN: 2028

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2,Pi 3! (Any Pi with 2x20 connector)The Raspberry Pi has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you ...

SKU: PR-PIM375

A really sophisticated and accurate colour and luminance sensor breakout that's Raspberry Pi and Arduino compatible. As well as detecting RGB colour and light level, it has added bells and whistles like 50/60Hz light noise rejection, a wide detection range, and two illumination LEDs. T...