All Products

SKU: DF-KIT0090

The Insectbot Hexa is a six-legged walking robot kit based on the Beetle BLE (Arduino-compatible with Bluetooth 4.0). Designed for kids and beginners, this DIY kit teaches soldering, assembly, and basic programming through a hands-on robotics project. Powered by three 9 g micro servos and four A...

SKU: DF-DFR0165

Say goodbye to messy cables and clueless pluging/unpluging! This Sensor Shield is a powerful expansion shield for Arduino Mega Due. It is large enough to carry up to 3 Xbee slots, 1 microSD slot and shield headers for most Arduino shields on the market. Besides, we also added a prototyping ar...

SKU: DF-DFR0285

The Beetle shield is designed to attach a Beetle (DFR0282) controller for easy connecting servos and sensors. ​ SPECIFICATIONS Operating voltage: 3 - 5V Compatible with DFRobot Beetle DOCUMENTS Wiki( Beetle shield) SHIPPING LIST ...

SKU: AF-169

Tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor contro...

SKU: AF-155

This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box. Comes with 3 horns, as...

SKU: PL-1121

A 120:1 plastic gearmotor with a 90° output shaft — the output is perpendicular to the motor axis, making it a compact choice for small robot designs where side-mounted wheels or mechanisms are needed. The enclosed gearbox and low-current brushed DC motor run on 3–12V, with a built-in safety clut...

SKU: DF-FIT0300

This is a 2 DOF robot gripper that can be installed with 2 servos so as to control gripper opening and closing with one servo, and steering gear motion control (or rotation) with the other servo. Velocity range is 0 to 54 mm (0 to 2.13"). Total weight about 45 g. The servo slot fit most...

SKU: DF-FIT0334

This 300mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is compatible with almost all of the RC servos.The connectors have gold-flashed conta...

SKU: SF-WIG-13872

The SparkFun Continuous Rotation (CR) Servo Trigger lets you control a hobby CR servo motor without any programming. Simply connect a servo and a switch, adjust the three onboard potentiometers, and the board handles everything — when the switch changes state, the servo transitions between two sp...

SKU: DF-FIT0335

This 500 mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is compatible with almost all of the RC servos.The connectors have gold-flashed cont...

SKU: DF-FIT0253

A 7.5 V DC wall adapter power supply with a DC 2.1 mm barrel connector, compatible with the Arduino power jack. The 7.5 V output is well suited for Arduino projects that need more than 5 V but where 12 V may be excessive — ideal for motor or servo applications that require a reliable mid-range vo...

SKU: DF-SER0033

Herkulex DRS-0201 is state of the art modular smart servos incorporating motor, gear reducer, control circutry and communications capability in one single package. Through metal brush coreless DC motor, it can provide torque up to 24kg.cm at 7.4v. Equipped with a lot of adapting piece...

SKU: DF-DRI0027

Some day,a guy want to make a robotic dog as a gift to his little son.He brought some digital servos, a microcontroller,Lipo batterys...Then he found it hard to drive these smart servos with Arduino processor! So we developed a driver board that can easily & quickly drive the digital servo...

SKU: AF-2928

The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your microcontroller — unlike the TLC5940 family, no continuous signal is needed. The ...

SKU: AF-2927

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Fem...

SKU: DF-FIT0296

A 150mm servo extension cable for reaching servos mounted further from the controller than the servo's built-in lead allows. Male connector plugs into the controller, female connector mates with the servo. Also works as a standard 0.1" jumper cable for general prototyping. Specifications Lengt...

SKU: DF-FIT0297

This is a 600mm (23.62") servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with servo. Fits all Hitec, Futaba, JR, Multiplex, and Airtronics...

SKU: SF-BOB-09118

This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. This board electrically isolates a controller from the high-power system by use of an opto-isolator IC. This IC has two LEDs and two pho...