All Products

SKU: SF-GPS-23288 · MPN: GPS-23288

Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in challenging environments such as dense city streets.The breakout provides five s...

SKU: SF-WRL-00593

PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These connectors have a female signal pin and will correctly mate with the original SMA type antennas.

SKU: SF-WRL-20855

Designed for 810-910 MHz (868MHz center frequency) this antenna is ideal for distant LoRa nodes. Utilizes an SMA connector and is 200mm long with a gain of 2dBi. Comes with the frequency laser printed on the antenna. Features: Frequency Range: 810-910MHz Center Frequency: 868MHz Gain: 2dBi Ant...

SKU: DF-FIT0872

A gold-plated IPEX (U.FL) to SMA male (inner needle) pigtail cable for connecting wireless modules to external antennas. The gold-plated connectors have passed 48-hour salt spray testing for long-lasting corrosion resistance. Built with RG1.13 wire and a high-density shielding layer, this cable ...

SKU: AF-5348

The Adafruit QT Py ESP32-S2 with uFL Antenna Port is the extended-range version of the QT Py ESP32-S2. Instead of an on-board antenna, it features a uFL connector so you can attach any 2.4 GHz Wi-Fi antenna for significantly better range — ideal for projects where the board is enclosed in a metal...

SKU: SF-WRL-20856

A 433MHz antenna that utilizes an SMA connector and is 200mm long with a gain of 2dBi. Comes with the frequency laser printed on the antenna. Features: Frequency: 433MHz Gain: 2dBi Antenna Length: 200mm Connector: SMA Plug Articulating Base Documents: Technical Drawing

SKU: AF-4644

This is a great connector for anyone doing RF work, when a straight SMA connector is required. Solder it into your PCB for a very secure mechanical connection. You've probably seen tons of these on various development boards! The four mechanical connectors also act as the RF ground.Mates with any...

SKU: AF-4415

The Adafruit Mini GPS PA1010D is a compact 25×25 mm GPS/GNSS breakout with a built-in patch antenna, dual UART and I2C interfaces, and STEMMA QT connectors for solderless plug-and-play use. Powered by the MTK3333 chipset, it supports GPS, GLONASS, Galileo, and QZSS satellite systems with up to 10...

SKU: SF-GPS-23088 · MPN: GPS-23088

The SparkFun Triband GNSS RTK Breakout features Septentrio's mosaic-X5, an ultra-low power multi-band, multi-constellation GNSS receiver capable of delivering centimeter-level precision. Supporting L1, L2, and L5 bands simultaneously, this breakout provides access to GPS, GLONASS, Beidou, Galileo...

SKU: AF-3060

The Adafruit ATWINC1500 WiFi Breakout with uFL Connector adds 802.11b/g/n WiFi connectivity to your Arduino or other microcontroller project over SPI. This version features a uFL antenna connector instead of an onboard antenna, allowing you to use an external antenna for improved range or placeme...

SKU: AF-3073

The Adafruit RFM95W LoRa Radio Transceiver Breakout lets you send data over very long distances using the 433 MHz licence-free ISM band. Based on the SX1276 LoRa chipset, this breakout achieves ranges of approximately 2 km line of sight with a simple wire antenna — or up to 20 km with directional...

SKU: SF-GPS-19576

When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or car with a clear view of the sky while you stay in doors and warm at your keyboard. This 2m (6.5ft) magnetic mount SMA extension does a great job of connecting your receiver or radio to a distan...

SKU: SF-GPS-29205 · MPN: GPS-29205

The W3062A is a low-profile ceramic chip antenna from Pulse Electronics, suited to compact RF designs where board space is tight.It operates across a 1.565GHz ~ 1.585GHz frequency range with a 1.575GHz centre frequency, using a single-band chip antenna format.The antenna is designed for surface-m...

SKU: AF-1661

uFL connectors are very small surface-mount parts used when an external RF antena is desired but a big bulky SMA connector takes up too much space. We use this part on our GPS and WiFi boards, they're great! Chances are your antenna doesn't use uFL as the main connector, in which case you should ...

SKU: SF-GPS-17722 · MPN: GPS-17722

Built around the u-blox ZED-F9P, this MicroMod carrier gives your project high-precision GNSS and RTK positioning in a swappable, solderless MicroMod format. It supports rover and base station operation, with RTK accuracy down to millimetre-level positioning when used with suitable correction dat...

SKU: AF-3232

Add long-range LoRa radio to any Feather board with the Adafruit LoRa Radio FeatherWing. Built around the SX127x LoRa module, this add-on provides kilometre-range packet radio communication at 433 MHz — perfect for sensor networks, remote monitoring, and bridging to the Internet via a WiFi or cel...

SKU: SF-WRL-30232 · MPN: WRL-30232

This RP-SMA connector is designed for edge-mounting onto a PCB, making it handy for RF prototyping and compact antenna connections.It is suited to GPS and cellular projects that need an external antenna connection brought directly to the board edge. Each connector is fitted with a female signal p...