All Products
AI Overview
Here are solid options depending on which gas you need to detect and whether you want simple analog sensing or calibrated digital measurement.
Budget MQ-series (analog, good for hobby leak detection)
- Gravity: Arduino Gas Sensor (MQ2) ($11.80) — detects LPG/i-butane/propane/methane/alcohol/hydrogen/smoke (broad, general-purpose).
- Gravity: Arduino CO/Combustible Gas Sensor (MQ9) ($13.10) — focused on CO + combustible gases (methane/propane).
- Methane CNG Gas Sensor - MQ-4 ($14.95) — methane / natural gas.
- LPG Gas Sensor - MQ-6 ($14.95) — propane/butane (LPG).
- Hydrogen Gas Sensor - MQ-8 ($16.00) — hydrogen.
- Alcohol Gas Sensor - MQ-3 ($18.35) — alcohol / breathalyzer-style sensing.
- If you already have an MQ “can” sensor and need an adapter/carrier: Gas Sensor Breakout ($3.05) or Pololu Carrier for MQ Gas Sensors (Bare PCB Only) ($2.25).
Indoor air quality / VOC sensing (digital I2C breakouts)
- SGP41 VOC & NOx Gas Sensor Breakout ($49.05) — I2C sensor for VOC + NOx indices (great for IAQ projects).
- Adafruit ENS160 MOX Gas Sensor - Sciosense CCS811 Upgrade ($45.40) — I2C MOX gas sensor aimed at IAQ/eCO2/TVOC-style outputs.
- Adafruit MiCS5524 CO, Alcohol and VOC Gas Sensor Breakout ($30.80) — analog-style breakout useful for CO/alcohol/VOC type detection.
CO2 sensors (choose “true CO2” when you need real ppm)
- Gravity: STCC4 True Carbon Dioxide (CO2) Sensor (3-in-1 Air Quality Monitoring, 400 ~ 5000ppm) ($36.65) — 400–5000 ppm, compact option for typical indoor monitoring.
- Adafruit SCD-30 - NDIR CO2 Temperature and Humidity Sensor - STEMMA QT / Qwiic ($131.55) — true NDIR CO2 with temperature + humidity, good accuracy for IAQ.
- For building/industrial style installs: DFRobot SEN0659 Industrial RS485 NDIR CO2 Sensor - 400-5000ppm ($142.60) — RS485, IP65, 400–5000 ppm.
Factory-calibrated specialty gas sensors (higher cost, better specificity)
- Gravity Calibrated NH3 Ammonia Sensor - I2C/UART ($336.60) — calibrated ammonia (NH3) with analog/I2C/UART outputs.
- Gravity HF Gas Sensor (Calibrated) - I2C/UART/Analogue ($611.95) — calibrated hydrogen fluoride (HF) with analog/I2C/UART outputs.
What gas (or use-case) are you trying to measure?
Collections
Showing 41-60 of 92 products · 8 unavailable products hidden
TVOC Gas Sensor – High Sensitivity, Long Lifespan, Low Power
·
TVOC Gas Sensor: Your Sentinel for Air PurityBreathe easier and stay assured of the air quality around you with our advanced TVOC (Total Volatile Organic Compounds) Gas Sensor. Designed for seamless integration into air treatment systems and quality monitors, this compact yet powerful sensor is t...
DIY Gas Detector - Learn to solder
MQ-2 Gas Sensor - Smoke & Flammable Gas Detector The MQ-2 is a reliable, easy-to-use gas sensor that’s ideal for detecting flammable gases like LPG, methane, propane, and even smoke. At its core is tin dioxide (SnO₂), a material with low conductivity in clean air. But when flammable gas is pres...
Gravity Calibrated NH3 Ammonia Sensor - I2C/UART
·
This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontroller and single-board computer projects.The probe is factory-calibrated for quick s...
Gravity Factory-Calibrated Laser Methane CH4 Sensor
·
This lab-grade methane sensor is designed for quantitative CH₄ measurement in research settings, using TDLAS technology to report methane concentration in %LEL rather than the broad estimates typical of MQ-style gas sensors.It is factory calibrated and intended for reliable data collection in com...
Carbon Monoxide Sensor - MQ-7
This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm. This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circui...
Gravity: Arduino Alcohol Sensor (MQ3)
An analogue alcohol gas sensor based on the MQ-3 probe, designed for use with Arduino and other microcontrollers. The sensor outputs a voltage proportional to the concentration of alcohol vapour in the surrounding air, making it suitable for breathalyser-style projects, air quality monitoring, an...
Carbon Monoxide Sensor (MQ7)
The MQ7 is a simple-to-use Carbon Monoxide (CO) sensor suitable for detecting CO concentrations in the air. It offers a wide detection range from 20 to 2000 ppm, making it ideal for safety monitoring and air quality projects. The sensor outputs an analog resistance that varies with CO concentrat...
Gravity: Arduino Carbon Monoxide Sensor (MQ7)
INTRODUCTION This is an Arduino Carbon Monoxide Sensor. It uses MQ7 probe to detect Carbon Monoxide (CO) concentrations in the air from 20 to 2000ppm. The sensitivity can be adjusted by the potentiometer. The output is proportional to the density o...
Alcohol sensor for Arduino
An alcohol sensor module for Arduino with both digital (TTL) and analog output. It detects alcohol vapour in the 10–1000 PPM range, with analog output voltage increasing proportionally with concentration. The module also responds to LPG, natural gas, city gas, and smoke. The board features a pow...
Octopus Smoke Sensor MQ-2 Brick OBMQ2
An analogue gas sensor module based on the MQ-2 sensor, part of the Octopus Electronic Bricks series for plug-and-play integration with Arduino and compatible boards. Detects a wide range of combustible gases and smoke with high sensitivity and fast response time. Detectable Gases LPG, i-butane...
Octopus MQ3 Alcohol Sensor Brick
The Octopus MQ3 Alcohol Sensor Brick from ElecFreaks is an analogue gas sensor module with high sensitivity to alcohol vapour. It outputs an analogue voltage proportional to the detected alcohol concentration, making it straightforward to interface with Arduino and other microcontrollers. The MQ...
Gravity: IIC Ozone Sensor (0-10ppm)
The Gravity IIC Ozone Sensor measures ozone (O₃) concentration from 0 to 10 ppm with 10 ppb resolution using an electrochemical sensing element. Factory-calibrated for accurate readings out of the box, it connects via I2C through DFRobot's Gravity 4-pin interface. Compatible with Arduino, ESP32,...
Smoke Sensor - MQ-2
The MQ-2 is a smoke and combustible gas sensor manufactured by Winsen. It detects flammable gases and smoke in a concentration range of 300–10,000 ppm, with particularly high sensitivity to propane and smoke. It's widely used in domestic gas leakage alarms and portable gas detectors. The sensing...
Gravity: Alcohol Sensor (0-5ppm)
This is an Arduino compatible alcohol sensor module from DFRobot with a 0-5ppm measuring range, supporting I2C and UART outputs. Aiming at fast and accurate detection of alcohol gas concentration in the air, the sensor is well applicable to the small alcohol concentration measurement in...
Gravity: CO Sensor (Calibrated) - I2C & UART
This is a sensor that detects carbon monoxide and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of carbon monoxide in the environment. Can be widely applied to fields like portable devic...
Gravity: O2 Sensor (Calibrated) - I2C & UART
This is a sensor that detects oxygen concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of oxygen in the environment. Can be widely applied to fields like portable devices, ...
Gravity: H2S Sensor (Calibrated) - I2C & UART
This is a sensor that detects hydrogen sulfide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of hydrogen sulfide in the environment. Can be widely used in the detection...
Gravity: STCC4 True Carbon Dioxide (CO2) Sensor (3-in-1 Air Quality Monitoring, 400 ~ 5000ppm)
·
This Gravity air quality module uses Sensirion’s STCC4 gas sensing chip to directly measure carbon dioxide with the thermal conductivity measurement principle. It is designed for compact, cost-effective indoor monitoring nodes where stable CO₂ readings are needed without complex hardware integrat...
Adafruit TMP119 ±0.03°C I2C Temperature Sensor
·
Built around Texas Instruments' TMP119, this breakout makes it easy to add extremely accurate temperature monitoring to your project over I2C. It is designed for applications where temperature really matters, including thermostats, cold chain asset tracking, and gas or heat metering, and it can a...
STCC4 + SHT41 CO2, Temperature & Humidity Sensor
·
This compact breakout combines the STCC4 CO2 sensor with a Sensirion SHT41 temperature and humidity sensor for convenient indoor air monitoring. The STCC4 measures true CO2 using a thermal conductivity method rather than estimating from VOCs, and the onboard SHT41 helps improve the CO2 measuremen...
